haeusler sheet metal working used for sale

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Technical data: 4 bending rolls Max bending range: 3,000 mm external switching and Control Panel, as well as counter holder

Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm

- New ( 2026) Digital read out position side rolls - Hydraulic drop end - Minimum bending diameter 420 mm - Full hydraulic machine - Roll quality C60 900N/mm2

- Set universal rolls - Horizontal and Vertical positioning - Hydraulic machine - Scales for position side rolls

Manufacturer: HAEUSLER Model: HPR 330 V+H Year of Manufacture: 2007 Approximately 10 pallets of tools for round bar processing are included, with diameters of 60.5, 137, 91, 168, 76, 51, 152, 129, etc. Condition : Machine currently not in use and therefore not fully assembled Technical Data: - Maximum bending moment (at 240 N/mm² yield strength): 200–330 cm³ - Number of bending rolls: 3 - Roll arrangement: asymmetric / symmetric - Roll diameter: 520 mm - Driven rolls: all 3 - Roll drive: hydraulic - Working speed: 0–7 m/min, stepless - Speed compensation between upper and lower rolls: automatic - Roll rotation reversal: electro-hydraulic - Adjustable bending rolls: 2 - Adjustment of bending rolls: hydraulic - Roll position display: digital, 0.1 mm accuracy - Roll bearings: roller bearings - Number of pressure roller systems: 2 - Adjustment of pressure roller systems: hydrauli ...

Bending length: 4200 mm pre-bending: 34 mm Bending strength: 38 mm power capacity: kW Number of rollers: 4 Stk Adjustable rollers: Stk diameter of upper rolls: 540 mm diameter of lower rolls: 500 mm side roll diameter: 365 mm work speed: 0 - 8 m/min total power requirement: 55 kW weight of the machine ca.: 35 t Control: Haeusler Bendtronic 2.0 dimensions of the machine ca.: 7.5 x 2.1 x 2.4 m Equipped with: - Haeusler BENDtronic 2.0 control system - Smallest possible bending diameter with upper roller Ø540mm: 595mm (depending on springback) - Roller bearings: Self-adjusting roller bearings - Max. cylinder force against upper roller: 3,245kN - Roller material: 42CrMo4 (1.7225) - Speed compensation between upper and lower roller: automatic when the two-roller drive option is selected - Roller adjustment: hydraulic - Tilting of the lower roller and both side rollers for cone bending: infini ...

sheet width: 4000 mm plate thickness: 30 / 35 mm pre-bending: 30 mm diameter of upper rolls: 570 mm side roll diameter: 450 mm diameter of lower rolls: 540 mm bending speed: 4 m/min min. bending diameter: 650 mm total power requirement: 60 kW weight of the machine ca.: 52 to dimensions of the machine ca.: - m The machine was overhauled in 2022 Equipment: - Hydraulic 4-roller round bending machine - Roll material: 61 MnCrMo 43 - Driven rolls: 2 Top-and bottom roll -- Drive: over 2 hydro motors direct flanged -- Adjustment speed bottom roll: 0-200 mm/min -- Adjustment speed side rolls: 0-700 mm/min - Speed compensation between top-and bottom roll: automatic - Operation of the tilting bearing: hydraulic - Tilting of the top roll: hydraulic - Bearing block: hydraulic - Indicator device of roll position: digital The data for this ad was created with ModulMWS - the software solution of Logo ...

- Force lower rol upper roll 1178 Ton - Cone bending attachment - Hardned and grounded rolls - Width between upper and lower roll 200 mm - Power 180 kW

- Smallest bending diameter 640 mm - Pressing force against upper roll 5800 kN - Conical bending attachment - Central lubrication - Equipped for change rolls 570 / 500 / 430 mm

A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible.

Die EVO ist die neueste Innovation in der Blechbearbeitung. Sie ist mit zahlreichen innovativen und patentierten Funktionen ausgestattet, die Ihre Produktionskapazität und Produktivität erhöhen, und weist gleichzeitig die niedrigsten Gesamtbetriebskosten auf. Die hochwertigen Komponenten, die bei dieser Maschine verwendet werden, sowie die neueste Version der BENDtronic®-Steuerung, welche serienmässig auf allen EVO-Maschinen installiert ist, sind besondere Highlights. Ab Lager verfügbar: HAEUSLER EVO 31031 4-Walzen Rundbiegemaschine / Walzenbiegemaschine Hersteller: Haeusler Typ: EVO 31031 4-Walzen Rundbiegemaschine / Walzenbiegemaschine Ursprung: Deutschland / Schweiz Baujahr: 2024 Zustand: NEU, Austellungsmaschine Verfügbarkeit: sofort Leistung: Arbeitsbreite 3100 mm Rundbiegeleistung 14 mm Anbiegeleistung 12 mm Nicht die Passende Maschine? Als Vertreter von Haeusl ...

Specificaties: 4 rollen Plaatbreedte: 3600 mm Diameter: 4000 mm Diameter van de bovenrol: 1500 mm Diameter van de zijrollen: 1100 mm Diameter van de onderste middenrol: 1450 mm 7000 ton Maximale dikte: 200 / 270 mm Maximale druk op de bovenste rol: 7300 ton Rolmateriaal 60CrMoV12.5 Hydraulische rotatieaandrijving Software: Beckhoff Besturing: Swiss Bend-IT Technology V.3.4.0 Luchtverbruik: 4 bar / 35 m³/u Afmetingen: 15000 x 7200 x 7890 Gewicht 750 ton IN TOPCONDITIE Number of rolls: 4 Roll capacity cold: 220 mm Roll capacity warm: 270 mm Type: VRM Hy 36-4712 Roll dia upside: 1500 mm Dia under roll - side rolls: 1450 / 1100 mm Driven rolls: Centre top and bottom rolls driven Power needed: 850 kW Length: 15 000 mm Depth: 7200 mm Hight: 7890 mm Weight: 750 ton

HAEUSLER Dishing press: - Max. force 1000 Ton - Retraction force 82.5 Ton - Approach speed 260 mm/Sec - Working 10 - 30 mm/Sec - Return speed 370 mm/Sec - Pressure 253 Bar   - Distance between column 9000 mm - Dimensions table plate 1500 x 1500 mm - Max Work piece diameter 8700 mm - Thickness at yield 450 N/mm2 90 mm   - Manipulator: - Max. dimanions 8700 x 90 mm - Min. dimensions table 1500 x 1500 = 3200 mm - Min. dimensions table 700 x 700 = 2200 mm - Work piece weight 42.000 Kg - Travelling speed 158 M/Sec - Power 165 kW - Weight 43000 Kg - Optional Dishing Dies (Gray GG-25) RUW 925 with    1500 diameter x R   950 – 1300 mm RUW 1205 with 1500 diameter x R 1305 – 1700 mm RUW  1520 with 1500 diameter x R 1705 – 2200 mm RUW 1905 with 1500 diameter x R 2205 – 2800 mm RUW 2395 with diameter 1500 x R 2805 – 3500 mm RUW 2885 with diameter 1500 x R 3505 – 4300 mm RUW 3515 ...

HAEUSLER FLANGING MACHINE HBM-HY 8700 x 90 mm   - Forming and Flanging rollers: - inclines positon 0 - 25 Degrees - Rotation sopeed 0 - 200 M/Min - Rapid adjustment speed 2500 mm/Min - Crawling speed 0 - 1200 mm/Min - Sleeve hydro mechanical rapid speed 6000 mm/Min   - Infeed carriage: - Work piece weight 42.000 Kg - Max. dished head 8300 mm - Min. dished head 1900 mm - Speed 20 M/Sec - Centering Automatic   - Data of Workpiece: - Cold 360 N/mm2 45 mm - Hot 360 N/mm2 90 mm - Min Knuckel Radius 100 mm - Max. Knuckel Radius 1200 mm - Min thickness dished 10 mm - Head diameter without device 2600 mm - Head diameter with device       1900 mm - Length off straight flange at flanged head 3,5 x thicness = 140 mm   - Hydraulic tank 2000 Liter - Power 350 kW - Form roller changing device in combi with lifgting sleeve - Auxiliary device for flanging heads from 1900 - 2600 x 25 mm thickness ...

WORLDWIDE UNIQUE OPPORTUNITY – ONE OF THE LARGEST AND MOST POWERFUL 4-ROLL PLATE BENDING MACHINES EVER BUILT BY HAEUSLER 4000 x 300 mm  Mach4Metal is proud to announce the acquisition of one of the largest and most powerful 4-roll plate bending machines ever manufactured by HAEUSLER, Switzerland. Only two identical machines of this exceptional size and capacity were ever built. The second machine is installed at Dillinger Hütte in Germany. With a total weight exceeding 800 tonnes, an extraordinary pressing force of more than 7,000 tonnes from the lower roll against the upper roll, and a plate rolling capacity of up to 300 mm thickness, this machine represents the highest level of heavy-duty plate forming technology.   A RARE OPPORTUNITY FOR MANUFACTURERS OPERATING IN THE WORLDS MOST DEMANDING INDUSTRIES. This extraordinary machine is particularly suitable for manufacturers specialis ...

WORLDWIDE UNIQUE OPPORTUNITY – ONE OF THE LARGEST AND MOST POWERFUL 4-ROLL PLATE BENDING MACHINES EVER BUILT BY HAEUSLER 3600 x 300 mm  Mach4Metal is proud to announce the acquisition of one of the largest and most powerful 4-roll plate bending machines ever manufactured by HAEUSLER, Switzerland. Only two identical machines of this exceptional size and capacity were ever built. The second machine is installed at Dillinger Hütte in Germany. With a total weight exceeding 800 tonnes, an extraordinary pressing force of more than 7,000 tonnes from the lower roll against the upper roll, and a plate rolling capacity of up to 300 mm thickness, this machine represents the highest level of heavy-duty plate forming technology. A RARE OPPORTUNITY FOR MANUFACTURERS OPERATING IN THE WORLDS MOST DEMANDING INDUSTRIES. This extraordinary machine is particularly suitable for manufacturers specialising ...

Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: ZR – 23M – 31”, reversing Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers

Qty. 1 Second-hand aluminium strip production plant Entry Material: Aluminium Scrap – HD666, AA5050, 2.5-3.0% Mg Final product: Aluminium strip (can stock) Width: 220 mm Thickness: 0.15 – 1.0 mm Mfc.: De Winter, Thermcon, Fata Hunter, Fröhling, Nederman, Burghardt & Schmidt, Siemens Built: 1984, 1999, 2000, 2002, 2014, 2015 Scope of supply: Melting Furnace Tilting Casting Furnace Block Caster 5 Stand Hot Rolling Mill 6 Stand Cold Rolling Mill Hot Gas Filter Slitter Welding Machine Treatment Furnace Quenching Unit Shear

Qty. 1 Second-hand strip rolling mill Mfc.: United Engineering Type: 4-Hi Built: Strip Width: 393 mm (15.5”) Thickness Entry: 4 mm (0.16”) Exit: 1.2 mm (0.05”) Mill Speed: 405 m/min. (1330 Fpm) Strip Tension: 2670 kg (5875 Lbs) Coil ID 406 mm (16”) Coil OD 1448 mm (57”) Coil weight: 3180 kg (7000 lbs)

material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

guillotine shears AG TS 2 Working thickness 2mm Adjustable stop Hold Length 1.80 m Width 1 m Height 1.40 m Weight 300 kg

Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

LASER PRIMA INDUSTRIE Mod. 2D/3D DOMINO Year 2006 1500x3000 2.5 kw 22,000 working hours Visible in operation No loading and unloading

Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

55 ton multi station

Manufacturer: SATO Model: DHDS 3100 Year of Manufacture: 2017 Estimated operating hours: 16,000 hours - Plasma cutting system with table and extraction system. - Cutting area: 2 x 6 meters. - Equipped with plasma unit and 2 oxy-fuel torches. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Amada Model: LST 3015-M2 Year of Manufacture: 2011 Power Required: 4 kVA Noise Level: 70 dB(A) Weight: 1950 kg Operating Hours: 30,000 hours Pallet Capacity: - Maximum sheet size: 3050 x 1525 x 25 mm - Maximum load: 920 kg Amada 4 kW laser cutting system including shuttle table and extraction system. Operated in single-shift production, no maintenance backlog. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Leaking oil working condition, hardly used Auction-ID: A3-46142-11240

Manufacturer: Amada Year of manufacture: 1999 Model: GS 630 Type of machine: Hydraulic Shear Cutting force: 197 KN Power: 5.5/7.5 KW/HP Stroke: 160 mm Voltage: 400/415 Volts Amperage: 16 A Frequency: 50 Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Prinzing Model / Type: FME 4-600 Type of machine: Flanging machine Year of manufacture: 2012 Thickness: 4.0 mm Length: 65 mm Weight: 3650 kg Voltage: 400 V Power: 12 kW Current: 8.5 A Certification: CE Condition: Only has training hours on it Find more here - .ucymachines/ Contact us at - sales@ucymachines

Cidan CNC guillotine shears in top condition (please note, the matching shears are also available) with rotatable upper beam 3m x2.5mm – with CNC control and depth stop, The scissors are in very good technical and optical condition, all bearings are perfect. The machine comes from a small business/first owner and is accordingly well maintained and maintained. Ideal for tinsmiths, roofers, carpenters, metalworkers or workshops looking for a precise and reliable bending machine.

Manufacturer: Kemmerich Model: VD 3000 UF-SH-520-S Type of Machine: Double Decoiling Reel / Uncoiler Year of Manufacture: 1999 Technical Specifications: - Band width: 100 to 520 mm - Band thickness: 0.5 to 2.5 mm - Maximum coil weight: 3,000 kg - Spreading range diameter: 470 to 520 mm - Maximum coil outer diameter: 1,600 mm - Maximum band speed: 25 metres per minute - Reel crown rotation speed: 1 to 15 rpm - Drive power: 2.6 kW - Connection voltage: 480 V AC, 60 Hz - Rated current: 16 A - Control voltage: 24 V DC - Cross shaft height: approximately 1,250 mm - Maximum load capacity per nameplate: 3,000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Swing cut shears Make: Simat Type: SST 3010 Year of Make: 1990 Cutting length: 3010 mm Sheet thickness: 10 mm -Cutting line lighting -Adjustable cutting gap - Motor power: approx. 19 kW -Backgauge Length: 3750 mm Width: 1700 mm Height: 1530 mm Weight approx. 8700 kg Return stroke by nitrogen cylinder Nitrogen cylinder: resealed in 2024 no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense.

This machine is suitable for unmanned loading and unloading of punched sheet metal on an AMADA Punching Machine. Suitable for plates up to 2500 x 1250 mm. Auction-ID: A1-47366-12

Power supply: 380-400 V, 3 ph, 50-60 Hz, Spindle speed: 45/90 RPM, Motor power: 1,3 -1,8 kW, Saw blade outer diameter: Ø250 mm, Saw blade bore diameter: Ø40 mm, Saw blade thickness: 2.5 mm, Number of teeth: 240. Auction-ID: A1-50595-27

Prepared for CNC control Siemens 840 DSL Precision turntable make EIMELDINGEN with aerostatic axial bearings Specifications Table diameter 5,600 mm Total height approx. 1,230 mm Centering bore Ø 250H7X 25 mm Permissible transport load 30,000 kg Holding torque of the table clamping 2,400 daNm Table speed 0.002 – 2 min Net weight approx. 30,000 kg Operating voltage 380 V, 50 Hz. 3 phases Control voltage 24V Positioning accuracy (without control errors) ± 1" Plan accuracy 0.02 mm Axial running accuracy 0.01 mm Concentricity deviation of the centering bore 0.01 mm Resolution of the displacement measuring systems 0.0001°

Angular table for lid milling machine Clamping flat 900x530mm 8 St T-hooks Never used

In 2020, the machine was extensively overhauled for 7000 €. Proof available. Processes: - Chamfering 60° - Longitudinal turning up to a maximum of 40 mm - Centering drilling Workflow fully automatic: - Tensioning, feeding to - Rapid traverse forward - Work feed - Dwell time for cutting - Rapid traverse back - Relax, feed on Specifications: workpiece diameter approx. 80 mm workpiece diameter 6kt-SW 70 mm min. workpiece diameter round and 6kt 10 mm min. workpiece length 450 mm Speed range infinitely variable Level I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1.3/1.8 Engine power Coolant motor kW 0.07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

Work platform, platform TALL ESCOPE No. 512 Load capacity: 115 kg Platform height: 2900 - 4400 mm Dimensions: 3600 x 1000 x 2000 mm Weight: 92 kg used, tested !

Machine is in good technical condition, a visit and a test run are possible by prior arrangement.

Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feeder Plain text display Compression Force Monitoring Wire straightener Bosch Stripping Devices Bracket and brush motor with mounted tool W32/1-32 Soundproof booth Fäßerb CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as shown in the pictures. Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

: für Draht hydraulically tiltable: ja : 2 t Year: unbekannt : Hydraulik Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centering machine for preparing axes to be machined on lathes such as Schaublin, Emco etc. The centering is automatic according to the diameter of the parts. Satisfactory condition, belt to be changed. Three-phase motor.

Power supply: 380V, 3 ph, 50 Hz, Electrical power: 0,75 kW, Copy router spindle motor: 0,75 kW / 380 V / 3 ph / 50 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm, Copy routing capacity: x: 260mm / y: 105 mm / z: 90mm, Router cutter dimensions: Length: 80-120 mm / Diameter: Ø8mm. Auction-ID: A1-50595-15

Power supply: 220V, 1 ph, 50 Hz, Total electrical power: 1,1 kW, Water slot milling spindle motors: 2 x 0,55 kW / 220 V / 3ph / 300 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm. Auction-ID: A1-50595-38

2 router cutters, each with an 8 mm cutting diameter and an 8 mm shank diameter, Motor power: 1,1 kW + 1,1 kW, Motor speed: 12000 rpm, Power supply: 380 Vac - 3 phases, Air consumption: 8 l/min. Auction-ID: A1-50595-30

Power supply: 380V, 3 ph, 50-60 Hz, Spindle speed: 2810 RPM, Total power: 1,8 kW, Air pressure: 6-8 bar, Air consumption: 41 lt/min, Min. processable profile length: 100 mm, Saw blade outer diameter: Ø400 mm, Maximum saw blade height: 140 mm, Saw blade bore diameter: Ø32, Saw blade thickness: 4,2 mm, Number of teeth: 120, Conveyor: Length: 500 + 300 cm / Width: 35 cm. Year 2012 Auction-ID: A1-50595-26

Three independent routing units: one vertical and two horizontal, for machining four sides without rotating the profile, Free routing both longitudinally and transversely, or template-guided copy routing, Steel stand, Lubrication system on each head, 2 quick-change universal copying templates, 4 horizontal pneumatic clamps, Motor power: 3 x 0,75 kW, Motor speed: 12000 rpm, Power supply: 230 Vac - single-phase, Air consumption: 8 l/min. Auction-ID: A1-50595-12

Air pressure: 7 bar, Air consumption: 55 lt/cycle, Crimping force: 2x3500 kgf, Min. profile height: 60 mm, Max. profile height: 200 mm, Max. profile width: 140 mm Auction-ID: A1-50595-3

Power supply: 380V, 3 ph, 50 Hz, Total electrical power: 1.1 kW, Air consumption: 5 lt/min + spray cooling, Air pressure: 6-8 bar, Spindle speed: 15350 rpm, Min. machinable profile height: 20 mm, Max. machinable profile height: 115 mm, Max. machinable profile width: 110 mm, Router cutter dimensions: 8x5x80/120mm. Auction-ID: A1-50595-43

Power supply: 380V, 3 ph, 50-60 Hz Spindle speed: 2810 RPM Total power: 1,5 kW Air pressure: 6-8 bar Air consumption: 41 lt/min Min. processable profile length: 100 mm Saw blade outer diameter: Ø350 mm Maximum saw blade height: 100 mm Saw blade bore diameter: Ø32 Saw blade thickness: 3,8 mm Number of teeth: 120 Conveyor: Length: 4000 mm / Width: 350 mm / Both sides. Auction-ID: A1-50595-42

Fully automatic sheet dispenser PAL-Cut 800 The Palcut 800 cuts paper quickly and precisely into intermediate sheets of the desired length, directly from the roll. Fully automatic sheeter PAL-Cut 800 sheet dispenser, which cuts intermediate layers quickly and precisely in the desired length. The sheet dispenser is suitable for continuous operation in an automatic palletizing system and for companies with high sheet consumption. The Palcut 800 works with rollers of max. 800 mm width. Type designation: PAL-Cut 800 Length: 1853 mm Width: 1380 Height: 1739 for roll width up to: 800 mm Mounting height: 1,368 mm Working speed: 480 pcs/h Power connection: 220 V, 0.18 kW Operating mode: fully automatic Weight: 370 kg Link PAL-Cut 800 More items - new and used - can be found in our shop! International shipping costs on request!

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Capacity , ton: 800 Stroke, mm: 320 Strokes/min: 20 Shut height, mm: 900 Bed to ram adjustment stroke, mm: 320 Bed dimensions, mm: 2500x1600 Main drive motor power, kW: 75 Overall dimensions, mm: 4220x3500x8356 Weight, ton: 96,6

Key data: 300 , 4

Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered

Qty. 1 Second-hand lathe CNC machine Manufacturer: VERNET BEHRINGER Machine type: FG 2005 CNC Definition: Sheet metal drilling line Year of construction: 2012 Voltage supply: 380 V, 3 ph., 50 Hz, Ground Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar Oil volume: ≈120 liters Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm & 1340 x 1000 x 60 mm

Hydraulic mobile tin hole punch for e.g. control cabinet construction and control construction Manufacturer Alfra Type SKP-1 Punches holes of max 140mm diameter in 3mm sheet metal Round, square and rectangular stamps possible. Punch punch punch tin punch drill tin hole drill monocut gap-plate-hole, hand hydraulics, ball bearing screw, Klauke Alfra Special price

NC - controlled mechanical sheet metal panel scissors in backdrop cutting design, maximum cutting length 1,050 mm, maximum cutting capacity 4 mm steel sheet/ST40, cutting angle 1.5°, NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections lower than 1,000 mm - optionally available with a foldable sheet support at the rear stop or a conveyor belt with upliftrs, drive power 5 kW, weight approx. 2,500 kg

with 5 pairs of splitting knives (manually adjustable), with manual 5 roller straightening mechanism, with motorized guillotine shears for the cross-section, with PLC touch control and foot switch. Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Sheet thickness steel: 1.25 mm Working width: 1250 mm Farbe/Colour grün/lichtgrau Total power requirement: 3.1 kW Machine weight: 1500 kg Straightening rollers: 5 pieces Number of blades: 5 pairs Operator side seen from the inlet side on the left Machine Number: 73350-10

Used Pipe Production Line Brand: Bazhou Wanxin Industrial and Trading Year of manufacture: 2021 Pipe Production Line Consists of: Dual-Station Decoiler Function: Passively unwinds the coil. Construction: Dual-station design with 180° rotation; manual expansion. Advantages: Fast loading, simple and convenient operation. Hydraulic Shear and Butt-Welding Machine Function: Cuts the front and rear ends of the strip, centers the strip, and welds it back together. Construction: Manual hydraulic shear with boom, front and rear pressure rollers, front and rear centering rollers, welding device. Cutting Method: Hydraulic shear Pressing Method: Double-cylinder press Welding Method: Manual welding Coil Accumulator Function: To ensure continuous production of the welded pipe, a storage unit is installed after the shear and butt-welding platform. It continuously feeds the strip while the mat ...

sheet width: 1000 mm plate thickness: 5,0 mm distance between columns: 1070 mm diameter of upper rolls: 130 mm total power requirement: 4,0 KW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 2,55 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg

sheet width: 3554 mm plate thickness: 42 mm pre-bending: 36 mm Control: total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: 7.3x2.4x2.5 m Stocknumber 2210024 Type of machine 4-roll CNC Plate bending machine Make FACCIN Type 4HEL 3554 Build in 2000 Type of control CNC Additional information Cap. 3554 x 42 mm prebending 36 mm Toprolldiam. 540 mm underrolldiam. 530 mm siterolldiam. 430 mm 55 Kw LxWxH= 7350 x 2400 x 2500 mm weight of the machine 49 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

sheet width: 3050 mm plate thickness: 53 mm pre-bending: 45 total power requirement: 60 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210020 Type of machine 4-Roll Plate Bending machine Make DAVI Type MCB 3053 Build in 1998 Type of control Conventional Additional information max. Plate widht 3050 mm Max. plate thickness 53 mm Max. thickness prebending 45 mm Toprol diameter 525 mm under roll diam. 470 mm Site rolls diam. 400 mm Power 78 Hp Hardened rolls Conical bending Dimensions: 6000 x 3100 x 6700 mm in very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons

sheet width: 300 mm plate thickness: 2,5 mm distance between columns: 300 mm diameter of upper rolls: 32 mm total power requirement: Handbetrieben weight of the machine ca.: 15 Kg dimensions of the machine ca.: 500 x 300 x 150 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal clamp: clamping range up to 85 mm -Load capacity: kg -Dimensions: 300/80 / H330 mm -Weight: 13 kg

Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal claw: clamping range up to 30 mm -Load capacity: kg -Dimensions: 250/100 / H460 mm -Weight: 20 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal claw: clamping range up to 35 mm -Load capacity: 4 t -Dimensions: 230/110 / H450 mm -Weight: 22 kg

Plate shears Cutting capacity 1 mm Cutting width 1.10 m Foot operation, the cross step is missing.

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -with chain: 1.3 m -Span width: 44 to 70 mm -Load capacity: 6300 kg -Dimensions: 300/460/H120 mm -Weight: 30 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 40 mm -Load capacity: 9000 kg -Number: 1x terminal available -Weight: 28 kg

sheet width: 1570 mm plate thickness: 10 mm pre-bending: 8 total power requirement: 7 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,5 x 1,5 x 1,55 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 50 mm -Load capacity: 9000 kg -Weight: 32 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 50 mm -Load capacity: 6000 kg -Number: 1x terminal available -Price: per piece -Weight: 28 kg/piece

Key data: 2000 mm, 10 mm

Sheet metal straightener, partially overhauled       sheet leveller, partly overhauled   Typ/ type:                                � �                                  � �              UBR 10 x 2000 /1-16 WDKS Manufacturer / make: WMW Gotha Year of construction/ year: 1989/2024 electrically overhauled max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Straightening roller diameter/diameter of     Straihgtening rollers: 145 mm Speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Distance between b/n rollers centres: 150 mm Diameter of bottom rollers: 290 mm Number of bottom rollers / number of bottom rollers 21/24 Number of outr ...