eht sheet metal working used for sale

Inv. Num. : 8740 Type: VR 13-31 Producer: EHT Generated: Parameters: Maximum cutting length: 3100 mm Maximum cutting thickness: 13 mm

An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible.

Force of pressure: 150 t working width: 4500 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: 1000 mm Electr. Supply: 380 V, 18.5 kW weight: 14.8 t space: 4200 x 2000 x 3000/3150 mm

Technical data: -maximum working length 1250 mm -Stand round 1050 mm -Max pressing force 80 t -Stroke 250 mm -Stand RADIUS 300 mm -Max height betw. Table - press bar 560 mm -Lifting speeds -Backward speed idle max 100 mm / sec. -Forward speed 100 mm / sec. -Backward press speed max. 12 mm / sec. -Total power 15 kW -Space requirement approx. B 1750 x H 3400 X 2000 mm -Weight approx. 8500 kg -with: - CNC - control CYBELEC DNC 7400 PSGY -controlled X - axis back gauge 5-1000 mm -Pneum. Z - axis in three stages. height-adjustable -manually movable and foldable stop fingers -controlled pneumatic die shift - hydr. Tool clamping -Manual crowning - 2 piece support arms -Pointed tool shared H 320 x L 1000 mm -Foot tool H 320 mm x L 1000 mm - universal matrix L 1000 mm

Force of pressure: 250 t working width: 3550 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: Yes Electr. Supply: 400 V, approx. 26 kW weight: 20 t space: 2100 x 3800 x 3100 mm

Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm -Weight: 147 kg

pressure: 1500 kN chamfer lenght: 3550 mm distance between columns: 3044 mm Control: Cybelec 34 PS-CN column arm: 350 mm max. ram stroke: 220 mm dimensions of the machine ca.: 3200 x 4200 x 2100 m sheet support: hinten / back number of support arms: 2, verschiebbar / adjust. die shift: hydraulical tool clamping: upper tool quick change system: crown: 3 sets of tools included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Max. working length 4050 mm - Column passage 3050 mm - Max. pressing force 110 t - Plunger stroke 200 mm - Projection 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t -with: - Control CYBELEC ModEva 10 S renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: -Mot. Back gauge 5 - 1000 mm - Front support arms - Split sharpening tool, - Universal die

Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears -Sheet shear: hydraulic -Cutting width: 2000 mm -Max. cutting thickness: steel 6 mm -Features: Back gauge, cutting gap adjustment -Space requirement: 3280/2700/H2060 mm -Transport dimensions: 2280/2700/H2060 mm -Weight: 5980 kg

CNC Punching Press Manufacturer: EHT Type: Strippit 1500/30 Year of Make: 2000 CNC Control: Fanuc Working area without replacement: 2500 x 1500 mm Material thickness max.: 8 mm Punching force: 30 tons. Turret with 46 tool positions, including 4 index stations size D 3 programmable claws Metal table Used exclusively in single-shift operation incl. tools WILSON TOOL

Key data: 6000 mm, 4 mm

With autom. Stacking and transport table, light barrier, cutting counter, with scrap diverter, compressed air required Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 6000 mm Sheet thickness steel: l 4.0 mm Sheet thickness aluminium: 6.0 mm Sheet thickness front: 2.0 mm Colour: grey Total power requirement: 11 kw/63 A Machine weight: 19,500 kg Dimensions: 6800 x 3500 x 2300 mm without cutting gap adjustment Hydraulic hold-down device Brpmi77K7Oq Column projection: 200 mm Cutting angle adjustment fixed: 1 degree Back gauge: 10 - 1000 mm Machine number: 107640

pressure: 150 t chamfer lenght: 3550 mm distance between columns: 3050 mm Control: Cybelec DNC 880S stroke: 700 mm throat: 350 mm dimensions: 4400x2200x3940 mm weight of the machine ca.: 15.000 kg Accessories/equipment: - Bending aid in front of the machine - Parking space for bending aid - 3 stop fingers - Control conversion 2011 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic CNC press brake EHT for sale. Press force: 1100kN, bending length: 3050mm, min./max. table-ram distance: 280mm/600mm, rapid approach speed: 100mm/s, working speed: 2mm/s-8mm/s, return speed: 100mm/s, backgauge adjustment range: 5-1000mm, backgauge adjustment speed: 200mm/s, backgauge vertical adjustment: +/-10mm, safety distance between tooling and operating elements: 120mm, stopping time: 75ms, stopping distance: 11mm, Control system: DAK 90. Machine weight: 8500kg. Documentation available. Inspection by appointment possible.

sheet width: 6000 mm plate thickness: 6 mm distance between columns: 610 mm Control: Elgo 87 P2 total power requirement: 15 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width:3050 mm plate thickness:4 mm total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:3900 x H 1850 x T 2100 mm

sheet width: 3000 mm plate thickness: 4 mm distance between columns: 3050 mm total power requirement: 8 kW weight of the machine ca.: 4.8 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3050 mm, 6 mm

3000 x 6mm Elgo P50 Rear sheet supports

sheet width: 3200 mm plate thickness: 4.0 mm ST distance between columns: 3300 mm upper clamping bar adjustment: 400 mm Adjustment folding beam: 80.0 mm pivoting angle: 180 Grad clamping capacity max.: 200 KN rear stop: 10.0 - 1600 mm oil volume: 160 Liter total power requirement: 9.8 kW weight: 8500 kg range L-W-H: ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC DNC 80 PP Swiveling control panel, front right 2D graphic display for display and multiple simulation 2D graphic programming Easy handling - CNC electro-motorized backgauge Travel range 10.0 - 1,600 mm Pneumatic / lowerable stop fingers Adjustment speed max. 250 mm/sec. Rear sheet support table with brushes - Electro-motorized l ...

pressure: 85.0 t chamfer lenght: 2050 mm distance between columns: 1650 mm column arm: 400 mm stroke: 240 mm dayligth: 320 - 560 mm ajustment speed: 150 mm/sec working feed: 15.0 mm/sec return speed: 150 mm/sec back stop - adjustable: 5.0 - 1000 mm table width: 110 mm work height max.: 1050 mm operating pressure: max. 297 bar compressed air: 4.5 - 6.0 bar oil volume: 200 l operating pressure: 340 bar total power requirement: 7.5 kW weight of the machine ca.: 5900 kg range L-W-H: 4100 x 2100 x 2750 mm with increased installation height / piston stroke well-maintained condition () - in checked condition - machine video - https://www.youtube.com/watch?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - including CYBELEC CNC control swiveling control panel at the front right external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motor ...

pressure: 225 t chamfer lenght: 3050 mm distance between columns: 2550 mm column arm: 300 mm ajustment speed: 110 mm/sec work speed: 9.0 mm/sec return speed: 130 mm/sec work stroke: 240 mm dayligth: 320 - 560 mm table height: 1000 mm table width: 200 mm oil volume: 350 ltr. operating pressure: max. 296 bar air pressure: 4.5 - 6.0 bar voltage: 400 Volt total power requirement: 18.5 kW weight: 14900 kg range L-W-H: 5180 x 2400 x 3100 mm - in checked condition - machine video - https://www.youtube.com/watch?v=ebbbzSYMxKw Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control ModEva 12S, swiveling at the front right High-resolution graphic color screen 14 inches Representation as a line, area or volume drawing of the product Clear, concise menus in the operators language Large tools and products library - CNC-controlled back gauge adjustment (X-axis) Stop rang ...

pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3550 mm Control: CYBELEC ModEva Pac throat: 350 mm distance between table / ram: 430 mm table width: 250 mm stroke: 250 mm total power requirement: 18,5 kW weight of the machine ca.: 16500 kg dimensions of the machine ca.: 4400x2100x3200 mm Equipment/accessories: - Control conversion at the end of 2018 - Electric backgauge 1250 mm - 10-stage die displacement - crowning - EHT 26 mm tool holder - Axes controlled: Y1,Y2,X,R - Sheet metal holding table - 4x manually adjustable stop fingers - pneum. Upper tool clamping - Safety light curtain - 3x height-adjustable support arms - Oil cooler - 2-hand foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 4.0 mm thickness at Niro-steel: 2.5 mm cutting angle adjustment: 1.0 ° back stop - adjustable: 10 - 1000 mm adjustment speed: 180 mm/s down holder: 21 Stück strokes per minute: 18 - 31 oil volume: 160 L Control: ELGO P8511 column arm: 200 mm distance between columns: 3050 mm 0: max. 300 bar voltage: 400 V main drive: 9.0 kW weight of the machine ca.: 4800 kg. dimensions of the machine ca.: 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear swing cut - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left for positioning the electro-motoric rear stop target/actual position value input possible adjustment by three-phase motor via toothed belt - support table with ball rollers there are recessed grips between the table plates - front finger guar ...

pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2550 mm dayligth: 320 - 560 mm stroke: 240 mm working feed: 10.0 mm/sec return speed: 150 mm/sec column arm: 400 mm work height max.: 1050 mm control: DNC 1200 PS/B operating pressure: max. 297 bar compressed air: 4.5 - 6.0 bar connected load: 15.0 kW oil volume: 250 ltr. weight: 11500 kg range L-W-H: 5240 x 2400 x 2900 mm good/well-Maintained conditions used in Aluminum processing - in checked conditions - machine Video - https://www.youtube.com/watch?v=z-Bxibk_8uE Features: - CNC Electro-Hydraulic Press Brake - CYBELEC CNC Control Model DNC 1200 PS/B Swiveling Control Panel, Front Right Numerical Programming Tool & Program Library - CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning - CNC Electro-Motorized Backgauge (X-Axis) with 3x Manually Adjustable Backgauge Fingers (Z-Axis) Maximum Travel Speed: 250 mm/sec - ...

pressure: 225 t chamfer lenght: 2050 mm distance between columns: 1550 mm control: CYBELEC DNC 1200 PS Eco stroke: 550 mm table height: 700 mm throat: 405 mm distance between table / ram: 320-870 mm column arm: 405 mm weight of the machine ca.: 14.000 kg Accessories / equipment: - controlled axes: Y1 - Y2 - X - R - Z1 and Z2 can be moved manually - Lasersafe angle measurement - Pneumatically adjustable support table - pneumatic upper and lower tool clamping - 2-hand foot control - manual crowning The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 16 mm cutting length: 4075 mm weight: 23 t output: 45 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 3050 mm column arm: 300 mm stroke of ram: 240 mm quantity of oil: 200 l control: CYBELEC Cybtouch 15 range L-W-H: 4500x2200x3000 mm Equipment/accessories: - manual crowning - 3 x manual stop fingers - die displacement - pneum. upper tool clamping - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EHT VarioPress 175-35 CNC press brake was built in 2004 in Germany by EHT Werkzeugmaschinen GmbH (now TRUMPF). The machine is designed for precision machining of workpieces with a maximum length of 3550 mm. The machining process is performed with a high press force of 175 tonnes, which, combined with an extremely stable design, guarantees excellent bending results, even during the most intensive challenges. All this is complemented by the advanced CYBELEC control system, which significantly facilitates the daily operation of the machine. The EHT VarioPress press brake weighs 14900 kg. Technical specifications of the EHT VarioPress 175-35 press brake - CNC controller: CYBELEC DNC 1200PS Eco/Col - maximum press force: 175 t - maximum sheet metal length: 3550 mm - front supports - connection power: 20.5 kW - current protection: 63 A - control voltage: 24 V - power supply: 3x 400  ...

pressure: 135 t chamfer lenght: 2550 mm distance between columns: 2050 mm control: CYBELEC ModEva 10 S total power requirement: 25 kW weight of the machine ca.: 11.000 kg dimensions of the machine ca.: m Machine: - Sturdy machine frame constructed as a fully welded all-steel structure - Pressure beam with high bending strength - Electrohydraulic top drive via proportional valves - Modern block hydraulic system Optional equipment: - Increase in installation height and stroke by 150 mm each - Backgauge system 2 - 2 axes, R-axis adjustment 150 mm - 2 x additional stop fingers 2/4-axes, however, offset by 20 mm - CNC holding device - Distance from the bending line to the holding device approx. 240 mm - EHT quick-clamping device for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering - EHT lower tool clamping, mounting width 55 mm, pneumatic - Hardened insert strip for E ...

pressure: 50 t chamfer lenght: 1550 mm distance between columns: 1150 mm Control: CYBELEC DNC 1200 PS Eco column arm: 405 mm table height: 900 mm stroke of ram: 400 mm distance between table / ram: 720 mm total power requirement: 9,5 kW weight of the machine ca.: 5.200 kg dimensions of the machine ca.: 2000x1900x2920 mm Accessories/Equipment: - CYBELEC DNC 1200 PS Eco controller - 2 support arms - 4 stop fingers - Lasersafe - Foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 170 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke: 400 mm weight of the machine ca.: 15.300 kg dimensions of the machine ca.: m Machine: - Sturdy machine frame - Press beam - Spherical bearing for the press beam with press beam tilt - Electro-hydraulic top drive - Block hydraulic system - Length measuring system (Y-axis) with dynamic spring compensation - Control cabinet air conditioning unit - Adapter strip for tool mounting - 2 stop fingers Optional equipment: - 2-axis backgauge (XM/XS, R) - 1 sheet metal holding device 200 daN CNC - 2 x additional stop fingers 2/4-axis - 1 x pneumatic upper tool clamping 26 mm - 1 x pneumatic lower tool clamping 55 mm - 1 x lower tool shift EHT pneumatic - 1 x CNC crowning device 3000 kN/m - 1 x Operator Safety Guard PILZ PSENvip Productive - 2 x Bending aid 1500 N - 1 x Support strips for bending aid - 1 x Parking posit ...

sheet width: 3050 mm plate thickness: 10.0 mm thickness at Niro-steel: 6.0 - 8.0 mm down holder: 13 Stück distance between columns: 3070 mm cutting angle: 1.0 - 4.0 ° no. of strokes: ~ 22 Hub/min Control: ELGO P8511 oil volume: 240 l voltage: 400 V total power requirement: 15.0 kW weight: 8000 kg range L-W-H: 3550 x 2350 x 1900 mm good condition () from a maintenance workshop Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit P8511 - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment Front analog cutting angle display - 1x stable side fence, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front - 1x freely movable foot switch - 2x fro ...

sheet width: 4050 mm plate thickness: 8 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t chamfer lenght: 2550 mm Control: Cybelec DNC 70 weight: 9000 kg dimensions: 3000 x 2100 x 3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 225 t chamfer lenght: 4050 mm distance between columns: 3550 mm control: CYBELEC DNC 86 PS total power requirement: 18,5 kW weight of the machine ca.: 18.000 kg dimensions of the machine ca.: 5180x2400x3200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis EHT EHPS 20-35 press brake was manufactured in 1995. It features a pressing force of 2,000 kN and a bending length of 3,550 mm, providing robust capabilities for metal forming. The machine includes a distance between columns of 3,050 mm and a throat depth of 350 mm. If you are looking to get high-quality bending capabilities, consider the EHT EHPS 20-35 press brake we have for sale. Contact us for further details.

pressure: 225 t pressing length: 3050 mm distance between columns: 2550 mm : Cybelec Visitouch stroke of ram: 700 mm column arm: 405 mm distance between table / ram: min. 320 / max. 1020 mm total power requirement: 29,5 kW weight of the machine ca.: 15.500 kg Accessories/equipment: Rear stop Stop support adjustment: - Stop range X-axis (from bending line): 5-1000 mm - Adjustment speed X-axis: max. 500 mm/sec Height adjustment - Adjustment range R-axis (from table surface): 85-235 mm - Adjustment speed R-axis: max. 150 mm/sec Stop finger adjustment: - Adjustment range Z1-axis (from left table front): 520-2365 mm - Adjustment speed Z1-axis: max. 1000 mm/sec - Adjustment range Z2-axis (from left table front): 690-2535 mm - Adjustment speed Z2-axis: max. 1000 mm/sec - Adjustment range X1-axis (from center position): ± 125 mm - Adjustment speed X1 axis: max. 250 mm/sec Die displacement - adj ...

pressure: 135 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke: 400 mm quantity of oil: 300 l Control: Cybelec Visitouch total power requirement: 15 kW weight of the machine ca.: 10.700 Kg range L-W-H: 4200x2200x3200 mm Equipment: - Controlled axes: Y1, Y2, X, R, - SICK” light barrier in front of the machine - Side safety guards - Protective grille behind the machine - foot switch - incl. tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 10 mm : 11 kW range L-W-H: 4000 x 2220 x 1830 mm weight: 6.300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 10 mm control: Elgo 87 P2 : 11 - 31 Hub/min cutting angle adjustment: 1 - 4 ° Number of hold downs: 16 Stück : 900 kg : 11 kW table width: 700 mm table height: 800 mm range L-W-H: 4000 x 2220 x 1830 mm weight: 6300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: ZR – 23M – 31”, reversing Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers

Qty. 1 Second-hand aluminium strip production plant Entry Material: Aluminium Scrap – HD666, AA5050, 2.5-3.0% Mg Final product: Aluminium strip (can stock) Width: 220 mm Thickness: 0.15 – 1.0 mm Mfc.: De Winter, Thermcon, Fata Hunter, Fröhling, Nederman, Burghardt & Schmidt, Siemens Built: 1984, 1999, 2000, 2002, 2014, 2015 Scope of supply: Melting Furnace Tilting Casting Furnace Block Caster 5 Stand Hot Rolling Mill 6 Stand Cold Rolling Mill Hot Gas Filter Slitter Welding Machine Treatment Furnace Quenching Unit Shear

Qty. 1 Second-hand strip rolling mill Mfc.: United Engineering Type: 4-Hi Built: Strip Width: 393 mm (15.5”) Thickness Entry: 4 mm (0.16”) Exit: 1.2 mm (0.05”) Mill Speed: 405 m/min. (1330 Fpm) Strip Tension: 2670 kg (5875 Lbs) Coil ID 406 mm (16”) Coil OD 1448 mm (57”) Coil weight: 3180 kg (7000 lbs)

material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

guillotine shears AG TS 2 Working thickness 2mm Adjustable stop Hold Length 1.80 m Width 1 m Height 1.40 m Weight 300 kg

Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

LASER PRIMA INDUSTRIE Mod. 2D/3D DOMINO Year 2006 1500x3000 2.5 kw 22,000 working hours Visible in operation No loading and unloading

Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

55 ton multi station

Inv. Num. : 8739 Type: TS 3006 Producer: HACO Created: 2004 Parameters: Maximum cutting length: 3000 mm Maximum cutting thickness: 6 mm

Manufacturer: SATO Model: DHDS 3100 Year of Manufacture: 2017 Estimated operating hours: 16,000 hours - Plasma cutting system with table and extraction system. - Cutting area: 2 x 6 meters. - Equipped with plasma unit and 2 oxy-fuel torches. Find more here - / Contact us at -

Manufacturer: Amada Model: LST 3015-M2 Year of Manufacture: 2011 Power Required: 4 kVA Noise Level: 70 dB(A) Weight: 1950 kg Operating Hours: 30,000 hours Pallet Capacity: - Maximum sheet size: 3050 x 1525 x 25 mm - Maximum load: 920 kg Amada 4 kW laser cutting system including shuttle table and extraction system. Operated in single-shift production, no maintenance backlog. Find more here - / Contact us at -

00905 Designation of the scissors system Manufacturer: Finnpower Model SG6 12.13 Year of construction 2008 Operating hours: (as of Feb 2026) 42,340 h Power on time 6462131min Running time 2540410min Alarm time 2187771min Control Finnpower ICP1 Machine weight 28,000 kg Punching force 300 kN Cutting force 250 kN Max. operating pressure 300 bar Note: Tapping unit without function The SG6 turbine is currently connected to an LP6 Finnpower plant. The SG6 is converted into a stand-alone machine. So that the SG6 can also work independently on its own. The SG6 scissors are also currently connected to a Night Train storage system together with the LP6. (the LP6 layout and Night Train storage system will be dismantled on March 30, 2026) SG6 12 13 3 x 400 V 50 Hz 3 x 80 A Lcu 25 kA Condition Good condition Dismantling March 30, 2026

older Gebr. Lever shears on base frame Technical data Knife length 500 mm Cutting range approx. 3-4 mm Dimensions 800 x 170 x 1300 mm dto. incl. base frame 1300 x 600 x 1780 mm Remarks / Accessories: Underframe, small damage to the knife Maschinenladen Oeben GmbH Krahnendonk 116 D-41066 Mönchengladbach Phone: + 49 2161 662701 maschinenladen.de InfoMachine Shop

Manufacturer: Durma Model: MS 2003 Type: Guillotine shear Year of Manufacture: 2014 Find more here - / Contact us at -

Manufacturer: Prinzing Model / Type: FME 4-600 Type of machine: Flanging machine Year of manufacture: 2012 Thickness: 4.0 mm Length: 65 mm Weight: 3650 kg Voltage: 400 V Power: 12 kW Current: 8.5 A Certification: CE Condition: Only has training hours on it Find more here - / Contact us at -

Auction-ID: A1-47350-12

Manufacturer: Amada Year of manufacture: 1999 Model: GS 630 Type of machine: Hydraulic Shear Cutting force: 197 KN Power: 5.5/7.5 KW/HP Stroke: 160 mm Voltage: 400/415 Volts Amperage: 16 A Frequency: 50 Hz Find more here - / Contact us at -

Prepared for CNC control Siemens 840 DSL Precision turntable make EIMELDINGEN with aerostatic axial bearings Specifications Table diameter 5,600 mm Total height approx. 1,230 mm Centering bore Ø 250H7X 25 mm Permissible transport load 30,000 kg Holding torque of the table clamping 2,400 daNm Table speed 0.002 – 2 min Net weight approx. 30,000 kg Operating voltage 380 V, 50 Hz. 3 phases Control voltage 24V Positioning accuracy (without control errors) ± 1" Plan accuracy 0.02 mm Axial running accuracy 0.01 mm Concentricity deviation of the centering bore 0.01 mm Resolution of the displacement measuring systems 0.0001°

Angular table for lid milling machine Clamping flat 900x530mm 8 St T-hooks Never used

In 2020, the machine was extensively overhauled for 7000 €. Proof available. Processes: - Chamfering 60° - Longitudinal turning up to a maximum of 40 mm - Centering drilling Workflow fully automatic: - Tensioning, feeding to - Rapid traverse forward - Work feed - Dwell time for cutting - Rapid traverse back - Relax, feed on Specifications: workpiece diameter approx. 80 mm workpiece diameter 6kt-SW 70 mm min. workpiece diameter round and 6kt 10 mm min. workpiece length 450 mm Speed range infinitely variable Level I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1.3/1.8 Engine power Coolant motor kW 0.07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

Work platform, platform TALL ESCOPE No. 512 Load capacity: 115 kg Platform height: 2900 - 4400 mm Dimensions: 3600 x 1000 x 2000 mm Weight: 92 kg used, tested !

: für Draht hydraulically tiltable: ja : 2 t Year: unbekannt : Hydraulik Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine is in good technical condition, a visit and a test run are possible by prior arrangement.

Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feeder Plain text display Compression Force Monitoring Wire straightener Bosch Stripping Devices Bracket and brush motor with mounted tool W32/1-32 Soundproof booth Fäßerb CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as shown in the pictures. Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

- Hersteller: HURCO - Model/Typ.: BMC4020HT/M - Baujahr: 1997 - MFG.No.: 029 Verfahrwege: - X-Achse: ~ 1020 mm - Y-Achse: ~ 510 mm - Z-Achse: ~ 610 mm - Steuerung: Ultimax 3 Hauptspindel: - Hauptspindel: max. Drehzahl 8.000 U/min - Hauptspindel Leistung: 15 kW - Werkzeugaufnahme: SK 40 Arbeitstisch: - Tischaufmaße 1220 x 510 mm - max. Tischbelastung ca. 700 kg - Werkzeugwechsler: - Anzahl der Werkzeugplätze 24 Stück - max. Werkzeugdurchmesser 100mm - max. Werkzeuglänge 300mm - max. Werkstückhöhe 250mm (bei einer Werkzeuglänge von 300mm) - max. Werkzeuggewicht 7,0 kg - Maschinengewicht ca. 5,6 to - Standort: demontiert, am Lager D-32825 Blomberg

Fully automatic sheet dispenser PAL-Cut 800 The Palcut 800 cuts paper quickly and precisely into intermediate sheets of the desired length, directly from the roll. Fully automatic sheeter PAL-Cut 800 sheet dispenser, which cuts intermediate layers quickly and precisely in the desired length. The sheet dispenser is suitable for continuous operation in an automatic palletizing system and for companies with high sheet consumption. The Palcut 800 works with rollers of max. 800 mm width. Type designation: PAL-Cut 800 Length: 1853 mm Width: 1380 Height: 1739 for roll width up to: 800 mm Mounting height: 1,368 mm Working speed: 480 pcs/h Power connection: 220 V, 0.18 kW Operating mode: fully automatic Weight: 370 kg Link PAL-Cut 800 More items - new and used - can be found in our shop! International shipping costs on request!

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Key data: 300 , 4

Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered

Qty. 1 Second-hand lathe CNC machine Manufacturer: VERNET BEHRINGER Machine type: FG 2005 CNC Definition: Sheet metal drilling line Year of construction: 2012 Voltage supply: 380 V, 3 ph., 50 Hz, Ground Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar Oil volume: ≈120 liters Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm & 1340 x 1000 x 60 mm

Capacity , ton: 800 Stroke, mm: 320 Strokes/min: 20 Shut height, mm: 900 Bed to ram adjustment stroke, mm: 320 Bed dimensions, mm: 2500x1600 Main drive motor power, kW: 75 Overall dimensions, mm: 4220x3500x8356 Weight, ton: 96,6

with 5 pairs of splitting knives (manually adjustable), with manual 5 roller straightening mechanism, with motorized guillotine shears for the cross-section, with PLC touch control and foot switch. Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Sheet thickness steel: 1.25 mm Working width: 1250 mm Farbe/Colour grün/lichtgrau Total power requirement: 3.1 kW Machine weight: 1500 kg Straightening rollers: 5 pieces Number of blades: 5 pairs Operator side seen from the inlet side on the left Machine Number: 73350-10

Hydraulic mobile tin hole punch for e.g. control cabinet construction and control construction Manufacturer Alfra Type SKP-1 Punches holes of max 140mm diameter in 3mm sheet metal Round, square and rectangular stamps possible. Punch punch punch tin punch drill tin hole drill monocut gap-plate-hole, hand hydraulics, ball bearing screw, Klauke Alfra Special price

NC - controlled mechanical sheet metal panel scissors in backdrop cutting design, maximum cutting length 1,050 mm, maximum cutting capacity 4 mm steel sheet/ST40, cutting angle 1.5°, NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections lower than 1,000 mm - optionally available with a foldable sheet support at the rear stop or a conveyor belt with upliftrs, drive power 5 kW, weight approx. 2,500 kg

With the Rau sheet metal edging pliers system, standing seams on double-seam roofs can be easily edged up. The standing seam is bent first by 45 degrees and then 90 degrees by 2 bends. By means of an eccentric and large lever transmission, the pliers press the sheet metal together and this force is automatically maintained during bending. To achieve a sharp upstand, press the pliers with your foot or one hand. The BKZ enables energy-saving work. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working width: 500 mm Weight: t 7 kg Colour: blue/yellow Dimensions: 500 x 60 x 620 mm Machine number: 1214

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Used Pipe Production Line Brand: Bazhou Wanxin Industrial and Trading Year of manufacture: 2021 Pipe Production Line Consists of: Dual-Station Decoiler Function: Passively unwinds the coil. Construction: Dual-station design with 180° rotation; manual expansion. Advantages: Fast loading, simple and convenient operation. Hydraulic Shear and Butt-Welding Machine Function: Cuts the front and rear ends of the strip, centers the strip, and welds it back together. Construction: Manual hydraulic shear with boom, front and rear pressure rollers, front and rear centering rollers, welding device. Cutting Method: Hydraulic shear Pressing Method: Double-cylinder press Welding Method: Manual welding Coil Accumulator Function: To ensure continuous production of the welded pipe, a storage unit is installed after the shear and butt-welding platform. It continuously feeds the strip while the mat ...

sheet width: 1050 mm plate thickness: 1 mm roll diameter: 56 mm dimensions of the machine ca.: 1600 x 700 x 1050 mm Domestic equipments: - Upper roller can be swung out manually The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mm plate thickness: 13 mm pre-bending: 10 mm upper roll diameter: 230 mm lower roll diameter: 210 mm side roll diameter: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 4.620 kg dimensions of the machine ca.: 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

sheet width: 4100 mm plate thickness: 35 mm pre-bending: 28 mm upper roll diameter: 540 mm lower roll diameter: 541 mm side roll diameter: 440 mm total power requirement: 37 kW weight of the machine ca.: 48.100 kg Machine dimensions approx.: 7670x3000x2930 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 3,3 mm pre-bending: 3,0 mm roll diameter: 90 mm min. dia.: 130 mm total power requirement: 1,1 kw weight of the machine ca.: 570 kg dimensions of the machine ca.: 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mm plate thickness: 8 mm pre-bending: 6 mm upper roll diameter: 190 mm lower roll diameter: 170 mm side roll diameter: 150 mm total power requirement: 3 kW weight of the machine ca.: 3.450 kg Machine dimensions approx.: 4040x1380x1255 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VERRINA CLR 216 X 4050 Sheet metal round bending machine Double roller with 4 rollers and double pressure Year of manufacture 1979 Capacity 4000 mm x 16 mm Roll length 4050 Roll diameter side rolls 370mm top & bottom roll 410mm Roll rise and fall 370mm Input 400/3/50 Hz 52 kW Rolling speed 2.9 / 3.9 / 6.8 meters per minute Control control panel Equipped with hydraulic drop, safety cable hoist Length 9000mm Width 2350 mm Height 2400 mm Net weight approx. approx. 29,500 kg

sheet width: 3100 mm plate thickness: 25 mm pre-bending: 20 mm upper roll diameter: 390 mm lower roll diameter: 360 mm side roll diameter: 300 mm total power requirement: 18,5 kW weight of the machine ca.: 17.100 kg Machine dimensions approx.: 5800x2100x2000 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...