carl zeiss imt accessories for machine tools used for sale

Zeiss CNC Coordinate Measuring Machine Prismo MP5 Year of manufacture: 8/1999 Last calibration 9/2023 Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm Device features, equipment: Control C98 with control panel Sensors RDS with RST Pushbutton Changer Magazine 5-fold RST 5x probing system Dpp7Jl Pushbutton Accessories Measuring ball Calculator with monitor Software Calypso Basic 5.4 Loading system Other accessories Complete retrofit C99 and Calypso possible

Maximum turnerable diameter 1200 mm Maximum permissible diameter 1250 mm Spindle engine power (S1/S6) 55 / 66 Kw Spindle maximum laps 1200 rpm ASA 15" Spindle Attachment Fast speeds 12 m/min X-axis stroke 750 mm Z-axis stroke 750 mm Rated engine torque 20 (X)-20 (Z) Nm Peak engine torque 80(X)-80(Z) Nm Nominal thrust force 1200(X) -120 (Z) N Screw pitch 10 (X) -10 (Z) mm Tools 24 Crown HIRT tool attachment Maximum weight per cell 15 kg Tool change cycle time 10 seconds Maximum weight on tool change ~ 250 Average tool weight ~ 10 Maximum milling tool diameter 150 mm Maximum tool length 350 mm Siemens Sinumerik Control

The machine is in good technical condition, testing is possible by prior arrangement.

Ref. -No.: 10157 Manufacturer: CARL ZEISS Year of construction: 1997 Type of control: HP 9000 Serie 700 Control: Betriebsystem HP-UX.9.05 Storage location: Halberstadt Country of origin: Deutschland Turntable: 1000x2100 mm Machine weight: 4.800 kg Machine Height: 3050 mm Table height above the floor: 850 mm X-Axis: 850 mm Y-Axis: 1800 mm Z-Axis: 600 mm Further information: Three coordinate measuring machine Microcomputer control X-axis as a longitudinally movable portal Y-axis cross slide in the portal Z-axis as measuring head quill (vertical) Passage between the portal approx. 1,000 / 1080 mm Passage in height approx. 750 mm

total power requirement:380V, 50Hz, 7,9A kW weight of the machine ca.:1 t dimensions of the machine ca.:4 x 3 m

An old precision cylindrical grinding machine Carl Zeiss is available. Includes numerous accessories and tools. An on-site inspection is possible.

Manufacturer: Carl Zeiss Model: OVS 250 Machine type: Automatic glass grinding machine Current type: D Frequency: 50 Hz Operating voltage: 380 V Rated current: 7.6 A Control voltage with/without transformer: 220 V / 24 V Rated fuse current in the supply line, without/with increased delay: 20 A Wiring diagram number: 85 24 31 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Carl Zeiss Model: HKM063 Machine type: cylindrical grinding machine Technical Specifications: - Frequency: 50 Hz - Operating voltage: 380 V - Rated current: approximately 10.1 A - Control voltage with/without transformer: 220 V / 24 V - Rated fuse current in the supply line, without/with increased delay: 16 A Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 9200 mm y-travel: 1600 mm z-travel: 2400 mm dia. of test piece: mm working area: mm dist. between centers: mm control: ZEISS C 99 total power requirement: kW weight of the machine ca.: 30 t dimensions of the machine ca.: 10 x 3,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ZEISS MC 850 X-AXIS STROKE: 850 MM Y-AXIS STROKE: 1200 MM Z-AXIS STROKE: 600 MM WEIGHT APPROSS. 3800 KG DIMENSIONS (W X H X D): 1.6 X 1.56 X 2.95 MM

RACING X/Y/Z AXES 900/900/700 MM MEASURING PRECISION 2.2 + L/300 ?M WORKPIECE WEIGHT (MAX.) 1,200 KG CONTROL SYSTEM VAST MEASURING HEAD POINT/POINT CONTROL MODE CONTINUOUS SCAN MACHINE DIMENSIONS WIDTH 1,640 MM LENGTH 1,740 MM HEIGHT 2,700 MM WEIGHT (APPROX.) 2,000 KG

x-travel: 550 mm y-travel: 1200 mm z-travel: 450 mm control: 85er 8bit total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Measuring range X,Y,Z 1200,1800,1000 mm Software calypso Measuring head 5 axis Vast XXT

Zeiss Pro T advance 16/21 measuring machine

Measuring machine Zeiss Prismo 7 BJ 1997 generallueb. 2024

Measuring machine Zeiss WMM850 BJ 1988 generalueb. 2008

Zeiss UPMC 850 Carat measuring machine for sale • Travels: X = 750mm; Y = 850mm; Z = 600mm • Portal design • Pushbutton magazine with 8 slots • Measuring ball • Probe set • HP working station with monitor

Zeiss UMESS 850 measuring machine

length: 1600 mm width: 1400 mm weight of the machine ca.: 2.1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1300 mm width: 1100 mm weight of the machine ca.: 1.5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Software Zeiss Calypso Measuring head RDS VAST XXT Measuring range 1000,1600,600 mm Max Workpiece size 1220,1935,620 mm

1 x ZEISS-Stiefelmayer Duplex Measuring System Bauj. 11/1995 1 x Stiefelmayer Duplex Measuring System Bauj. 1985 1 x Stiefelmayer measuring system built in 1987 1 x Stiefelmayer measuring system built in 1987

Key data: 500 mm, 500 mm, 500 mm

The system was hardly used (order omitted) CMM DuraMax 5/5/5 ZEISS CNC Coordinate Measuring Machine (CMM) in Boom Design Maximum permissible length measurement deviation (MPE) according to ISO 10360-2:2009 Djwvuszb U Has Nu Iekn - MPE_E0 (3D) = (2.4 + L/300) μm for 18 - 22 °C - MPE_E0 (3D) = (2.7 + L/250) μm for 18 - 26 °C - MPE_E0 (3D) = (2.9 + L/200) μm for 18 - 30 °C Maximum permissible scanning probing deviation (MPE) according to ISO 10360-4:2000 within maximum permissible scanning test time (MPT) MPE_THP = 2.9 μm within MPT_tau = 55 s single-probe probe deviation Shape according to ISO 10360-5:2010 MPE_PFTU = 2.4 μm shape measurement deviation according to ISO 12181:2011 (VDI/VDE 2617 Part 2.2) MPE_RONt (MZCI) = 2.4 μm

Zeiss Vista BJ 2000 measuring machine Incl. Erowa UPC pallet/lining on the Vista

x-travel: 850 mm y-travel: 1200 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Universal 3D measuring center, double-column, modern software, many accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Measuring range width/ length/ height 1600/ 1800/ 1000 mm Dimensions Width/ Length/ Height 2450/ 2940/ 3800 mm max. workpiece weight 3500 kg Measuring machine weight 8500 kg Creep speed 0 - 5 mm/s Setup operation 0 - 70 mm/s Series measurement operation Axis max. 300 mm/s Vector max. 425 mm/s Software version Calybso 2023/ Service Pack 2 --- version 7.6.08 Various probes Transducer

balancing body min/max.: 30 - 5000 kg balancing body diameter with machining unit: 2100 distance of bearings: kleinster 240 mm dia. axle journal: 35 - 180 mm weight of the machine ca.: 400 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 630 mm -Width: 630 mm -Height: 130 mm -Plate thickness: 30 mm -with support ribs -Weight: 121 kg

Measuring and control ring for control of three-point internal micrometers Diameter 50mm Diameter 100mm Diameter 150mm Diameter 200mm More available

Cloos Welding Robot System Compact cell CC-4.1 Workpiece Positioner DV-TC-2,5 KN Dual station positioner with vertical station change Rotation speed 120° sec Rotation range 720° Load per workstation max. 25KN Clamping length 2000mm Clamping table system Demmeler Security technology Protective enclosure Maintenance door Workplace protection (light barrier) Welding technology Q-Pulse 451A Pulse power level 450A Water cooling Voltage: 450V Wire thickness 1.2mm steel Burner connection Euro Flow Switches Cable Qirox - Cleaning 8M Console for cleaning on the robot base The machine can be viewed under power at our location in 78737 Fluorn-Winzeln.

Including rack and transport yoke Auction-ID: A1-48474-204

Auction-ID: A1-49674-142

Article: profile turning trip dog Manufacturer: Schütte Many different sizes for Schütte profile turning attachment 68AE Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

pickoff with shaft for Schutte multi spindle automatic lathe SF67, used pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: draw bar Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: quadrant lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: feed lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push rod Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Technical data Mixed lot of cutting tools, tool holders and machine accessories. Configuration Various tool holders and tool holders Multiple milling heads and milling tools Drilling and boring tools Four-jaw chuck ATORN 3D Probe 2 tool mounting/holding fixtures with TUL KELCH SYSTEM labeling Other machine tools and accessories as shown in the illustrations Auction-ID: A7-49302-191

Article: pickoff with shaft Manufacturer: Schütte pickoff with shaft for Schutte multi spindle automatic lathe SF67 pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S holder B73GF1S1 Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

polygon turning unit for Schutte AG20, used 1 polygon turning unit type Saco SC 15.22.001-Nr.3 1 cardan shaft type Saco SC 15.52.188.00 1 gear box SC 15.22.001-Nr. 3 Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Auction-ID: A1-49027-110

Auction-ID: A1-49027-109

Auction-ID: A1-49027-108

Auction-ID: A1-49027-111

Auction-ID: A1-49027-106

Standard Auction-ID: A1-49309-64

Auction-ID: A1-49365-52

Various band saws Auction-ID: A1-49309-194

Auction-ID: A1-49365-49

Pallet with various canisters Auction-ID: A1-49001-41

Carl Mahr Esslingen E18-596 Concentricity test block Auction-ID: A7-48995-24

Auction-ID: A1-49027-103

Sale from candelabra/lamp post factory liquidation. Custom made workshop table. Wooden. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-20

Sale from candelabra/lamp post factory liquidation. Custom made workshop table. Metal frame, wooden top. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-18

Sale from candelabra/lamp post factory liquidation. Custom made workshop table. Metal. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-17

Sale from candelabra/lamp post factory liquidation. Custom made workshop table with drawers. Metal frame, wooden top. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-16

Sale from candelabra/lamp post factory liquidation. Roll stand. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-24

Sale from candelabra/lamp post factory liquidation. Workshop chair. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-30

Sale from candelabra/lamp post factory liquidation. Custom made workshop table. Metal frame, wooden top. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-19

Sale from candelabra/lamp post factory liquidation. Custom made workshop table with vise. Metal frame, wooden top. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-21

Sale from candelabra/lamp post factory liquidation. Workshop shelf. Metal. Conditions: according to the pictures. Missing, damaged parts, untested condition. Unverified quality. Auction-ID: A7-49389-29

Large set of professional tooling including flat and combination wrenches, files, hammers, chisels, mechanical accessories, chucks, tool holders and various metal equipment. Interesting set for mechanical workshop, maintenance, machining, locksmithing, metal construction or tool resale. Visible storage bins are included. Sale in a single lot with all the contents visible in the photographs. Auction-ID: A1-48554-259

2x heavy pulley pullers Auction-ID: A1-49309-124

2x roller stand Auction-ID: A1-49309-70

2 pulley pullers Auction-ID: A1-49309-68

Pallets with various materials (garden tools, brooms, etc.) Auction-ID: A1-49365-162

Various bending jigs Auction-ID: A1-49309-196

Various parts for turret lathe 1 pallet Auction-ID: A1-49309-60

Dimensions: White long: 295x58x40 Black cooling water tank: 260x45x40 Black chip conveyor: 190x57x115 White cooling water tank: 100x100x118 Auction-ID: A1-49365-15

Various punch brackets, stamps Auction-ID: A1-49309-56

Rear gauge digitally adjustable Auction-ID: A1-49309-185

Various wheels and roller track Auction-ID: A1-49309-166

Various hydraulic hoses And pressure gauge Auction-ID: A1-49309-79

Cabinet with various punches and dies For punching machine Auction-ID: A1-49309-76

Tool cabinet incl. accessories and tools for Mori Seiki Auction-ID: A7-49053-60

Cutting length 150 mm, sheet thickness 6 mm, flat steel 70 x 6 mm, round steel 11 mm, weight 13 kg, delivered in original packaging Auction-ID: A1-48552-87

Total 8 pieces of sanding belts, size 90 x 2600 mm, grit 50 Auction-ID: A1-48552-171

Cutting length 125 mm, sheet thickness 6 mm, flat steel 70 x 6 mm, round steel 11 mm, weight 12 kg, delivered in original packaging Auction-ID: A1-48552-132

Blades for Jörg cutting scissors type 4002/E, 3x length 1100 mm, 1x length 1020 mm, 2 pieces unused Auction-ID: A1-48552-23

SAMSYS - Multisam MUS 2000 Offer details Stock number 1039-9480 Machine Type: Bar Feeder Manufacturer: SAMSYS Type Multisam MUS 2000 Year of construction 2000 Country of origin Switzerland Additional information Bar loading magazine SAMSYS - Multisam MUS 2000 - NOT TESTED - as a spare parts donor Technical details Bar diameter 5 - 80 mm Bar lengths 250 - 1,550 mm Bar length -max. 1,550 mm Longitudinal movement 600 mm Height adjustment 775 - 1,175 mm Dimensions approx. 2.25 x 1.10 x 1.80 m Machine weight approx. 0.5 t Auction-ID: A7-49608-26

Transmission belts, drive belt, flat belt, leather belt, belt, transmission belt FROM leather, fabric, rubber, plastic direct from the manufacturer! All dimensions and qualities according to your possible! We customize for you and look forward to your inquiry!

Convolute (excerpt) from different tools - see picture

Pneumotec Workpiece Accumulator PWS 100 Year of construction: 06/2013 Plate diameter 220 mm Number of plates: 20 pieces Height 1200 mm +/-100 mm adjustable Width 780mm Length 3150mm

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

Auction-ID: A1-49027-102

Auction-ID: A7-49053-207

Universal plan and boring head ISO - 50 recording

3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Touches 3-points Steady Ø 800 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg

Auction-ID: A1-48824-106

Auction-ID: A1-47358-162

Auction-ID: A1-47358-165