boy injection moulding machines used for sale

Key data: 1000 kN, 157 g/PS, 42 mm

1.0 pcs. Two-component injection moulding machine electric Manufacturer: DR. BOY Type: 100E Type: 552 Year of Make: 2017 Clamping force: 100 tons Spar spacing (hxv) 430 x 360 mm Installation height MIN. 250 mm Screws DN 1: 42 mm Moulded part weight 1: 157.6 g/hp Screws DN 2: 24 mm Moulded part weight 2: 39.1 g/hp Control: PROCAN ALPHA Equipment: 1 x Core Pull Highly wear-resistant plasticizing unit Control Pneumatic Needle Gate Nozzle Dryer, manufacturer: FARRAG, year of manufacture: 2016

Clamping force: 220kN, min. mould height: 200mm, max. opening stroke: 200mm, max. platen distance: 400mm, ejector stroke: 80mm, machine dimensions X/Y/Z: approx. 2600mm/800mm/1600mm, weight: approx. 760kg. An on-site inspection is possible.

An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg, operating hours: 10524h. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible.

BOY 90A (102) Description Without funnel General information Item number: 102 Availability: In stock Year of construction: 2006 Brand: Boy Specifications Injection weight: 193 g Clamping force: 900 kN Screw diameter: 42 mm Spray pressure: 1724 bar Tie bar distance: 430x360 mm Clamping plate size: 635x610 mm Tool installationheight min.: 250 mm Control: Procan CT Language: German Power: 26.3 kW Operating hours: 15070 h Weight: 3100 kg Dimensions: 4.9x1.2x2.1 m Funnel: No

Key data: 12 , 10 , 18

Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision BOY 12A injection moulding machine. Fitted with the Procan controller and 18mm diameter screw, which gives a shot weight of 9.64 (PS)g. The 12A from BOY is one of the most common small moulding machines we see, it is extremely accurate while still maintaining versatility with tooling and familiar control setup. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP ...

This injection moulding machine from Dr. Boy is in good condition. The machine is from 2007 and has few working hours. Brand: Dr.Boy GmbH & Co.KG Model: 55M Year of construction: 2007 Clamping force: 55 T Screw diameter: 32mm Shot volume: 96.5 cm³ Working hours: 24,210

Key data: 805 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 80M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and ...

Key data: 220 kN, 22 mm

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and addi ...

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 55A injection moulding machine, fitted with the Procan CT Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on reques ...

rand: Dr.Boy Model: 60E Year of construction: 2023 Working hours: 50 Screw diameter: 32 mm Injection pressure max.: 2.142 bar Shotvolume max.: 100,5 cm3 Clamping force: 60 T Max. distance between holms: 360 x 335 mm Min. mould height: 250 mm Distance between plates max. 650 mm Measurements: 3.450 x 1.150 x 1.950 mm Weight: 2.250 kg Options: • Procan ALPHA 4 display • Hydraulic core pull (2x) • Air valve (2x) • Interface package (incl. RS232/485, OPC-UA + Licence fee) • 4 Free programmable AIO’s • Robot interface Euromap 67 • Interface between safety fence and machine Euromap 78 • Colouring contact interface • Quick change mould package – Cooling circuits (3x) on fixed & moving platen – Water distributor 8-fold – Ejector with quick coupling – Open nozzle with thread tip • Energy distribution box 6-fold (feeding via second cable)  ...

B&A REF: 9253 TON: 55 SCREW DIAMETER: 32MM SHOT WEIGHT: 92.3 STROKE VOLUME: 96.5CM3 INJECTION PRESSURE: 2127AR PLATEN SIZES: 565 X 540MM DBTB: 360 X 335 MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 650MM EJECTOR STROKE: 80MM CONTROLS: ALPHA MOTOR: 11 SERVO HEATING CAPACITY: 7.7KW

Key data: 220 kN, 9 g/PS, 28 mm

Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this Boy 22AVV injection moulding machine. Vertical clamp with vertical injection is ideally suited for insert moulding, the operator can load parts for over moulding easily. The pneumatic gate ensures safe operation. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing m ...

Injection moulding machine Arburg 270s 500-60 and Boy 12 M 1998

Key data: 350 , 28

BOY 35 E injection molding machine Type : 350-92 35E Year: 2013 Screw diameter : 28 mm Injection pressure: 1639 bars Injectable volume : 58,5 cm³ Weight in PS : 53,2 gr Clamping Force: 35 T Distance between tie bar bar: 280 x 254 mm Min mould height : 200 mm Maw daylight between platen : 500 mm Dimensions: 2400 x 820 x 1950 mm Weight: 1195 kg + BOY option : laminar flow

Key data: 220 kN, 27 g/PS, 22 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: DR. BOY Type: 22 D Year of Make: 1999 Clamping force: 22 tons Tiebar spacing: 254 x 254 mm Installation height MIN, / MAX. 200 / 400 mm Screws DN: 22 mm Moulded part weight 27 g/hp

Key data: 220 kN, 27 g/PS, 22 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: DR. BOY Type: 22 D Year of Make: 2004 Clamping force: 22 tons Tiebar spacing: 254 x 254 mm Installation height MIN, / MAX. 200 / 400 mm Screws DN: 22 mm Moulded part weight 27 g/hp

BOY 35 E injection molding machine in good condition Type : 350-92 35E Year: 2013 Screw diameter : 28 mm Injection pressure: 1639 bars Injectable volume : 58,5 cm³ Weight in PS : 53,2 gr Clamping Force: 35 Tons Distance between tie bar bar: 280 x 254 mm Min mould height : 200 mm Maw daylight between platen : 500 mm Dimensions: 2400 x 820 x 1950 mm Weight: 1195 kg + BOY option : a laminar flow and carrot peck

Key data: 900 kN, 42 mm

Stock No.: 503452 Manufacturer: BOY Type: 90 E Control: Procan ALPHA Year of Make: 2012 Hours: 49130 h Clamping force: 900 kN Tie bar h x v: 430 x 360 mm Panel size h x v: 635 x 610 mm Min. installation height: 250 mm Plate spacing max.: 725 mm Opening travel: 475 mm Screw diameter: 42 mm Capacity: 214.7 cc Spray pressure: 1724 bar Machine dimensions LxWxH: 4.37m x 1.21m x 2.2m Total Weight: 3730KG

Key data: 500 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request.  ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 35M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and addi ...

Key data: 1000 kN

Boy 100E / Hybrid Machine Year of Make: 2014 Injection unit: Screw diameter: 32 mm Injection weight: 92.3 g Spray pressure: 2127 bar Dosing volume: 96.5 ccm Clamping unit: Clamping force: 100 t Tiebar spacing: 430x360 mm Size of the clamping plates: 750x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha 2 - Touch Screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Control with air valve Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 3530 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 7.7 kW Total power: 22.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technica ...

Key data: 900 kN

Boy 90 M Year of Make: 2004 Injection unit: Screw diameter: 42 mm Injection weight: 193 g Spray pressure: 1724 bar Dosing volume: 214.7 ccm Clamping unit : Clamping force: 90 t Tiebar spacing: 430x360 mm Size of the clamping plates: 635x610 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan - Touch Screen Additional equipment: Euromap 12 Robot interface Air Valve x 1 Dimensions: Weight: 3100 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 11.3 kW Total power: 26.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 800 kN

Boy 80 M Year of Make: 1997 Injection unit: Screw diameter: 36 mm Injection weight: 132 g Spray pressure: 2085 bar Dosing volume: 147.6 ccm Clamping unit : Clamping force: 80 t Tiebar spacing: 410x358 mm Size of the clamping plates: 680x555 mm Ejector: hydraulic Clamping unit: toggle lever Control: Procan CT Additional equipment: Dimensions: Weight: 3200 kg Length/Width/Height: 4.14x1.21x2.07 m Drive: Pumps/motor: 15 kW Heating capacity: 10.4 kW Total power: 25.4 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 550 kN

Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition Year of Make: 2016 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 18,153 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW  ...

Key data: 550 kN

Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit : Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW ...

Key data: 550 kN

Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit : Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW ...

Key data: 100 kN

Boy XS / Excellent technical condition Year of Make: 2020 Injection unit: Screw diameter: 12 mm Injection weight: 4.1 g Spray pressure: 3128 bar Dosing volume: 4.5 ccm Clamping unit: Clamping force: 10 t Handlebar spacing: 160 mm Size of the clamping plates: 321x246 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha 4 - Touch Screen Additional equipment: Machine like new Euromap 67 Robot interface Air Valve x 6 Built-in side sprue picker Wittmann automatic conveyor with dryer of the Farratech brand It is possible to buy clamping elements for tools of the AMF brand Dimensions: Weight: 450 kg Length/Width/Height: 1.48x0.52x1.38 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical test ...

Key data: 900 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 90M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and addi ...

Key data: 550 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 55A injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and addi ...

Key data: 220 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 22A injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and addi ...

clamping force: 350 kN injection volume: 58,5 cm³ screw diameter: 28 mm platen size: 260 x 254 mm Condition: used, Specification: injection moulding machine for TPE - used clamping unit: - clamping unit: vertical - clamping force: 350 kN - opening stroke max.: 300 mm - platen distance max.: 500 mm - Mould installation height min.: 200 mm - Clear width between tie bars: 260 x 254 mm - Ejector stroke max.: 80 mm - Clamping unit: VV - Lift of protective bonnet: 500 mm Injection unit: - Screw diameter: 28 mm - Screw L/D ratio: 18.6 - Screw stroke max.: 95 mm - Injection volume max.: 58.5 cm³ - Injection pressure: 1577 bar - Plasticising flow: 8.6 g/s - Injection flow: 85.5 g/s - Connected load: 3x 400 V, 50 Hz - Max. heating power: 5.8 kW - Drive power: 7,4 kW - Total power: 13,2 kW - Hydraulics: 210 bar (tank 65 litr ...

clamping force: 500 kN injection volume: 76,5 cm³ screw diameter: 32 mm platen size: 360 x 335 mm Condition: used, as good as new Specification: Injection moulding machine for LSR - Demonstration machine as good as new clamping unit: - clamping unit: horizontal - Clamping force: 500 kN - Opening stroke max.: 400 mm - Platen distance max.: 650 mm - Mould installation height min.: 250 mm - Clear width between the tie bars: 360 x 335 mm - Ejector stroke max.: 80 mm Injection unit SP 82: - Screw diameter: 32 mm - Screw L/D ratio: 16.3 - Screw stroke max.: 95 mm - Injection volume max.: 76.5 cm³ - Injection pressure: 1076 bar - Plasticising flow: 13 g/s - Injection flow: 204.8 g/s - Connected load: 3x 400 V, 50 Hz - Max. heating power: 5.8 kW - Drive pow ...

Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement.

Offered is a Boy 80E 2K injection molding machine (year 2016, approx. 29398 operating hours) including 2C XS aggregate, Wittmann Primus 16 handling (year 2022), Dorner GAL-60 conveyor. 800kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw, completely enclosed, hydraulic ejector 42.7kN, EUROMAP 67 interface, robot stroke X/Y/Z: 2000mm/1200mm/620mm, conveyor 400mm width, 2m length. Viewing is possible by arrangement.

Engel injection moulding machine old

Control CC 100 for ENGEL injection moulding machines

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Key data: 3200 kN, 359 g/PS, 50 mm

1.0 St. gebr. Two-component injection molding machine Manufacturer: ARBURG Type: 720A3200-800/70 Year of Make: 2017 Clamping force: 320 tons Spar spacing 720 x 720 mm Installation height min./max.: 300 - 800 mm Opening travel: 600 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 359 g Screw DN 2: 22 mm Max. displacement: 34 cm³ Moulded part weight in hp: 31 g Control: Selogica Request technical equipment.

Ref. no.: 18255 Manufacturer: ENGEL Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ Advanta ...

Ref. no.: 18591 Manufacturer: ARBURG Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this ...

Ref. no.: 18092 Manufacturer: ENGEL Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil fe ...

Container Size (Max.): 2,5 l

Injection stretch blow moulding machines for PET bottles

Key data: 1500 kN

Clamping force: 150 t. Clamping type: Toggle system. Tie-bar spacing: 470 × 470 mm. Platen size: 700 × 700 mm. Mold height (min–max, approx.): 180–500 mm. Opening stroke: 420 mm. Ejector stroke: 130 mm. Injection volume: 320 cm³. Screw diameter: 42/45 mm (to be confirmed). Heating zones: 4. Machine dimensions: 5000 × 1400 × 2000 mm. Machine weight: 6000–7000 kg.

Key data: 3200 kN, 309 g/PS, 50 mm

Production Line Manufacturing Coffee Capsules NESPRESSO Consisting of the following components: Pos. 01) Injection moulds for capsules, manufacturer: FOSTAG AG 1.0 pcs tool with 16 cavities 1.0 pcs tool with 32 cavities Pos. 02) Two-component injection moulding machine, Bcobrsw Nriue Rvf Nyju Manufacturer: ARBURG, Type: 720A3200-800, Year of manufacture: 2017 The capsules are made as falling parts.

Key data: 1300 kN, 127 g/PS, 35 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ARBURG Type: 420C1300-350-60 Year of Make: 2003 Clamping force: 130 tons Spar spacing 420 x 420 mm Screws DN 1: 35 mm Moulded part weight in hp: 127 g Screw DN 2: 25 mm Moulded part weight in hp: 45 g Control: Selogica Equipment: . Core train -Robots

Ref. no.: 18635 Manufacturer: SEPRO Year of construction: 2022 Further information: The SEPRO S5-25 med is a powerful 3-axis servo linear robot designed for automated part removal and handling applications on injection moulding machines. The robot is in very good technical and cosmetic condition and comes from a clean production environment. The med” version is specifically designed for medical manufacturing and cleanroom applications. The robot was used exclusively for testing and training purposes and therefore has very low operating hours. The robot is additionally fitted with a Zimmer Group pneumatic rotation module and a Gimatic QCY90-A Quick Tool Changer system. The Zimmer module allows components to be rotated between defined positions, while the Gimatic system enables quick changing of grippers or vacuum tooling. These additional features increase the flexibility of the robot f ...

Key data: 800 kN, 30 mm

Stock No.: 503561 Manufacturer: ENGEL Type: VICTORY 200-80 Tech Control: CC100 Year of Make: 2005 Hours: 76988 h Clamping force: 800 kN Plate size h x v: 670 x 600 mm Min. installation height: 250 mm Plate spacing max.: 700 mm Opening travel: 450 mm Screw diameter: 30 mm Displacement: 99 cc Spray pressure: 1450 bar Equipment Screen text German CEE socket 16A Core pull hydraulic 1x Machine including conveyor belt Machine including handling Machine with water battery Machine without material hopper Levelling elements Schuko socket 10A Machine dimensions LxWxH: 4.05m x 1.93m x 2.2m Total Weight: 5200KG Technical Data Handling Machine type : Linear handling Make: Engel Control: ER-HLI 31 VC Year of Make: 2005 Handling weight: 2 kg On-screen text: German Total weight: 250 kg

Presse à injecter BILLION bi matière 750 T Type : H780/6860 - 750 Vis de 45 mm Vis de 90 mm Equipée du dosage électrique et start and stop

Key data: 3500 kN, 1100 g/PS, 70 mm

Year of construction 2010 Clamping force: 350 tons. Screw diameter: 70 + 30 mm Shot volume: 1155 cm³ + 113 cm³ Good condition

Key data: 2400 kN, 916 g/PS, 70 mm

1.0 PCS Gebr. Two Component Injection Molding Machine second aggregate is attached to the side. Manufacturer: NETSTAL Type: SYNERGY1700 - 110 Year of Make: 2004 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter 1: 70 mm Moulded part weight 1: 916 g/hp Screw diameter 2: 28 mm Moulded part weight 2: 59 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side

Key data: 2400 kN, 377 g/PS, 50 mm

1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is attached to the side, with Robots Manufacturer: NETSTAL Type: SYNERGY 2400-900 - 230 Year of Make: 2000 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter 1: 50 mm Moulded part weight 1: 377 g/hp Screw diameter 2: 32 mm Moulded part weight 2: 99 g/hp Equipment: Robot, manufacturer SEPRO Core slides 2 x DS / 1 x AS Second unit is mounted on the side Robot SEPRO

Key data: 1750 kN, 337 g/PS, 50 mm

1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is attached to the side Manufacturer: NETSTAL Type: SYNERGY 1750-900-230 Year of Make: 2012 Clamping force: 175 tons Tiebar spacing: 510 x 510 mm Screw diameter 1: 50 mm Moulded part weight 1: 377 g/hp Screw diameter 2: 25 mm Moulded part weight 2: 47 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side

Key data: 1750 kN, 377 g/PS, 50 mm

1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is attached to the side Type: SYNERGY 1750-900-230 Year of Make: 2016 Clamping force: 175 tons Tiebar spacing: 510 x 510 mm Screw diameter 1: 50 mm Moulded part weight 1: 377 g/hp Screw diameter 2: 25 mm Moulded part weight 2: 47 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side Robot Wittmann, Year of manufacture: 2016

Key data: 1200 kN, 123 g/PS, 35 mm

1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is mounted on the side Manufacturer: NETSTAL Type: SYNERGY 1200-460 - 60 Year of Make: 2006 Clamping force: 120 tons Handlebar spacing: 460 x 460 mm Screw diameter 1: 35 mm Moulded part weight 1: 123 g/hp Screw diameter 2: 20 mm Moulded part weight 2: 31 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side

Specifications: - Brand/product line: Supernova - Product type: cleaning granulate / purging compound - Application: Injection Molding Machine Cleaning - Number of packages: 5 boxes - Net weight per package: 20 kg - Total net weight: approx. 100 kg - Shape: granules / granules - Industrial application within plastics processing Application: - For cleaning/purging injection moulding machines - For cleaning cylinder and plastic processing system - Can be used for material and color changes, depending on product specifications - For removing residual plastic/material residues from the processing system Condition / Comments: - Batch consisting of 5 boxes. - Net content: 20 kg per box. - Total net weight: approx. 100 kg. - Exact variant and technical product specifications not determined. - Delivered in the condition and packaging as shown. - See photos for a further impression of the lot and ...

with spare screw, high-pressure hose and various spare parts - see pictures

This Krauss Maffei 200-1000 C2 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 560 x 560 mm and an opening stroke of 700 mm. It includes a screw diameter of 55 mm and is equipped with 1 core valve, 3 air valves, and an EU 12 connector for robot integration. A solid choice for expanding production capabilities. For more information about this hydraulic injection moulding machine, please reach out to us.

Hydraulic injection moulding machine manufactured in 1999. This Krauss Maffei KM800-5700 MC features a clamping force of 8000 kN and an injection unit size of 5700. It has a maximum mould height of 1,100 mm and an opening stroke of 1,400 mm. If you are looking to get high-quality moulding capabilities, consider the Krauss Maffei KM800-5700 MC machine we have for sale. Contact us for further details.

2 pcs. molds with 1-1 cavity, automat with hot runnel control, PP material molds sizes both: 300x245x213 mm machine size min. 25 T

1 cavity from PP material mold sizes: 383x450x384 mm machine size min. 100 T

Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA900ІІ features a clamping force of 900 kN and a mold opening stroke of 320 mm. It has a screw diameter of 36 mm and a theoretical shot volume of 153 cm³. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA900ІІ machine we have for sale. Contact us for further details.

The injection momlding machine corresponds to the hydromechanical two-platen series, clamping force: 550t, operating hours: approx. 80h, with Handling Krauss Maffei KM 250/ LRX-S 250. An on-site inspection is possible, the machine is located in Mexico.

A vertical injection moulding machine from ARBURG is offered. Clamping force: 50t, table size X/Y: 500mm/420mm, max. shot volume: 65cm³, min. opening width: 272mm (172mm), max. opening width: 522mm (422mm), hydraulic/pneumatic cascades: 2/4, hydraulic/pneumatic core pulls: 0/0, hydraulic operating hours: 6979h, automatic operating hours: 4696h, total cycles: 142609. Including shuttle table. Documentation available. Inspection possible by arrangement.

Used injection molding tools for the manufacture of plastic slippers. Offer total 43 pcs. refers to two cavities tooling and accessories. From small children (23) to men (45) in size, it is suitable for the manufacture of slippers of various types and colors. For sale total 12,900 Euro

Clamping force: 300kN, tie-bar spacing: 270x270mm, cylinder diameter: D15, control: Arburg Control+, automatic operating hours: 63.212h, pump operating hours: 63.212h, cycles: 15.328.195. An on-site inspection is possible.

Clamping force: 500kN, tie-bar spacing: 320x320mm, cylinder diameter: D30, control: Arburg SLOGICA, automatic operating hours: 63.147h, pump operating hours: 65.755h, semi-automatic operating hours: 14h, cycles: 13.943.435. An on-site inspection is possible.

Vertical injection moulding machine manufactured in 2016. This Battenfeld CM 40 features a machine weight of 5200 kg and a working height of 1000 mm. The machine is equipped with a robust safety system, ensuring operational safety. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld CM 40 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 2 units available, this machine offers reliable performance for your production needs. If you are looking to get high-quality plastic processing capabilities, consider the Krauss Maffei 35-180 CX machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details.

Condition: used, with visible signs of use, was operational until placed in storage, control voltage: 24V, operating voltage: 230V, frequency: 50Hz, CO₂ pressure: 10bar, connected load: 500W, with CE marking. An on-site inspection is possible.

Hydraulic injection moulding machine manufactured in 2007. This Krauss Maffei 300-1400 CX features a clamping force of 3,000 kN and a tie bar distance of 630 × 630 mm. It includes a hydraulic clamping unit drive and an injection unit size of 300–1400. If you are looking to get high-quality moulding capabilities, consider the Krauss Maffei 300-1400 CX machine we have for sale. Contact us for further details.

Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.

Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible.

Clamping force: 1600kN, width: 1600mm, height: 2200mm, weight: 6.8t, an on-site inspection is possible.

Clamping force: 650kN, length: 4000mm, width: 1600mm, height: 2200mm, weight: 3.9t, an on-site inspection is possible.

Clamping force: 1500kN, rated current: 133A, connected load: 74kW, an on-site inspection is possible.

Clamping force: 800kN, an on-site inspection is possible.

Electrical injection moulding machine manufactured in 2005. This Husky Hylelectric H1000 RS95/80 features a clamping force of 10,000 kN and a maximum injection pressure of 2280 bar. It has a total platen size of 2070 x 1840 mm and a screw diameter of 80 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky Hylelectric H1000 RS95/80 machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2005. This Husky Hylelectric H1000 RS95/80 features a clamping force of 10,000 kN and a total platen size of 2070 x 1840 mm. It has a maximum injection pressure of 2280 bar and a screw diameter of 80 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky Hylelectric H1000 RS95/80 machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2022. This HAITIAN Mars III MA 600/130B eco features a clamping force of 600 kN and a maximum injection pressure of 1,840 Bar. It has a screw diameter of 28 mm and accommodates molds with a maximum height of 330 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Mars III MA 600/130B eco machine we have for sale. Contact us for further details.