bobst presses: flexo and rotogravure used for sale

Bobst SP 1650 E Max.Size: 11501650mm Min.Size: 570850mm Max Speed: 4500sh/h Year 1970 In good production condition.

Bobst SP 130 E Year 1985 Max.Size: 920x1300mm Min.Size: 450x580mm Max Speed: 7000sh/h Max. Cutting force: 500T center line Immediately available.

Hot foil stamper, available now, fully workshop refurbished, ready to test • ELEVATED MACHINE Machine elevated 415 mm, included elevation of the steps • Step • Centerline for job quick change • Electronic device for sheet travel control • Air conditioning for the electrical cabinet • Gripper bars • Bobst-electronic for managing the machine • Motore principale con variatore di frequenza • Pianale porta-pila con leva per la correzione laterale manuale della pila durante la produzione • NON-STOP FEEDER MANUAL DEVICE • Adjustable lateral blowers with Centerline references • Suction unit with multiple adjusting • Safety system for lowering the pile try • Introduction table covered by antistatic steel stainless plate • Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle • Feed belt slow-down device Ensures  ...

Web Width: 2450 mm

semi-automatic packaging aid for folder-gluers, boxes, folded flat: max. 400 mm, min. 50 mm, length of the boxes: max. 500 mm, min. 100 mm, standard, right-hand delivery, own drive in the rotary module, vibrator, own drive in the delivery, infinitely adjustable via potentiometer, standalone solution via speedometer, processable materials: solid board, E-flute, box types: ordinary folding boxes 4+6 dot boxes, with or without lid. Overhaul 2025: cleaned, checked, painted, new belts and belts

Flexo printing machine BOBST M6 + Milltex cutting machine Substrate width: 670 mm Print width: 660 mm Maximum speed: 200 m/min Monomatic Unwinder DZ15.67TB with Automatic Splicer Vario™ servo drive for inlet and outlet Kelva web cleaner Wet lamination in the printing unit Corona Treater – Vetaphone 13 flexographic printing units V-Flower Flexo Printheads in Sleeve Solution Drying system with 2 drying hoods – total drying length: 4.4 m GEW E2C HP 180 W/cm² UV Drying Lamps Two rail turning strips Lamination and cold foil stamping AVT Helios S Turbo HD System 2 barcode verification modules Laboratory color measurement with Delta E BST Powerscope Camera Web decrimping device 2 perstatic pumps for flexographic printing units 13 pressure sleeves 13 anilox rollers up to 550 lines/cm Milltex Sincroflex sheeting machine, built in 2020 Sheet cutting machine for paper ...

Reference ID PP56956 Category Folder Gluer Manufacturer Bobst Model MEDIA 100 II-A2 Year Built 1999 Color - Impression - Working Hours - Speed - - Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description Brand: BOBST Model: MEDIA 100 II-A2 Year of Manufacture: 1999 Origin: Switzerland Condition: 100% functional Machine Availability: Can be inspected on site in running condition Working Formats Maximum working width: 1000 mm Minimum working width: 126 mm Minimum board width before gluing: approx. 100 mm Maximum unfolded box length: 600 mm Minimum box length: 60 mm Maximum format: at least 600 mm Note: According to the operator, larger boxes may also be produced on this machine; final confirmation should be checked in the technical documentation. Example: A format of at least 600 mm can be processed, based on 150 mm x ...

Qty. 1 Second-hand Automatic Die Cutter Mfc.: Bobst Type: 102 E II Automatic Die Cutter Built: 1996 Speed: 7,500 Sheet per hour Max. Sheet Size 720 x 1020 mm Raised: 30 cm Steel Plate Feeder Lefthand Pull Sidelay Active Front Lays CUBE Touch Screen Computer Operation Chase with 1.0 mm Cutting Plate Centerline Micrometric Adjustment Quick Lock Chase Double Action Stripper Quick Lock Stripping Frames Spare Stripping Frames Selection Bars And Pins Non stop Delivery New Chains, Clutch & Brake 3 Years ago, only used as a backup machine since then

Format range: max. 1000 mm, min. 56 mm Equipment: Longitudinal seam, folding floor, double edge, 4-point gluing, motorised format adjustment, servo overhaul folding with program memory, Robatec electronic top gluing unit with 4 application heads, disc bottom gluing unit on the left, feeder with vibrator, belt crusher on the right, left up to max. 30 mm, additional central transport, folding floor module A2 with additional upper and lower centre transport, additional central transport in folding station, pneumatic kicker, counter, Bobst CUBE control, camera surveillance, Small box equipment, pneumatic press belt. Overhaul in 2026: cleaned, checked, painted and with new press belts as well as new feeder and transport belts. Other: Machine can be viewed by appointment while running.

Reference ID: PP-58435 Category: Folder Gluer Manufacturer: Bobst Model: DOMINO 145 MATIC A4 Year Built: 1993 Impression: - Working Hours: - Condition: Good Location: Europe Availability: Immediately Machine Description: Machine Options: • Straight-line gluing • Straight-line upper gluing • Straight-line gluing + EUR lock • Crash lock / crash lock with partition • Special – conical construction Workable Materials: • Solid board • Flute N • Flute F • Flute E • Flute B Machine Equipment: • HHS Xtend2 gluing system • LNT 300 gluing check, 1x under wheel • PL500 gluing nozzles, 4 pieces • Prefolding tool for gluing flap • Under gluing wheels width: 5 mm and 10 mm

Format range: max. 800 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, feeder with vibrator and tooth gauge, Accufeed, cutting alignment according to the feeder right and left, Pre-crusher right and left with lower central transport, electronic HHS upper gluer with 2 application heads, HHS quality assurance system with code reader, glue seam control and flipper ejector, disc bottom glue unit left, Digital positioning system for format setting with memory spaces (CS), digital position indicators, radio remote control, electronic control Bobst C.U.B.E, A2 folding floor module, video surveillance of the transfer station, upper and lower central transport in folding, kicker, counter, pneumatic, long press belt. Overhaul 2026: cleaned, checked, painted, new feeder and transport belts. Machine can be viewed by appointment while running.

Format range: max. 750 mm, min. 66 mm. Equipment: Longitudinal seam, folding bottom, double edge, dental gauge, vacuum and vibrator at the feeder, cutting alignment module with alignment right / left, primary crusher right and left with central transport top / bottom, disc subgluer left, digital position indicators, electronic top gluer HHS 8-channel with 4 application heads, Quality assurance system HHS with disc glue monitoring and 2x nozzle glue monitoring, pinball, camera monitoring of the tray, Central transport top/bottom in folding, press roll device, radio remote control, pump-up glue unit, long press belt. Overhaul 2026: cleaned, checked, painted, new feeder and transport belts. Machine can be viewed by appointment while running.

CUBE control system, 2 universal frame, Centre Line, Blanking station, Direct pallet loading, Automatic Universal feeder with non stop facility, Adjustable feed table with complement of infeed table furniture, Left and right hand side register lays, Bottom mounted gripper system, Double action stripping, Binder sheet insertion, hin plate with micro metric adjustment, tools for loading and transporting, Elevated 410 mm, MACHINE IS COMPLETELY WORKSHOP REFURBISHED !

• Reference ID: PP-59393 • Category: Flexo Printer • Manufacturer: Bobst • Model: SPO 1600 / Flexo 160 • Year Built: 1988 • Colors: 2 • Speed: 6,000 sheets/hour • Max. size: 1,600 x 1,100 mm • Min. size: 600 x 520 mm • Condition: Good • Location: Europe • Availability: Immediately Machine Description: • SERCO Feedmaster Prefeeder • BOBST Flexo 160 – 2 Colour Printing Units • Conveyor • BOBST Autoboard SPO 1600 Die Cutter Technical Specifications: • Maximum Sheet Size: 1,600 x 1,100 mm • Minimum Sheet Size: 600 x 520 mm • Maximum Cutting Force: 400 Tons / 4 MN • Maximum Speed: Up to 6,000 Sheets/Hour • Suitable for Corrugated Board Production • Heavy-Duty Swiss Construction • The equipment is currently installed and in production, allowing inspection under power and production testing.

COMPLETELY WORSHOP REFURBISHED ! Min. size 350 x 500 mm / 920 x 1260 mm Speed of 5,000 c / h Quick clamping system in the stripping station Paper 80 g / m2 Cardboard max 2000 g / m2 16 heating zones Temperature 50 ° to 160 ° Autoplaten concept Stripping

Format range: max. 1100 mm, min. 126 mm. Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, cutting alignment module according to the feeder, electronic ERO top gluer with 4 application heads, Disc subglue unit on the left, electronic overhaul folding with servos, vibrator with tooth gauge on the feeder, additional central transport in the primary crusher, primary crusher right and left, kicker, counter, additional central transport in folding, long, pneumatic, intermittent press belt, cleaned, tested, new feeder and transport belts. Machine can be viewed by appointment while running.

Details Reference ID: PP-60494 Category:Flexo Printer Manufacturer: Fischer & Krecke (Bobst) Model: FP16-S10 Year: 2011 Color: 10 Speed: 500 m/min Max. Size: 1500 mm Condition: Very Good Location: Europe Availability: Immediately Machine Type: Central Impression (CI) Flexographic Printing Press Gearless Drive: Yes Number of Colors: 10 Ink Type: Solvent-Based Machine Status: In Production Available From: October 2026 Latest Removal Date: December 2026 Technical Specifications Maximum Web Width: 1,500 mm Maximum Printing Width: 1,450 mm Printing Repeat: 390 – 1,050 mm Maximum Mechanical Speed: 500 m/min Suitable Materials The machine is designed for printing on: PE, OPP, CPP, PA, PET and Paper Material Thickness Minimum: 12 micron Maximum: 200 micron Unwinder Automatic Turret Unwind Shafted & Shaftless Operation Maximum Reel Diamet ...

Reference ID: PP-60403 Category: Flexo Printer Manufacturer: Bobst Model: 20SIX Year: 2014 Color: 8 Speed: 400 m/min Max. Size: 1300 mm Condition: Very Good Location: Europe Availability: Immediately Description Machine Type: Central Impression (CI) Flexographic Printing Press Gearless Drive: Yes Number of Printing Colors: 8 Ink Type: Solvent-Based Machine Status: In Production Available From: August 2026 Latest Removal Date: December 2026 Technical Specifications Maximum Web Width: 1,300 mm Maximum Printing Width: 1,250 mm Printing Repeat Range: 320 – 800 mm Maximum Mechanical Speed: 400 m/min Suitable Materials The machine is suitable for printing on: PE, OPP, CPP, PA, PET and Paper Material Thickness Range: Minimum: 12 micron Maximum: 200 micron Unwinder Automatic Turret Unwind Shafted & Shaftless Operation Maximum Reel Diameter: 1 ...

Format range: 720 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue with 2 application heads, disc glue on the left, Bobst CUBE control, vibrator & dental gauge on the feeder, Pre-crusher right and left, kicker, counter, digital position indicators, Folding floor module A2 with additional means transport above / below, additional means transport at the top / bottom of the fold, pneumatic Press belt. Overhaul 2022: cleaned, tested, painted, new Feeder and transport belts. Other: Machine can be visited by arrangement while running.

Bobst Domino 165 A3 MOT – Folder gluer Year: 1992 Working width: 290–1,650 mm Straight-line, 3-point gluing and crash-lock bottom applications Equipment: HHS XT-E8 upper gluing system, 8 channels, 4 PL-500 heads Vacuum feeder, pre-breakers and motorised format adjustment Bump-and-turn station for 90° rotation HHS hotmelt station 2 Enpro units for tear-strip and self-adhesive application Additional crash-lock bottom module and alignment units Pneumatic timed compression belt Condition: The 4-point module is not operational. A quotation for conversion or repair of this module is available. Reference: PP-58602 Further information on request.

Bobst SPO 160S / Flexo 160 – Flexo printing and die-cutting line Year: 1997 Printing units: 3; bottom printing Max. sheet size: 1,600 × 1,100 mm; Min.: 600 × 520 mm Speed: up to 5,500 sheets/h Equipment: Prefeeder, Flexo 160, SPO 160S and breaker/separator Vacuum sheet transport Ceramic anilox rollers in all printing units Rubber-roll inking in units 1 and 2; unit 3 additionally with doctor blade No dryers or dust extraction fitted. Reference: PP-58379 Further information on request.

BOBST 102 E II year 2000 max. size 72 x 102 cm min. size 35 x 40 cm max. speed 7,500 sheets/hour max. pressure 250 tons thickness 80 to 2.000 g/m2 feed table die-cutting section stripping section delivery with non-stop rack Centerline system BOBST electronic system Standard Equipment Die-Cutting Upper Chase lower cutting plate (4 mm) lower support plate with adjustable centering upper stripping frame with tooling quick locking device lower stripping frame with tooling standard-height platform without pile changer upper chase, screw-fixed removable upper chase compensation plate 3 mm adjustable centering lower stripping equipment front waste removal device in production good condition

BOBST SP 102 E - Car plates year 1984 82,500 running hours max. size 740 x 1,040 mm min. size 350 x 400 mm max. speed 8000 sheets / hour max. cutting force 250 T manual non–stop feeder 1 pull side lay guide o.s. 1 cutting chase with quick lock 1 cutting chase without quick lock 1 cutting plate 4 mm and 1 cutting plate 5 mm Centerline Micrometric device (1mm plates) stripping section 1 set stripping frames (quick lock) with tools in production good condition (upgraded)

Reference ID PP-62454 Category Folder Gluer Manufacturer Bobst Model MISTRAL 110 A2 Year Built 2006 Color - Impression - Working Hours - Speed - - Max. size 1,100 mm Min. Size - Condition Good Location Europe Availability Immediately Machine Description The BOBST Mistral 110 A2 is a high-performance folder gluer designed for various folding carton and corrugated board applications. 6 gluing points HSS glue control system 4 cold glue nozzles Lower left gluing system with glue disc and double scraper Removable glue tank Automatic glue level control system Kurandt lower glue trace detector Kurandt Compact Series code reader BOBST rotary ejector with box advancement device Left alignment conveyor Main gauge with lateral and longitudinal adjustment Gauge blade with blower Electric pile vibrator Lower central conveyor Upper central conveyor Central low ...

Fully automatic flatbed die-cutter, non-stop feeder, automatic introduction with large vacuum plate, double sheet cleaning station, platinum unit, turn die cutting frame, (batch delivery) non-stop delivery with belt, cutting force 300 TON, 4.500 speed/h, working with corrugated cardboard of thickness max. 9.5 mm, min. 0.8mm, The Machine Can Cut On Micro-corrugated Cardboard, Jobs Quick Change Device, Working With Compact Stock Of Thickness 1 mm And Beyond, Cutting Force 350 TON, Format: Max. 1055x1575mm, Min. 400x600mm, Standard Accessories

BOBST SP 102 - SE year 1992 A Die Cutting machine of size 72 x 102 cm Equipped with : Max. sheet 720 x 1020 mm, Min. sheet format 350 x 400 mm Pressing force 2.5 MN (250 tones), NON Strop feeder and delivery Max. speed 7500 S/Hour, Quick lock system, Suction head feeder, Cutting section Stripping section. IN VERY Good Condition ! (No Air Compressor, machine was plug on a Air Central)

Bobst SP 130 E Year 1985 Max.Size: 920x1300 mm Min.Size: 450x580 mm Max.Speed: 7000 Sh/h Max. Cutting force: 500 T Centerline Immidiately available.

Bobst 1080

Bobst Cube / monitor with control unit for transfer station, Bobst Alpina 110 II matic. Used and tested. Bobst cube / monitor with control unit for transfer station, Bobst Alpina 100 II matic. Used and tested. BSA07320000TG / H12P+P50S1

Control Card / Plug-in Circuit / PCB Board for Bobst Alpina 110 II matic. Control card / plug-in circuit / PCB board for Bobst Alpina 110 II matic. BSA0701239601

Printed circuit board 734 QI (PCB) / control PC with integrated touch display on the insert, for Bobst Alpina 110 II matic. PCB Printed circuit boards 734 QI / control PC with integrated touch display on the feeder, for Bobst Alpina 110 II matic. Manufacturer numbers and replacement numbers: BSA07230000BW / BSA07230000BT / BSA07340000TH

Sheet format: max. 1060 x 746 mm, min. 400 x 350 mm Equipment: Stripping station, depaneling, centerline, floor storage in depaneling station, Quick-Lock quick-release closing frame, max. machine speed 9,000 sheets/hour, max. die-cutting pressure 260 tons, processable materials: paper min. 70g/m², cardboard / solid board max. 1,000 g/m², corrugated cardboard up to 2 mm. Condition: Not operational Sale exclusively as spare parts donor Missing parts: Pumps, Grippers, Chain, Cube, Various Electrical Components Other: Machine can be visited by arrangement.

Completely overhauled ready for testing Machine Electronic device for sheet travel control Air conditioning for the electrical cabinet Gripper bars C.U.B.E. Bobst-electronic for managing the machine C.U.B.E. Bobst-electronic for managing the complementary equipment BM Main motor Feeder Pile-tray with handle allowing manual lateral correction of the pile during production SPECIAL SHEET BREAKER DEVICE. To push the sheets downwards, ensuring good stacking NON-STOP FEEDER MANUAL DEVICE Adjustable lateral blowers with Centerline references Suction unit with multiple adjusting Safety system for lowering the pile try KERSTEN ANTISTATIC DEVICE ON THE SHEET FEEDER FOR SHEET TRAVEL Introduction table Covered by antistatic steel stainless plate Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle 4 front lays, adjustable in p ...

Reference Num.: 4274 Brand: BOBST Type: SP 142 CER Construction year: 1995 Available: directly Status: In production Location: Deutschland

Impressions=0 m, Condition= Very Good , Availability= 2025-12-23, Bobst Speria 106 Sheet Counter: 200 million Maximum format: 740 × 1060 mm Minimum format: 350 x 400 mm Maximum Speed: 7700 sheets/hour Pressure: 260 tons Stripping station CUBE control Centreline system for quick job changes Quick lock stripping frame Micrometric adjustment 1mm thin plate system Electronic sheet travel control Double-action stripping OS pull side lay OOS push side lay Make-ready table - stripping Non-stop delivery

max. sheet format 1040 x 740 mm, min. 400 x 350 mm, stripping station, centerline, non-stop feeder, non-stop deposit, drawing mark left, sliding mark right, gripper edge separation, raised 41cm, production hours: 25,000, Bobst-Cube control, micrometer adjustment, electric double sheet control, 1 upper die-cutting frame with quick-release fastener, 1 die-cutting plate 4mm, 1 upper stripping frame, 1 lower stripping frame, max. machine speed 7000 sheets/hour, max. punching force 250 tons, Processable materials: paper min. 80g/m², cardboard up to max. 2000g/m², corrugated cardboard up to 4mm. Overhauled, repainted

Max. sheet size: 740 x 1040 mm Min. sheet size: 350 x 400 mm Max. production speed: up to approx. 8,000 sheets/hour Max. die-cutting force: approx. 250 tons Paper / cardboard thickness: 90 g/m² – 2,000 g/m² Max. corrugated board thickness: approx. 4 mm 68,372 operating hours Standard machine with existing accessories Pallet feeder (NonStop) Pull lay on the left side Stripping station Blanking station Non-stop delivery min. 4 × upper frames min. 4 × lower frames 2 × quick-lock frames

Reference ID: PP-56668 Category: Flatbed Die Cutter Manufacturer: Bobst Model: SPO 1600 Year: 1986 Speed: 6000 sheets/h Max. size: 160 × 110 cm Min. Size: 60 × 52 cm Condition: Good Location: Europe Availability: Immediately

Reference ID PP-57800 Category Flatbed Die Cutter Manufacturer Bobst Model SP 130-E Year Built 1985 Color - Impression - Working Hours - Speed 7000 sheets/h Max. size 130x92 cm Min. size 58x45 cm Condition Good Location Europe Availability Immediately

Reference ID PP-58237 Category Flatbed Die Cutter Manufacturer Bobst Model SP 142-ER Year Built 1985 Color - Impression - Working Hours 75690 Speed 6000 sheets/h Max. size 142 x 102 cm Min. size 70 x 50 cm Condition Good Location Europe Availability Immediately Machine Description Double Stripping working hours 75690

Bobst Sprintera 106 PER - with PowerRegister, Jahr 2003, Paper_ Cardboard_ Corrugated, From 70 g/m2 250 - 2000 g/m2, E flute and B flute up to 4 mm, Sheet size max. 1060 x 760 mm min. 400 x 350 mm, Die Cutting with gripper max. 1060 x 745 mm, Embossing max. 1060 x 740 mm, Gripper size from: 9 - 17 mm, The cutting knives height 23.8 mm, Embossing height 6.35 / 7 mm, Pressure 2.5 MN max., Speed (sh/h.) max. 12,000, Pallet height max. 1600 mm., Inclusive : - Power Register -, Height 60cm - Quicklock System, Centerline

Bobst SP 102 CER, Max.Size: 720x1020 mm, Min.Size: 350x400 mm, Year 1988, Max.Speed: 8000 Sh/h, Max.Cutting force: 250 T, Centerline, Quicklock system, Non-Stop in Delivery

hoogte vijfde wiel, Max.Size: 800x1120mm, Min.Size: 380x450 mm, Max.Speed: 6500 Sh/h, Jahr 1974, Centerline, Quicklock system, in production

Bobst SP 102 CER, Max. size: 720x1020 mm, Minimum size: 350x400 mm, Year 1988, Max.Speed: 8000 Sh/h, Max. cutting force: 250 T, Centerline, Quicklock system, Non-Stop in Delivery

Bobst SP 142 ER, Year 1987, Max. size: 1020x1420 mm, Min. size: 700x520 mm, Max. speed: 6000 Sh/h, Max. cutting force: 600 T, Centerline, micrometer adjustment, in production

Bobst SPO 1575 + 2 Color Flexo Printing Unit, Jahr 1994, Max.Size: 1575x1075 mm, Min.Size: 600x400 mm, Max.Speed: 4500 Sh/h, Max.Cutting force: 350 t, Flexo Printing Unit year 1974

Bobst SPO 160 ER - Matic, Year 2002, Max. Size: 1620x1120 mm, - Prefeeder Bobst C-160E Matic, - Transfer and aligning section with side and front alignment, - Die cutting section with center line, - Stripping station with quick lock system, - Blanking station with quick lock system, - Chase Loader for the preparation of the cutting form outside the machine, - integrated palletizer with batch control unit, - Computer with Matic Setup and Control system

Bobst SP 142 E, Year 1992, Max.Size: 1020x1420 mm, Min.Size: 500x700 mm, Max.Speed: 6500 Sh/h, Max.Cutting force: 600 T, Centerline, Quicklocksystem

Format range: Boxes, folded flat: max. 400 mm, min. 50 mm Length of the boxes: max. 500 mm, min. 100 mm Equipment: Standard, left-hand delivery, own drive in the rotary module, vibrator, own drive in the delivery, infinitely adjustable via potentiometer, standalone solution via speedometer, processable materials: solid board, E-flute, carton types: Ordinary folding boxes 4+6 dot boxes, with or without lids. Overhaul 2026: cleaned, checked, painted, new belts and belts. Machine can be viewed by appointment while running.

Impressions=0 m, Condition= Very Good , Availability= 2026-07-07, 3 point gluing Side gluing Suitable for straight line boxes Bottom and top glue application discs available With standard equipment

Size: 1420 x 1020 mm Equipments: Max. speed 6,000/h Gripper 18–22 mm Max. sheet 1420×1020 mm Min. sheet 700×500 mm Die-cut force 600 t Stripping station Intermediate sheet feeder Pre-pile device Working platform Cardboard 100–1000 g/qm2 & corrugated Tool prep table 6× chases · 6× stripping frames · 6× setup trolleys

Impressions=0 m, Condition= Very Good , Availability= 2026-07-07, Hot Foil Stamping Machine Carton board min: 80 gr Carton board max: 800 gr Corrugated board max: 2 mm Sheet size min: 29,5x35 cm Sheet size max: 78x108 cm Speed max: 4000 s/h Stamping speed max: 4000 s/h Stamping & embossing size max: 78x108 (Longitudinal) Stamping & embossing size max. 78x108 (Transversal) Die cutting size max: 78x108 Temperature max 180 ºC Foll length: 1000 meter Longitudinal: Web width advance shafts: 72 cm Transverse: Web width advance shafts 102 cm Max. pile height (feeder unit): 120 cm Max. pile height (delivery unit): 120 cm It is in very good condition Avaliable immediately

Impressions=0 m, Condition= , Availability= 2026-07-07, Full revised in 2023 3 point glueing NORDSON” Cold Glueing System "ERO" Glueing System 2023 (optional) KQ” Glueing System 2023 (optional) With standart equipments Regularly maintained by Bobst It is completely overhauled in 2020 It is completely cleaned and painted It is in perfect condition Available immediately

Impressions=0 m, Condition= Good , Availability= 2026-07-07, With chases and frames In a good condition Can be seen in our warehouse in Istanbul Available on October 2021

Bobst Domino 145 Matic, • Construction year: 1990, • longitudinal stitch, • with electronic glue system hhs4, • 4/6 point gluing, • max.size: 1100 x 1450mm, • Cold-glue electronics glue system hhs with 6 nozzles, • Hot-melt electronics glue system hhs with 4 nozzles, + Alignment station, + Ring inserter, + Pressband, • Material : Corrugated cardboard and solid cardboard, • Year of construction: 1990, • max.size: 1100 x 1450mm

Impressions=0 m, Condition= Very Good , Availability= 2026-08-20, 2026 Revision Max Speed Rating (Sheets / Hr) 9,000 / hour Substrate types (Paper / Board / Corrugate) Paper / Board Quick Action Plate Clamps Centre Line System Yes Stripping Station: Yes Blanking Station: No Oil heater with timer Yes Quick-lock Yes Pre-Make-Ready devices Chase changer Very good condition Immediately available

Bobst SP 142E, Year 1982, Max.Size: 1.420 x 1.020 mm, Min. Size: 700 x 500 mm, Max.Speed: 6.500 Sh/h, Max. Cutting force: 600 T, Running hours: 19.125 h, Centerline, Max.Size: 1.420 x 1.020 mm, Min.Size: 700 x 500 mm, Max.Speed: 6.500 Sh/h, Max. Cutting force: 600 T, Betriebsstunden: 19.125 h

Bobst SP 142-E, Year 1981, Max.Size: 1.420 x 1.020 mm, Min. Size: 700 x 500 mm, Max.Speed: 6.500 Sh/h, Max. Cutting force: 600 T, Running hours: 19.125 h, Centerline, Max.Size: 1.420 x 1.020 mm, Min.Size: 700 x 500 mm, Max.Speed: 6.500 Sh/h, Max. Cutting force: 600 T, Betriebsstunden: 19.125 h

Bobst SP 142-E, Jahr 1989, Max.Size: 1.420 x 1.020 mm, Min.Size: 700 x 500 mm, Max.Speed: 6.500 Sh/h, Max. Cutting force: 600 T, Running hours: 55,500 h, Centerline, Max.Size: 1.420 x 1.020 mm, Min.Size: 700 x 500 mm, Max.Speed: 6.500 Sh/h, Max. Cutting force: 600 T, Betriebsstunden: 55.500 h

Manufacturer: Bobst Model: SP 130-ER II Type of Machine: Die Cutting Machine Year of Manufacture: 1997 Technical Specifications: - Sheet Size: 130 x 92 cm - Running Speed: Max. 7200 Sheets/Hour - Condition: Machine to be delivered in running condition - Productivity Sheets on the Machine: approximately 550 million sheets Main Components and Function: - Machine: Platform, removable platform on cylinder for feeder, recent asynchronous main motor, machine raised 650mm - Feeder: Manual non-stop feeder pallet, pile tray with manual lateral correction during production, suction unit with multiple adjustments, head feeder auto-adjustment with bottom pile - Feed Table: Double sheet detection, sheet down-holder guiding the sheets to the front guides, upper frame with manual lifting device, upper transport equipment for paper and cardboard - Platen Press: Complete shaping (cutting, pr ...

Maximum sheet format: 1420 x 1020 mm Minimum sheet format: 700 x 500 mm Maximum cutting force: 600 t Gripper margin: 18 – 22 mm Maximum output: 6000 sheets/hour Processable materials: Cardboard 100 – 1000 g/m² Corrugated board: F, E, B, C, F/F, F/E, F/B, E/E, E/B - Flatbed die-cutter with stripping station, inter-sheet inserter, and pre-stacking device, operator platform - 1 x Preparation table for external tool setup - 6 x Frames for stripping forms - 6 x Chase frames for cutting dies - 6 x Setup trolleys

Bobst Easyfeeder GT, BJ. 2006 Pre-inserts for folding carton gluers, Format area: max. 1100 x 600 mm, min: 100 x 90 mm, Standard, pneumatic cut, supports, max. 800g/m² & E-flute, pneumatic alignment shield for feeders, cleaned, tested.

- Assembly for B and E-waves, - Year of manufacture 2000, - Working width 1,400 mm, but already produced also 1,440 mm, - Accessory units: glue foamer (cold glue), page counter, spray bar bridge (water), tearing thread and reinforcement tape, - Hydraulic power unit new (Oct 24), Scope of delivery:, - Splicer, - Stow cart, - Rails and trolleys, - climbing band, - Conveyor bridge, - Catwalk / Ladder, - Line art dancer, - Water spray / water spray, - vacuum pump, - Vacuum blower, - Vacuum pump for investors, - Module Facer MF 250, - Cassette deck, - switch cabinet, - Command Console, - Preheater / A 600, - Tandem preheaterI, - Train station, - Slitter, - adhesive work, - Rail edge control, - Digging belt 5 m, - Standoff/Angle Shelf, - catwalk platform, - Jetty bridge, - Crosscut shear (reversing knife), - switch cabinet, - Command Console, - Control console berthing, - Single-press line, -  ...

Size: 1300 x 920 mm Equipments: Maximum die-cutting size with front waste: 1,300 x 905 mm Maximum die-cutting size without front waste: 1,300 x 915 mm Maximum embossing size: 1,300 x 900 mm Paper: approximately 80–90 g/qm2 and above Solid board: up to approximately 2,000 g/qm2 Corrugated board: up to approximately 4 mm Equipment: Operating platform Machine raised by approximately 650 mm Removable platform section at the feeder Recently installed asynchronous main motor Manual non-stop feeder pallet Pile table with manual lateral correction during production Adjustable suction unit Automatic feeder-head adjustment Double-sheet detection Sheet down-holder for guiding sheets to the front lays Upper frame with manual lifting device Upper transport equipment for paper and cardboard Die-cutting, pressing/creasing and embossing, separately or simultaneously Oil conditioner for maintaining the ...

Reference ID PP-61911 Category Flatbed Die Cutter Manufacturer Bobst Model SP 102 E II Year Built 2000 Color - Impression - Working Hours 63000 Speed - - Max. size 720x120 mm Min. size 350x400 mm Condition Good Location Europe Availability Immediately Machine Description Feed Table, Die-Cutting Section, Stripping Section, Delivery with Non-Stop Rack, Centerline System, BOBST Electronic System, Standard Equipment Die-Cutting: Upper Chase E-001; Lower Cutting Plate E-004 (4 mm); Lower Support Plate with adjustable centering. Stripping: Upper Stripping Frame F-002 with tooling F-021/F-022; Quick Locking Device F-076; Lower Stripping Frame F-008 with tooling F-081. B-007 Standard-height platform without pile changer (1) E-001 Upper chase, screw-fixed (4) E-002 Removable upper chase (1) E-005 Compensation plate 3 mm (1) E-055 Adjustable centerin ...

Bobst SP 142-CER – Flatbed die cutter with blanking Year: 1990 Max. sheet size: 1,020 × 1,420 mm; Min.: 700 × 500 mm Speed: up to 8,000 sheets/h Max. cutting force: 550 t Recorded operating hours: 21,834 h Equipment: Automatic sheet feeder Die-cutting and creasing station Stripping station Automatic blanking Reference: PP-60899 Further information on request.

Bobst SP 142 CER MATIC – Flatbed die cutter with blanking Year: 1990 Max. sheet size: 1,020 × 1,420 mm; Min.: 700 × 500 mm Equipment: Automatic sheet feeder and lateral BOBST Centerline system Die-cutting, creasing, stripping and automatic blanking Automatic non-stop delivery and waste extraction Operator platforms and quick cutting-frame change BOBST factory retrofit with upgraded controls and safety equipment Reference: PP-60850 Further information on request.

Bobst Flexo 1600 / SPO 1600 – Flexo printing and die-cutting package Year: 1985 Printing units: 2 Package comprising Bobst Flexo 1600 and Bobst SPO 1600. Condition: Both machines have already been dismantled. Reference: PP-57058 Further information on request.

Asitrade / Bobst 1650 – Inline double-wall laminating line Year: 1995 / 2016–2018 Working width: 1,650 mm; double-wall configuration Flutes: E, B, F, C; operator side: left Asitrade components from 1995; Bobst additions from 2016–2018 Equipment: Asitrade single facer and Bobst Modul Facer MF 260 Roll stands and splicers; Spiess feeder for printed top sheets Asitrade litho laminator; Bobst Triplo J 13 second gluing station Bobst QBK cut-off and Copar system Pressure belt, flip-flop unit and non-stop high-pile delivery Reference: PP-51501 Further information on request.

Bobst / Iberica TR-105 F – Flatbed die cutter Year: 2003 Max. sheet size: 750 × 1,050 mm; Min.: 350 × 400 mm Speed: up to 9,000 sheets/h Corrugated board thickness: up to 3 mm Non-stop arrangement with belt. Reference: PP-56295 Further information on request.

Bobst Domino 90 Matic – Folder gluer Year: 1987 Max. format: 800 × 900 mm Material weight: up to 600 g/m² Equipment: Straight-line and crash-lock bottom Left-hand lower disc gluing unit Renewed HHS cold-glue system with applicator heads Bobst Easyfeeder 90 Belts replaced in 2025 Reference: PP-53236 Further information on request.

Bobst Flexo 200 – 5-colour flexo printing machine Year: 1988 Printing units: 5 Max. sheet size: 1,270 × 2,030 mm; Min.: 550 × 650 mm Anilox rollers: units 1–4 with 160 lines/cm; unit 5 with 100 lines/cm Equipment: Vacuum feeder with pneumatic pressure plate Ceramic anilox rollers with metal doctor blades Vacuum sheet transport upgraded in 2007 Sheet cleaning and DUO-TECHNIK hot-air drying Reference: PP-52915 Further information on request.

Bobst Flexo 200 – 6-colour flexo printing machine Year: 1995 Colour configuration: 5+1 Max. feeder size: 900 × 2,200 mm Max. print area: 900 × 2,100 mm; min.: 300 × 700 mm Anilox rollers: outside diameter 679 mm, length 2,100 mm Printing-cylinder circumference: 1,542 mm Reference: PP-42700 Further information on request.

Reference ID PP-62514 Category Flatbed Die Cutter Manufacturer Bobst Model SP 102-BMA Year Built 1987 Color - Impression - Working Hours - Speed - - Max. size 720 × 1,020 mm Min. size 350 × 400 mm Condition Good Location Europe Availability Immediately Machine Description Machine type: Automatic hot-foil stamping, embossing and carton converting Press Maximum sheet size: 1,020 × 720 mm Minimum sheet size: 400 × 350 mm Maximum hot-foil stamping / embossing area: 1,010 × 680 mm Maximum cutting die full size: 1,040 × 725 mm Maximum die-cutting size with gripper margin: 1,020 × 705 mm Maximum die-cutting size without gripper margin: 1,020 × 720 mm

Number Of Colours: 8 // Printing Width: 820 mm

4-color format: 1300 mm<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

6 color size 800 mm<br><br><br>Still in operation: Yes<br>Available: immediately

7 color<br><br><br>Still in operation: Yes<br>Available: immediately

8 color size 1270 mm<br><br><br><br>

3-color R23501/15 HOLWEG flexo printing machine model: Colorado age: 1971 available: short dated 3 printing units printing width: max. 100 cm Secare – reel rewinder Available: nach Absprache

Central printing press cylinder Print width 1270 mm Roller width 600-1310 mm Processing 1000 mm Winding 1000 mm

Qty. 1 Second-hand die cutter with flexo printing press Mfc.: M&M Mediterránea de Maquinaria Type: WRC 98 1150-1600/DISTENCO Built: 1999 Flexo printing press with 3 colours Capacity: 50,000 boxes in 1 shift Input material: cardboard of max. dimensions: 1,150 mm x 1,600 mm Output material: boxes (for pizza) Included in the scope: approximately 15 tools for different sizes of boxes New electronics The complete die cutter with flexo printer will require approximately loading on 2 trucks. The box production process is as follows: Ready-made cardboard formats are inserted into the machine, the machine prints up to 3 colours, cuts the box and sends it on with a conveyor and stacks it.

Printing Width: 1250 mm // Web Width: 1300 mm

Size: Max: 1.700 x 1.150 mm min: 520 x 600 mm Equipments: Vacuum Feeder Vacuum Dust Cleaner No 4 Flexo-Printing Units Bottom Printing With Ceramic Rolls & Chamber Doctor Blade Side track printing Units Electric Running Register Automatic Stacker Max. Sheet Size 1.700 x 1.150 mm Min. Sheet Size 520 x 600 mm Max. Speed 9.000 Sheets per Hour