bison accessories for machine tools used for sale

Revolving Center MK - 5 with changeble points

Tube spice MK 5 125-200 mm NEW

New jaws for bison lathe chucks, and face plates

Plan disc Bison New in original packaging

Key data: 800

1 set of jaws for flat disc 4305- 800 mm NEW

Self-centering 4 jaw lining NEW Bearings: 315 mm type 3704 400 mm type 3704 400 mm type 3744-11

Key data: 500

Flat disc Bison 500 mm direct opname 55027-6 1 klauw heeft een lichte kras, verder als nieuw !

Three-jaw chuck, 3-jaw chuck -Type: OM200-ZJ -Chuck size: O 200 mm -Passage: O 56 mm -Admission thread: M60 x 5.5 mm -Weight: 19.8 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 54 mm -Rezess: Ø 159 mm -Hole circle: 176 mm -Weight: 14.2 kg

Wire brush round, round grinding brush, braid round brush, grinding wheel, cup wheel -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 25 mm -Number: 3x discs available -Price: per piece -Weight: 1 kg

Clamping table, clamping angle, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Round table with three-jaw chuck -Chuck size: Ø 315 mm -Spindle bore: Ø 103/28 mm -Dimensions: 460/270/H410 mm -Weight: 123 kg

Three-jaw chuck Three-jaw lathe chuck -Mouth size: Ø 200 mm -without interchangeable jaws -Weight: 16 kg

faceplate diameter: 500 mm diameter: 500 mm hollow: . mm Cone: 138 mm flange diameter: 172 mm flange: 6 total power requirement: kW weight of the machine ca.: . t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us Morehe tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

Offer via gebr. refurbished - pipe cutting and chamfing machine Fabr. GF Type RA6 Saw was completely overhauled and tested. - Engine completely new - Gearboxes restored and new seals specifications: Pipe outer diameter 75-183mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed levels electronic 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Bosch Rexroth Linear Cylinder Machine The machine is a special production for Bosch for its own use in the production process. The machine contains: Rexroth MSK050C-0600-NN-M1-UG1-NNNN 3-Phase Synchronous PM Motor Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 - Voltage 380-480, 6 bar, 1300 kg, year of construction 2016 Condition: used The plant is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Used Radial Drilling Machine DONAU Donauflex 145 Year of Make: 2006 Only a few hours of operation. • Drilling capacity in steel 45 mm • Boom travel 1,050 mm • Drilling radius min. 540 mm / max. 1,590 mm • Spindle speed 15 - 2,800 rpm • Tapping device • Tool holder MK 4 • Hydraulic clamping for boom and lifting column • Electromagnetic feed clutch • Machine light

B50 - Mech. Bending machine/reinforcing steel bending machine New / Unused Year of construction 2026 -Technical data see data sheet Dimensions LxWxH 1.4x1.3x1.5 meters / Weight 500Kg

Non-contact optical dimensional measurement X/Y measuring strokes: 200 x 100 mm, 300 x 170 mm or 400 x 200 mm depending on configuration Z measuring stroke: 150 mm Resolution: 0.1 μm Measurement system: linear encoders X/Y axis accuracy: (2.2 + 0.02L) μm Z-axis accuracy: (4.5 + 0.006L) μm Manual X/Y travel with quick release system Motorized Z-Shift with Autofocus 3 megapixel CMOS color camera 7x optical zoom with 8 positions White LED coaxial lighting White LED transmitted lighting 4-quadrant white LED ring light Reference temperature for accuracy: 20 ±1 °C Maximum load on the table: 10 to 20 kg depending on configuration Remote control of the measuring functions Computer system with screen, keyboard and CPU Auction-ID: A1-51172-124

Taken out of production while working Laser power 150Watt Including cooling machine: - Brand: National Lab - Type: FCP30.02-NEA - Serial number: 0318749 - Year of construction: 2003 - Weight: 98kg - Refrigerant: R134a - Voltage: 230V - Running current: 10A - Cooling capacity: 3000W - Power consumption: 1750W - Cooling pressure capacity: 69dB(A) - Tank volume: 33l - Pump available presure: 145-320 - Length: 700mm - Width 500mm - Height: 1110mm Auction-ID: A3-46142-13107

Consisting of a round vibrator, a round dryer and a water treatment system (type: Z300 Turbo) with centrifuge (type: Z800). Auction-ID: A1-51529-123

Small conventional shaping/slotting machine with T-slotted table and manual controls. Compact workshop machine for light shaping and slotting work. Auction-ID: A1-51153-76

Incl. threading device with control. Auction-ID: A1-51529-127

Ref. -No.: 10322 Manufacturer: EKO PILL Year of construction: 2010 Further information: The PMO 950K carousel jet washer is revolutionary maintenance-free washer, extremely compact and aesthetic structure, designed for oil contamination, machining emulsions and loose chips from washed objects. Despite its minimized dimensions, it works perfectly together with automated production lines for thorough washing, and optional rinsing and drying of moving parts on the internal conveyor. Short distance between station Loading and unloading facilities make it flexible. Washing, rinsing as well as drying operations take place in closed circuits, which significantly reduces costs - Gravity oil separator OGP - Fine filter EKO-PIL 20 µm - Vapor condenser with liquid regeneration - Drying heat recovery - Washing - Rinsing / Maintenance - Drying

Article: profile turning trip dog Manufacturer: Schütte Many different sizes for Schütte profile turning attachment 68AE Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

pickoff with shaft for Schutte multi spindle automatic lathe SF67, used pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: feed finger Manufacturer: Different Conventional feed finger and collets of RS-system For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: pick-off collets Manufacturer: Different For multi spindle automatic lathes, used and new Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: draw bar Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: quadrant lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: feed lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push rod Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: push lever Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: clamping tube Manufacturer: Schütte For multi spindle automatic lathes of different sizes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: tangential thread rolling heads Manufacturer: Fette T-type, different sizes available for multi spindle automatic lathes Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

VERTEX Precision Screw-Operated Machine Vise Brand: VERTEX Manufacturer: Vertex Machinery Works Co., Ltd. Country of Origin: Taiwan Condition: Used Application: Precision Milling, Grinding and Machining Auction-ID: A1-51153-90

Article: pickoff with shaft Manufacturer: Schütte pickoff with shaft for Schutte multi spindle automatic lathe SF67 pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S holder B73GF1S1 Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

polygon turning unit for Schutte AG20, used 1 polygon turning unit type Saco SC 15.22.001-Nr.3 1 cardan shaft type Saco SC 15.52.188.00 1 gear box SC 15.22.001-Nr. 3 Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Transmission belts, drive belt, flat belt, leather belt, belt, transmission belt FROM leather, fabric, rubber, plastic direct from the manufacturer! All dimensions and qualities according to your possible! We customize for you and look forward to your inquiry!

Convolute (excerpt) from different tools - see picture

Pneumotec Workpiece Accumulator PWS 100 Year of construction: 06/2013 Plate diameter 220 mm Number of plates: 20 pieces Height 1200 mm +/-100 mm adjustable Width 780mm Length 3150mm

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

Universal plan and boring head ISO - 50 recording

3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Touches 3-points Steady Ø 800 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg

0: 5.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 50 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 4 x 180 kg Mixing ratio: . 0 fertility: . 0 4x 180 KG The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 4 x 204 l Mixing ratio: . 0 fertility: . 0 4x 180 KG The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Radius grinding device for DECKEL S11 grinding machine – ISOG ref: 2601X00

max. load: . kg 0: . 0 weight: . kg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us Morehe tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forwar ...

weight: . kg taper MK: .. Different jaw sizes and makes. Price information is not possible without a visit. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle cut-off device Schaublin 102 - Type F. Mint condition, never used, with traces of storage.

Quick-release drilling device for milling machine, drilling machine. Drilling barrel diameter 5 mm. DIN 6348 - size 0.

Set of 5 multi-spindle heads from the Swiss brand Pibomulti. Incomplete, lack of clamps and nuts for tightening the bits.

Wooden box of individually wrapped clamps with plastic film. The accuracy class is 0.008 mm. ER20: 12 clamps with diameter 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

Wooden box of individually wrapped clamps with plastic film. The accuracy class is 0.008 mm. ER25: 15 clamps with diameter 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16

Wooden box of individually wrapped clamps with plastic film. The accuracy class is 0.008 mm. ER30: 18 clamps with diameter 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20

0: 15.000 kg height: 790 - 1350 mm width: 1200 mm weight: 65.0 kg Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 60 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

type: -- mm tool adaptor: - weight: - kg centre height: -- mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SECO-epb EasyShrink 20 ist ein Induktiv-Schrumpfgerät für hochpräzise Anwendungen, mit hoher Genauigkeit und Zuverlässigkeit. Arbeitskapazitäten nicht angegeben. Technische Daten: 50 Hz, 3x 400 V; Gesamtleistung 10 kVA; Maschinengewicht ca. 52 kg. Zubehör nicht angegeben. Erreicht enge Toleranzen; geeignet für Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luftfahrt und Medizin. Technische Daten ohne Gewähr

KELCH i-Tec XL ist ein Werkzeug-Vorreinstellgerät mit hoher Präzision, großer Genauigkeit und Zuverlässigkeit. Betriebsdaten (Durchmesser, Module, Längen, Verfahrwege) sind nicht angegeben; Maße und Gewicht liegen vor. Technische Daten: Anschluss 50 Hz 3x: 400 Volt; installierte Leistung 11 kW; Maschinengewicht ca. 250 kg; Abmessungen L900 × B600 × H1600 mm. Keine spezifischen Zubehörangaben. Ermöglicht enge Toleranzen; typische Anwendungsbereiche: Automobilindustrie, Uhrenindustrie, Maschinenbau, Luft- und Raumfahrt, Medizintechnik. Technische Daten ohne Gewähr

max. load: ca. 240.000 N 0: 270x150x140 mm weight: 16 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. load: 240.000 N 0: 220x150x95 mm weight: 11,5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. load: 200.000 N 0: 275x120x75 0 weight: 12 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. load: 120.000 N 0: 210x110x100 mm weight: 6,5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. load: ca. 30.000 N 0: 205x100x55 mm weight: 4 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. load: ca. 200.000 N 0: 250x130x115 mm weight: 10 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. load: 120.000 N 0: 178x120x75 mm weight: 5,5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. load: ca. 90.000 N 0: 190x100x65 0 weight: 3,5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. load: 90.000 N 0: 175x105x55 mm weight: 4 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. load: ca. 90.000 N 0: 190x100x65 mm weight: 3,7 kg thread: M 16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. load: 90.000 N 0: 168x105x80 mm weight: 3,3 kg thread: M16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. load: 240.000 N 0: 270x150x140 mm weight: 16 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

consisting of cutters, solid carbide cutters and drills

• consisting of four parts • in various sizes • incl. matching tool case

Additional technical specifications: • Number of holes: approx. 1800 • Hole diameter: 16 mm • Accessories: incl. various construction accessories such as clamps

Consisting of various welding wires, including SG ALMg 3; for thicknesses, weights, manufacturers, and types, see pictures.

FILTRATION D’HUILE COMAT 1F14 DQ V1.4 LSX3 CARACTERISTIQUES TECHNIQUES : Fabricant : COMAT Modèle : 1F14 DQ V1.4 LSX3 Année de fabrication : 2011 Type : Installation de superfiltration d’huile de coupe Fluide : Huile de coupe entière Débit nominal : 180 [L/min] Finesse de filtration : 3 à 5 [?m] Surface filtrante : 4,4 [m²] Système de filtration : Filtration avec adjuvant Adjuvant de filtration : Cellulose / minéral Pression d’air comprimé : 6 [bar] Alimentation électrique : 400 [V] Fréquence : 50 [Hz] Tension auxiliaire : 24 [V] AC Puissance maximale : 5 [kW] Poids : 800 [kg] Possibilité d’expédition dans toute la France ainsi qu’à l'international. Plus de photos et détails sur demande. Descriptif technique à titre indicatif, sans engagement de notre part.

Batch of tool holders partly equipped with tools, approx. 25 pcs., stored on shelf transport trolleys

Batch of tool holders partly equipped with tools, approx. 25 pcs., stored on tool pallet

Batch of tool holders partly equipped with tools, approx. 60 pcs., stored on shelf transport trolleys