alzmetall milling machines wood used for sale

bore capacity in steel (diameter): 32 mm throat: 290 mm bore stroke: 180 mm total power requirement: 1,9 kW weight of the machine ca.: t dimensions of the machine ca.: m Description to follow! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): mm throat: 290 mm bore stroke: 180 mm total power requirement: 1,9 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 345 mm bore stroke: 180 mm spindle turning speed range: 25-640 U/min column diameter: 180 mm table-size: Ø ca. 560 mm surface area: Ø 445 mm feeds: 0,1, 0,2, 0,3 mm/U spindle taper MT: 4 weight of the machine ca.: 1 t dimensions: ca. 650 x 1000 x 2100 mm with thread cutting device foot switch With coolant device in the base steplessly variable speeds, 2 gear stages, and 2 motor speeds The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel St 60: 30 mm bore capacity in cast iron GG 20: 30 mm Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle-table min.: 132 / 724 mm feed: von Hand spindle turning speed - stepless: 225 - 4300 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : M 24 : M 30 spindle turning speed - stepless: 160-2250 U/min : MK 3 spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm : 515x360 mm distance spindle /table: min./max. 117/701 mm : 2 x 14 x 224 mm feed: 0,1 + 0,2 mm/U Machine height: 1840 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 180 mm turning speeds: 55-1450 U/min Feed: 0,1-0,3 mm/U keyless drill chuck: machine.: Nummer 5112 table surface area: 620x470 mm spindle taper metric: 4 thread cutting attachment: The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoT ...

: 23 mm threading in St 60: M14 threading in GG 20: M16 : MK 2 spindle stroke: 100 mm : 225-4.300 U/min. throat: 250 mm column diameter: 90 mm : 370x300 mm : 2x14x160 mm distance spindle /table: min./max. 140/670 mm : Handkurbel feed: von Hand weight of the machine ca.: 180 kg Standard equipment: 7 TFT LCD display with touch function: Manual input of spindle speed setpoint, speed display actual value, integrated drilling depth display with touch function. setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drilling depth scale in the display, machine status status indicators and warnings on the display, Service information, Selectable operator language operator language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 12 threads/min (thread cutting capacity depends on spindle speed), thread depth adjus ...

bore capacity in steel (diameter): 40 mm throat: 345 mm bore stroke: 220 mm tool adaptor: MK 4 machine weight ab.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 34 mm : 40 mm : 40 mm threading in St 60: M 24 threading in GG 20: M 30 : MK 4 : 100-1.800 U/min. throat: 300 mm : 615x430 mm : 2 x 14 x 224 mm : 138/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,2-0,3-0,4 mm/U total power requirement: 1,4/2,2 kW Machine height: 1865 mm Standard equipment: 7 TFT LCD display with touch function: manual input of spindle speed Setpoint, actual speed display, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU - Thread cutting device, for thread cutting with stop, max. 6th Thread / min (thread cutting performance dependent on spindle speed), thread depth adjustable via depth stop and in the TFT - LCD display (4 tools) - Infinitely variable speed s ...

bore capacity in steel St 60: 30 mm bore capacity in cast iron GG 20: 30 mm Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle-table min.: 132 / 724 mm feed: von Hand spindle turning speed - stepless: 100 - 1.800 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 50 mm bore capacity in cast iron: 56 mm : 50 mm : M 30 : M36 : MK 4 throat: 300 mm : 615x430 mm : 70-4000 U/min. : 2x14x224 mm Distance spindle/table max.: 147/688 mm column diameter: 145 mm spindle stroke: 160 mm feeds: 0,1-0,4 mm/U height of the machine: 1885 mm drive motor: 1,8/2,9 kW weight of the machine ca.: 530 kg Standard equipment: - Electromagnetic feed clutch with overload protection and electrical Cross Handle Switches - Control and light transformer - Main switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Clockwise rotation by contactor control - Speed adjustment stepless - Speed display digital - Speed setting electrically - Protection IP 54 - Motor insulation class F - Spindle protection with electrical protection Pos. 12 LED machine lamp with radially adjustable light beam, supply voltage 24 Volt, protection class IP 65 Pos. 20.1 T ...

: 30 mm : M 16 : M 20 : MK 3 : 225 - 4300 U/min. spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm : 514 x 360 mm : 2 x 14 x 224 mm : 132 / 724 mm feed: Hand 0: stufenlos total power requirement: 1,0 / 1,6 kW Standard equipment: - Motor protection switch - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection - Speed display digital - Connector (fully assembled, cable length 2 m) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 12 mm : M12 mm : 30 mm : M 16 : M 20 : MK 3 : 225 - 4300 U/min. spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm : 514 x 360 mm : 2 x 14 x 224 mm : 132 / 724 mm feed: Hand 0: stufenlos total power requirement: 1,0 / 1,6 kW weight of the machine ca.: 260 kg Standard equipment: - Motor protection switch - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection - Speed display digital - Connector (fully assembled, cable length 2 m) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : M 24 : M 30 spindle turning speed - stepless: 160-2.250 U/min : MK 3 spindle stroke: 120 mm throat: 293 mm column diameter: 115 mm : 515x360 mm distance spindle /table: min./max. 117/701 mm : 2 x 14 x 224 mm feed: 0,1 + 0,2 mm/U Machine height: 1840 mm weight: 270 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 bore stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 132/724 mm feed: Hand spindle turning speed range: 225-4300 UpM height of the machine: 1790 mm total power requirement: 1,0/1,6 kW Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30.0 mm throat: 293 mm bore stroke: 140 mm morse taper: 3 MK table:: 515 x 360 mm turning speeds: 225 - 4300 U/min engine output: 1.0 / 1.6 kW column diameter: 115 mm distance spindle /table: 132 / 724 mm weight: 260 kg Machine height: 1790 mm Features: - Lockable main switch - Mushroom push button for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor with thermal protection contact - Stepless speed adjustment - Digital speed display - Protection class IP 54 - Motor insulation class F” (155°) - Connection cable (without plug, cable length 2 m) - Spindle guard with electrical protection - DD textured paint finish in signal white RAL9003, PANTONE 7545c, black The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mm y-travel: 600 mm z-travel: 800 mm Control: Heidenhain type: TNC 426 table surface area: 1250x630 mm workpiece weight: 1000 kg Tool changer: 24 spindle taper ISO: 40 turning speeds: 30-8000 U/min total power requirement: kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 4,2x3,3x3,15 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data  ...

x-travel: 1200 mm y-travel: 600 mm z-travel: 800 mm Control: Heidenhain type: TNC 426 table surface area: 1250x630 mm workpiece weight: 1000 kg Tool changer: 24 spindle taper ISO: 40 turning speeds: 30-8000 U/min total power requirement: kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 4,2x3,3x3,15 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data  ...

bore capacity in steel (diameter): 50.0 mm throat: 300 mm bore stroke: 160 mm threading: M 30 turning speeds: 100 - 1600 U/min table:: 615 x 430 mm bore spindles - Morse Taper: 4 Kurzspindel MK column diameter: 145 mm feed: 0.1-0.2-0.3-0.4 mm/U distance spindle /table: 147 / 688 mm engine output: 1.8 / 2.9 kW weight: 450 kg Machine height: 1865 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed rates 0.1-0.2-0.3-0.4 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate - Motor 1.8 / 2.9 KW - 100 - 1600 rpm. Special accessories included: - LED machine light pos. 12. - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device A pos. 24. (Coolant base plate, complete) - digital drilling depth display pos. 37.1 (5-digit LED dis ...

bore capacity in steel (diameter): 55.0 mm threading: M 30 / M 42 throat: 300 mm bore stroke: 140 mm turning speeds: 70 - 1200 U/min table:: 615 x 430 mm bore spindles - Morse Taper: 4 Kurzspindel MK column diameter: 145 mm feed: 0.10 + 0.30 mm/U distance spindle /table: 150 / 735 mm weight: 380 kg Machine height: 1850 mm Furnishing : - automatic feed - Feed device 0.1 + 0.3 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 (Thread cutting with stop) - LED machine light pos. 12. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 23.0 mm throat: 250 mm bore stroke: 100 mm morse taper: 2 MK table:: 370 x 300 mm turning speeds: 225 - 4300 U/min column diameter: 90.0 mm distance spindle /table: 140 / 670 mm engine output: 0.6 / 0.95 kW weight: 175 kg Machine height: 1770 mm Furnishing : - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Connection plug (fully assembled, cable length 2m) - Spindle protection with electrical fuse - Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40.0 mm throat: 293 mm bore stroke: 120 mm morse taper: 3 MK table:: 515 x 360 mm turning speeds: 160 - 2250 U/min column diameter: 115 mm feed: 0.10 + 0.20 mm/U distance spindle /table: 117 / 701 mm total power requirement: 1.45 / 1.90 kW weight: 285 kg range L-W-H: 500 x 800 x 1840 mm Furnishing: - autom. Feed 0.10 + 0.20 mm / rev - stepless speed adjustment - Short spindle MK 3 - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Digital speed display - Feed overload protection - Spindle protection with electrical fuse - 2 m cable with plug 16A - Operating instructions in German including special equipment: - Coolant device B pos. 25. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 60.0 mm threading: M 42 throat: 350 mm bore stroke: 200 mm turning speeds: 60 - 1530 U/min table:: 720 x 510 mm bore spindles - Morse Taper: 4 Kurzspindel MK column diameter: 200 mm feed: 0.15-0.2-0.3-0.36 mm/U distance spindle /table: 159 / 884 mm engine output: 3.6 / 4.3 kW weight: 605 kg Machine height: 1950 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 - LED machine light pos. 12. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...

Homag Flex-5 Router aggregate (P-Up aggregate) Manufacturer: Homag Teile-Nr. : 2-056-10-3402 Baujahr: 2016 Aggregat-Nr.: BID-003421 Zeich.-Nr.: 000HA042003277

Homag dual-side horizontal dril- router aggregate Manufacturer: Homag Type: 000W4206247 Year: M-Nr.: 1-017-95-0880 4-1619 Nmax: 15.000 /min

Homag 2-side horizontal drill – router aggregate (slothole aggregate) Manufacturer: Homag (Benz) Type: 000WZ042003012 Year: M-Nr.: 2-056-10-3380 4-42654 Nmax: 14.000 /min

Homag saw aggregate Manufacturer: Homag Typ: 000W04206041 Year: 2000 M-Nr.: 4-02078 2-056-10-307 Nmax: 9.900 /min Condition: Goed

HSK63 Mounting Device Condition: Good

Hydraulic Unit Weinig 1

Hydraulic aggregate Weinig 2

DIETEL Length stopper system with fine tuning Type: Left 4.0 Length: 4,0 meter (nett) 4,2 meter (gross) Measuring: rough and fine setting rough and fine setting: absolute and incremental Power: 3.8 Volts battery Accuracy: 0.1 mm Display: LCD Inklusive: Stopper with arm ( to push product till saw/tools) Condition: functioneel gecontroleerd

CATALOGUE NO. 6943 TECHNICAL SPECIFICATIONS - loading hopper inlet 1600x1500mm - rotor working width 1500mm - main engine 45kW - pump motor 5,5kW - number of knives 44pcs - knife size 50x50mm - sieve 59mm - pressure drawer - autorewers - dimensions length / width / height 3430x2800x2850mm - weight about 9000kg ADVANTAGES – French production - new knives put on – autorewers – pressure drawer – very good condition – used chipper Net price: 189900 PLN Net price: 42200 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

Aanvoerrol ø120-50 Algemeen

Aanvoerrol Algemeen ø120 – 60

Doorvoerrol Martin T90-T92

Throughfeed roll – thicknesser Suitable for Martin T42, T43, T44 and T45

Throughfee rolls Martin T42, T43, T44 en T45 thicknesser

Throughfeed roll Martin T41 thicknesser

Aigner Afstandhouder Abstandhalter Spreader

Aigner Bovenfrees

Aigner Bovenfreesaanslag voor de volgende maten: As ø30 As ø35 As ø40 As ø50

Aigner Centrex frees beveiliging

Aigner Intergral Freesaanslag In de volgende maten verkrijgbaar Intergralaanslag 500/500mm Intergralaanslag 500/650mm Intergralaanslag 650/500mm Intergralaanslag 650/650mm

Aigner Onderstip

Aigner Tafelverlenging

Aigner Vulstaaf

Aigner Bevestigingsrail met volgende lengtes 250mm 330mm 430mm 530mm 830mm

Aigner Bevestigingsstandaard Befestigungssäule Mounting Post

Aigner Geleidewielen Führungsrollen Guide wheels

Hebor H50 Stelklok Tot op 0,1 mm nauwkeuring

Aigner Quickly

Aigner Supporting rail Supporting rail Tragschiene

Aigner Veiligheidsrollen Protecting wheel Sicherheitsrolle

Aigner Zaagboy SawBoy Sägeboy

Suvamatic draadkabel 400mm Draadkabel 400mm voor gewichtsvermindering

Suvamatic draadkabel 1100mm Draadkabel 1100mm voor schaafasbeveiliging

Suvamatic Drukschoen

Suvamatic Gasveer

Suvamatic Greep

Suvamatic invoersysteem

Suvamatic Kabeltrommel gewichtsvermindering (Zonder draad)

Suvamatic Kabeltrommel voor schaafasbeveiliging (Zonder draad)

Suvamatic meeneemsysteem

Suvamatic Rollen

Suvamatic safeguard joint

Suvamatic Jointer safeguard/ surface planer safeguard 340 to 515 mm working width

Suvamatic Jointer safeguard / surface planer safeguard 340 tot 755 mm working width

Suvamatic Jointer safeguard / surface planer safeguard 340 tot 755 mm working width

Cutter head for roofbeam profiling (Rafter construction/rafter roof)

Hackeranlage Rudnick Enners 650/200 Motor 37kw vibrorinen Metaldetector kratzforder Containerbefillen

A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible.

20-75- CNC with tool changer WOODLAND MACHINERY (new) Type SX1325A-12 Useful working area axis X-Y-Z 2850-2100-150 mm Shaft, air cooled, 9.0kw 24000 rpm. Servo motor Control system LNC Drive gear High precision automatic positioning cylinder Work table vacuum plate Vacuum pump 7.5 kw Maximum speed 60 m/min Maximum working speed 15-20m/min Flexible towing cable (with screen) Air components BLCH Voltage 380V/50HZ Transport dimensions 3200x2100x1800mm Weight 3100 kg The price is 24500 Eur

Wood Chipper, Wood shredder 18 KW Opening 600 x 800mm

Type Record 121 Number of working axes 3+ Useful working area axis X-Y-Z 2600-1080-250 mm Table dimensions 2600 x 1080mm Spindle speed 900 - 18000 rpm Number of milling spindles: 1 Tool change positions: 12 Tool clamping system HSK63F Work table Matrix table The main engine is 7.5 kw Vacuum pump performance 250/300 m3/h Vacuum motor 6.5 kw The diameter of the extraction socket is 150 mm Air pressure 7 bar Voltage 380V/50HZ Transport dimensions 3700x3200x2600mm Weight 3500 kg The price is 15500 Eur

Horizontal chipper Horacle / machine no.: H2156/62HO - Feed width: 620mm - Max. feed height: 140mm - Vibrating trough length: 5m - Power: 28 kW - Rated voltage: 400V - Rated current: 55A - Control voltage: 230V - Fuse : 63A - Frequency: 50Hz

900 mm sanding machine for turned products. GENINI mod. LAR90 - Maximum working length 900 mm. - Automatic loader

DMC 3-belt calibrating sander mod. USK1350 M3 - CE standard - 1 steel roller - 2 rubber rollers - 3 rubber rollers - N. 3 independent motors - Working width 1350mm - With shoes (short pieces device) - Blower on the third group - On/off device on each group - Touch screen control - Matr. SA/005006 - Year 2004 - CE compliant

COMEVA horizontal belt sander mod. LC180

CAMAM longitudinal sander mod. LOL/75/RU

CNT orbital sander mod. LOR 150 - CE compliant - Matr. 17002 -Diam. Min. max. machinable 10-45 mm.ù - Hp3 engine - Year 2017

CAMAM orbital sander mod. LEC250 – CE compliant - With feeds - Matr. 11 - Year 1996 - Working dimensions min/max. 30/150 mm. - Min. radius of curvature mm. 250

A Reichenbacher CNC multi-spindle woodworking center with automatic support table and vacuum pins is available. Traverse path X1/X2: 8540mm, traverse path Y1: 2500mm, traverse path Z1: 480mm, swivel B: 180°, swivel C: 360°, X3 axis: underfloor drilling unit, U2-U10: carrier movement 1-9 (gantry), axis speed X/Y/Z: 60m/60m/20m/min, turning speed B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9. Workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9, suction plates per carrier: 8, suction plate diameter: 100mm, carrier positioning: +/-1000mm, min. carrier distance: 300mm, total vacuum pump number: 72, vacuum pump stroke: 100mm, vacuum pump useful stroke: 25mm, tool positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Total system dimensio ...

Hundegger K2i 625 well-maintained year of manufacture end of 2008 fully automatic carpentry machine, feed and loading cross conveyor, under-table swivel cross-cut saw 11 kw, universal milling unit - 5 axis, combined support for vertically working tools, drilling rig 2.2 kw, drilling rig swivel 2.2 kw, marking device, fully automatic beam turning station hydraulic design, transport and position setup two-hand system, electronic control, 6-arm storage table, AQF strand with shaft extension, Extension bracket with puller, zero stop for pre-elongated components, scrap wood holder on the K2 i in front of the sawing unit, splinter wood for horizontal drilling unit, vertical finger cutter 5.5 kw, longitudinal and transverse groove cutter, slitting device on both sides guide 900mm, marking device at the rear, marking and labeling device at the bottom, refined wood support surfaces, additional sc ...

Orbital sander CAMAM mod. LEC200/AV - With feeding units - Min/max diam. 10/100mm - Motor 5.5hp - Volt. 380v/50hz

A CNC dual spindle woodworking machining system Homag is available. Travel speed: 35m/80m/25m/min, C-axis: 360°, A-axis: +/-100°, Z stroke: 600mm. Workpiece length range: 2450mm/17400mm, max. workpiece width: 1900mm, max. workpiece thickness (incl. clamping devices): 300mm. Main spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, saw blade diameter: 350mm. Second spindle power: 18.5kW, speed: 24000rpm, tool holder: HSK-F63. Tool positions: 18/2x10. Total system dimensions X/Y: approx. 19000mm/6300mm, control: Homag. Including underfloor milling unit Homag, 3xtool changers, pickup position, clamping platforms, vacuum clamps, workpiece lifter, laser and additional units. Documentation available. An on site inspection is possible.