alup compressors used for sale

Flow rate m3/min: 12.90 Working pressure max bar: 8 Main motor kW: 75 Weight Kg: 1750 Overhauled: Yes Refrigeration dryer MTA - DE 140 - CE 2009 TECHNICAL DATA: Refrigeration compressed air dryer Refrigerant: R134a Refrigerant filling Kg: 2,350 Maximum pressure bar: 16 Total power KW: 3.60 Weight Kg: 293

Alup Compressor SCR 30 - Height: 125cm - Width: 125cm - Depth: 75cm - Weight: 600kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Bilopzitsev Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Separation system oil, water Separation system for compressors condensate 2 x Automatic water separator 230 V

Compressor

Cooling: air-cooled Control: Hot Gas Valve Control: Digital display Condensate separation: lossless, Level-controlled steam trap Performance data Nominal capacity at pressure dew point +3°C 0.6 m³/min Max. operating pressure 16 bar Total energy consumption (25°C input temperature) 0.16 kW Refrigerant R513A 0.17 kg Installation data Ambient conditions min. / max. 5 / 43 °C Pressure drop at full load 0.25 bar Voltage / Frequency 230 / 50 V / Hz Dimensions and weight Length x width x height 350 x 493 x 450 mm Weight 19 kg Compressed air connection G 3/4 "ag

Air dryer ALUP 16/30 bar 230 V 16 A R 134a Unchecked

Air Compressor Screw compressor Manufacturer: Alup Article: SCK 76-08 / SO Volume flow: 9.37 m³/h Motor power: 55.0 KW Completely NEW with all accessories Slight transport damage to the sheet metal, see pictures. Condition : New

Environmental protection. Improved separation. Also separates stable emulsions. Meets the strictest purity requirements. Highly efficient. Equipment in detail Maintenance indicator Easy maintenance Filtration Polypropylene for free oil particles Activated carbon for unstable emulsions Organoton for stable emulsions Efficiency with activated carbon Max. oil content at outlet 10mg/l Efficiency with Organoton Max. oil content at outlet 5mg/l Technical data Max. compressed air output (medium climate) without dryer & filter 6.3 m³/min Max. compressed air output (medium climate) with dryer & filter 3 m³/min Condensation Tube 2 x 1/2" Water drain 2 x 1/2 " Condensate inlet temperature min. / max. 0 / 60 °C Dimensions and weight Length x width x height 390 x 278 x 428 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Curb weight approx. 5.8. kg ...

Galvanized compressed air tank Material: Hot-dip galvanized steel Version: upright Fittings: Safety valve, pressure gauge, Ball valve, test valve Installation data Capacity compressed air tank 270 lt Permissible operating pressure max. 11 bar Operating temperature min. / max. -10 / +80 °C Blow-off capacity safety valve 7.24 m³/min Dimensions and weight Diameter 500 mm Height incl. feet 1685 mm Weight approx. 66 kg Compressed air connection 4 x 3/4 "

For sale is a robust and reliable industrial refrigeration dryer from the German quality manufacturer ALUP Kompressoren (model Oekodry DT 260). The device effectively removes moisture from the compressed air and thus protects downstream tools and machines. Technical data (according to nameplate): Manufacturer: ALUP-Kompressoren GmbH Model / Type: Oekodry DT 260 Year of Make: 1998 Permissible operating pressure compressed air: max. 16 bar Permissible compressed air temperature: max. 60 °C Operating voltage: 230 V (1 phase / 50 Hz, normal Schuko plug) Nominal consumption: 0.67 kW Refrigerant: R 134a (0.750 kg capacity) Equipment: Integrated automatic steam trap at the bottom of the front Condition & Use: Visually normal workshop condition with usual signs of use. Compact design, is currently ready for transport on pallet.

Removes oil from your compressor condensate, The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away., The separator was built in 2021, weighs 6.8 kg empty and is compact enough to sit next to the compressor., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/alup-ows-18-oil-water-separator/, Type: Oil-water separator for compressor condensate, Filtration: Oil filter and activated carbon filter, Weight: 6.8 kg (empty)

Screw compressor Alup Allegro14 Inverter integrated 15 kW 13 bar 2.26 m3/min Year of Make: 2021 Operating hours: 11.334h

With the help of our rental machines, you can bridge the time periods during which there is an increased demand for compressed air. This is useful, for example, in the event of unexpected peaks in demand or the failure of one of your own compressors. The usual high BOGE quality standards also apply to our used rental machines – in addition to various compressors, a wide range of high-performance compressed air components is available for you. Before renting, all machines are carefully reworked and tested – we give you a guarantee for this. Visit the BOGE compressors Used Machinery Shop

Air compressor, make CompAir, type: D75HSR-10W, 75 kW, built-in compressors 2S4 and 2S7, volume flow 11.9 m³/min, 10 bar, intake pressure 1 bar, 3700 rpm, YOC 2009

Key data: 3

Volume flow 300 (50 Hz) / 360 (60 Hz). m³/h Pressure difference approx. +240 to +260 mbar (50 Hz). Engine power 3.0 kW (50 Hz) / 3.6 kW (60 Hz). Speed approx. 2850 (50 Hz) / 3370 (60 Hz). Current consumption (50 Hz) 15.9 A () / 9.20 A (Y). Degree of protection IP55 (standard, see type protection). Voltage 200 - 480 V Weight 53 kg

MTA Chiller with the following specifications: Type: MTA PNP 280 Power: 611 kW Year of manufacture: 2009 Weight: 5.5 Ton 2x Bitzers Includes refrigerant coolant (R134)/gas.

Sale of BOGE Ecoline screw compressors at the following special prices: BL S 18 eco - 7,5bar 400V 50Hz L 18,5kW €4.350,00 BL S 22 eco - 7,5bar 400V 50Hz L 22kW €5.060,00 BL S 22 eco T - 7,5bar 400V 50Hz L22kW €5.250,00 BL S 22 eco - 10bar 400V 50Hz L 22kW €5.060,00 BL S 22 eco T - 10bar 400V 50Hz L22kW €5.250,00 BL S 30 eco - 7,5bar 400V 50Hz L 30kW €5.900,00 BL S 30 eco T - 7,5bar 400V 50Hz L30kW €6.060,00 BL S 30 eco - 10bar 400V 50Hz L 30kW €5.900,00 BL S 30 eco T - 10bar 400V 50Hz L30kW €6.060,00 Warranty: 6 months from the date of invoice Image: Catalogue image. Queries will be answered during normal working hours from Mon-Fri. answered See also our homepage boge under Used Machines.

Used air compressor. Condition: - Used machine - Has not been operated for years; needs inspection before use Auction-ID: A7-50988-141

Various compressor units from Thomas, Gast, and Jiayu industrial. See photos for type/model. Auction-ID: A1-50936-45

Type: Towable Air Compressor Manufacturer: Ingersoll Rand Model: P130WD Year: 1999 Serial number: SCZP130W DXY313497 (plate) Engine power: approx. 30.5 kW Working pressure: 7–8.6 bar (plate) Gross mass / Towable weight: approx. 780 kg (plate) Operating hours: approx. 1,689 h (hour meter shown) Fuel type: Diesel Emission stage: older / pre-2000 standard Remarks: Towable compressor unit suitable for rental/backup or refurbishment; parts and service available for Ingersoll Rand; condition unchecked Auction-ID: A1-50932-115