alup compressed air dryers used for sale

For sale is a robust and reliable industrial refrigeration dryer from the German quality manufacturer ALUP Kompressoren (model Oekodry DT 260). The device effectively removes moisture from the compressed air and thus protects downstream tools and machines. Technical data (according to nameplate): Manufacturer: ALUP-Kompressoren GmbH Model / Type: Oekodry DT 260 Year of Make: 1998 Permissible operating pressure compressed air: max. 16 bar Permissible compressed air temperature: max. 60 °C Operating voltage: 230 V (1 phase / 50 Hz, normal Schuko plug) Nominal consumption: 0.67 kW Refrigerant: R 134a (0.750 kg capacity) Equipment: Integrated automatic steam trap at the bottom of the front Condition & Use: Visually normal workshop condition with usual signs of use. Compact design, is currently ready for transport on pallet.

Galvanized compressed air tank Material: Hot-dip galvanized steel Version: upright Fittings: Safety valve, pressure gauge, Ball valve, test valve Installation data Capacity compressed air tank 270 lt Permissible operating pressure max. 11 bar Operating temperature min. / max. -10 / +80 °C Blow-off capacity safety valve 7.24 m³/min Dimensions and weight Diameter 500 mm Height incl. feet 1685 mm Weight approx. 66 kg Compressed air connection 4 x 3/4 "

Steam traps without pressure losses! In the production of of compressed air, water always falls into the form of of condensate. If this condensate is not reliably separated, the condensate can in the compressed air network and damage to the consumers. Performance data Application for compressors up to 6.3 m³/min Application for filters up to 63 m³/min Operating pressure min. / max. 0.2 / 16 bar Capacity discharge 3 l/h Installation data Operating voltage (without el. Connection cable) 230 V Power consumption 10 W IP65 protection class Dimensions and weight Length x width x height 160 x 69 x 116 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Weight approx. 0.9 kg

Air Compressor Screw compressor Manufacturer: Alup Article: SCK 76-08 / SO Volume flow: 9.37 m³/h Motor power: 55.0 KW Completely NEW with all accessories Slight transport damage to the sheet metal, see pictures. Condition : New

Alup Compressor SCR 30 - Height: 125cm - Width: 125cm - Depth: 75cm - Weight: 600kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Bilopzitsev Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Flow rate m3/min: 12.90 Working pressure max bar: 8 Main motor kW: 75 Weight Kg: 1750 Overhauled: Yes Refrigeration dryer MTA - DE 140 - CE 2009 TECHNICAL DATA: Refrigeration compressed air dryer Refrigerant: R134a Refrigerant filling Kg: 2,350 Maximum pressure bar: 16 Total power KW: 3.60 Weight Kg: 293

Separation system oil, water Separation system for compressors condensate 2 x Automatic water separator 230 V

Air dryer ALUP 16/30 bar 230 V 16 A R 134a Unchecked

Compressor

Key data: 2 , 10

m

Key data: 7 , 10 , 1

Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor with belt drive Control: fixed speed Control: Airlogic² T touchscreen full-color display Refrigeration Dryer: Integrated Performance data Volume flow at operating pressure 9.5 bar 1.15 m³/min Operating pressure min. / max. 5.5 / 10 bar Total power consumption at 9.5 bar / full load 10.0 kW Rated power motor; IP55 7.5 kW Oil quantity 3.7 lt Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1188 m³/h Free fan pressure 30 Pa Sound level 65 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Dimensions and weight Length x width x height 1625 x 665 x 1535 mm Weight 355 kg Compressed air outlet G 3/4 "ig Capacity compressed air tank 270 lt

Cooling: air-cooled Control: Hot Gas Valve Control: Digital display Condensate separation: lossless, Level-controlled steam trap Performance data Nominal capacity at pressure dew point +3°C 0.6 m³/min Max. operating pressure 16 bar Total energy consumption (25°C input temperature) 0.16 kW Refrigerant R513A 0.17 kg Installation data Ambient conditions min. / max. 5 / 43 °C Pressure drop at full load 0.25 bar Voltage / Frequency 230 / 50 V / Hz Dimensions and weight Length x width x height 350 x 493 x 450 mm Weight 19 kg Compressed air connection G 3/4 "ag

Environmental protection. Improved separation. Also separates stable emulsions. Meets the strictest purity requirements. Highly efficient. Equipment in detail Maintenance indicator Easy maintenance Filtration Polypropylene for free oil particles Activated carbon for unstable emulsions Organoton for stable emulsions Efficiency with activated carbon Max. oil content at outlet 10mg/l Efficiency with Organoton Max. oil content at outlet 5mg/l Technical data Max. compressed air output (medium climate) without dryer & filter 6.3 m³/min Max. compressed air output (medium climate) with dryer & filter 3 m³/min Condensation Tube 2 x 1/2" Water drain 2 x 1/2 " Condensate inlet temperature min. / max. 0 / 60 °C Dimensions and weight Length x width x height 390 x 278 x 428 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Curb weight approx. 5.8. kg ...

Key data: 2 , 10

New AGRE Alup screw compressor with filter unit (technically oil-free), for the operation of milking robots. IMMEDIATELY AVAILABLE from the Hengsberg warehouse in Styria! We are also happy to take care of the delivery and commissioning of the compressor and ongoing maintenance of existing compressors of the brands AGRE, Alup and Atlas Copco. Drive: Efficient IE3 motor with belt drive Control: Infologic² Connect Refrigeration dryer and 270 litre container integrated Includes filtration for technically oil-free operation Performance data Volume flow at operating pressure 9.5 bar: 0.29 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 3.7 kW Rated power motor: 2.2 kW Pressure dew point refrigeration dryer : approx. +3 °C Dimensions and weight Length x width x height 1540 x 600 x 1350 mm Weight 205 kg Compressed a ...

Key data: 5 , 10

Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: Speed-controlled with frequency converter Control: Infologic² Connect Refrigeration Dryer: Integrated Filtration optionally available Performance data Volume flow at operating pressure 7.0 bar 0.33 - 0.75 m³/min Operating pressure min. / max. 4.0 / 10.0 bar Total power consumption at 9.5 bar / full load 7.7 kW Rated power motor; IP55 5.5 kW Oil volume 3.2 lt Pressure dew point refrigeration dryer approx. +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1140 m³/h Free fan pressure 30 Pa Sound level 61 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.19 kW Dimensions and weight Length x width x height 1540 x 600 x 1375 mm Weight 230 kg Compressed air outlet 1/2 "  ...

Key data: 7 , 10 , 1

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight Length x width ...

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dr ...

Key data: 4 , 8

Oil-free scroll compressor Compaction: Spiral compactor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Simple start/stop control Refrigeration Dryer: Integrated, Refrigerant R513A Electric condensate drain included Performance data Volume flow at operating pressure 6.75 bar 0.4 m³/min Operating pressure min. / max. 4.0 / 7.75 bar Total power consumption at 6.75 bar / full load 4.4 kW Rated power motor; IP55 3.7 kW Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 0 / 40 °C ∆ T above cooling medium temperature 0 °C Cooling air requirement 900 m³/h Free fan pressure 30 Pa Sound level 57 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer internally wired Dimensions and weight Length x width x height 1,275 x 690 x 1,450 mm Weigh ...

Maximum removal of impurities. Increased quality of the final product. Extended service life of the operating process. High reliability. Low pressure loss. Service-friendly. Tested according to applicable ISO standards. Filter package Replace filter G85 1/2" residual oil 0.3 mg/m³ after 2000 hours Replace filter C85 1/2" residual oil 0.01 mg/m³ after 2000 hours Replace filter V85 1/2" residual oil 0.003 mg/m³ after 1000 hours Residual oil after filter package 0.003 mg/m³ = technically oil-free + Wall bracket + Connection kit Filter G Equipment in detail Drain: Automatic float drain valve Performance data Nominal capacity 1.42 m³/min Application: Oil Aerosol Oil aerosol concentration in the outlet 0.3 mg/m³ Total mass efficiency >99.25 % Quality class of air at the outlet (oil) 3 according to ISO 8573-1:2010 Pressure loss dry 55 mbar Pressure loss wet 125 m ...

Removes oil from your compressor condensate, The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away., The separator was built in 2021, weighs 6.8 kg empty and is compact enough to sit next to the compressor., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/alup-ows-18-oil-water-separator/, Type: Oil-water separator for compressor condensate, Filtration: Oil filter and activated carbon filter, Weight: 6.8 kg (empty)

Screw compressor Alup Allegro14 Inverter integrated 15 kW 13 bar 2.26 m3/min Year of Make: 2021 Operating hours: 11.334h

ELKOMAK ERD 312 Compressed air dryer 312m3/h Bj 2013,

Nominal volume electricity: 1008 m3/h, refrigerant: R407C, compressed air PS: 14bar; for more details see photos of nameplate Pick-up only possible from December! Auction-ID: A7-50677-933

Type: horizontal compressed air tank / tank Model shown: EURO20 Capacity: 270 liters Maximum permissible pressure (PS): 11 bar Minimum temperature: -20 °C Maximum temperature: +50 °C Year of manufacture: 2002 Marking: CE 0060 Reference/visible number: 9460/378 (plate reading) Installation: horizontal tank on legs Visible equipment: fittings, hose and taps Condition: pre-owned, traces of use, visible dirt and scratches. Auction-ID: A3-46133-35234

Used compressed air container storage facility, in top condition Compressed air system fully installed in a 20 ft steel container, 2 x Boge VLEX screw compressors with 65 KW (overhauled a year ago, new screw elements, engines newly stored, new shooter and completely new compressor control, with overarching control. Delivery quantity at maximum maximum maximum press 10 bar 2 x 9 m ³/min, free to control with 2 x 9 m ³ or together 18 m ³/min. In addition, in the container is a built-in container with 500 lite, a cyclone separator, Beko cold dryer type. RA, and compressed air filter 2 fold, Mirco filter and activated carbon filter, condensate treatment is done via an oil water separator. The too and exhaust air are discharged via ventilation ducts, and can be sealed with electrically motor locking flaps. Container includes 4 electric heaters (thermostat controlled), and an electric sub ...

Specifications: - Operating pressure 16 bar - Inlet capacity up to 1100 m³/h - Refrigerant R 134 A - Drive 400 V / 2.95 kW - Space requirement approx. W 1550 x H 2200 x D 860 mm - Weight approx. 280 kg

OKS Stationary Air Pressure Vessel Galvanized 1 piece 2000 liters 1 piece 1000 liters Test pressure 16 bar, operating pressure max. 11 bar at call Tel. 01715213204

Compressed air tank up to 11 bar, volume 500L

Capacity 8 bar. Auction-ID: A1-50076-1060

Auction-ID: A1-50076-531

Auction-ID: A1-50076-1042

Powerful vacuum cleaner for dust, smoke, chips Suction power 7.58 m³ / min Vacuum 520 mbar Air requirement 3.25 m³ / min Suction nozzle NW 76 mm Suction hose 5.5 m Collection tank 60 litres HEPA Safety Filter Cartridge 2.2m² - Dust Class H Space requirement L - 1,100 x W - 680 x H - 2,200 mm Weight approx. 130 kg

With cabinets Auction-ID: A1-50608-47

Compressed air tank 15 m³, operating pressure 4 bar

Compressed air tank 5.3 m³, operating pressure 7 bar

Ingersoll Rand TS3A Compressed Air Refrigeration Dryer 12 bar For sale is a used, professional compressed air refrigeration dryer from the manufacturer Ingersoll Rand – model TS3A, built in 2008. Technical features: Max Air Pressure: 175 psig (12 bar) Max. Air Inlet Temperature: 60 °C (140 °F) Cooling System: Air-cooled Operating Voltage: 400V/3Ph/50Hz Refrigerant: R404A (3.36 lbs / 1520 g) Refrigerant Oil Type: ISO 32 Polyol Ester (POE) Power consumption: 4.8 kW Weight: 230 kg Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

Senco pneumatic clamping device, pliers clamper, stapler Top condition, as good as new unused, is sold as used

Mäder DLP 1700 HV Direct Acting Air Press Press Direct-acting air presses are used wherever the compressive force is required constantly over a longer distance or where a large immersion depth is required: e.g. when pressing pins, bushings and ball bearings or when forming. DLP 1700 HV Direct-acting compressed air press Compressive force at 6 bar: 17 kN Working Stroke: H mm: 40/60/80 More items - new and used - can be found in our shop! International shipping costs on request!

Operating hours 58730 h Technical data: Max. compressed air: 14 bar Ambient temperature, max.: 50°C Refrigerant: R410A, 0.86 kg Connection: 230 V Weight, approx.: 154 kg

- Manufacturer: Lohenner, Germany - Material: Steel - Surfaces: Fully galvanized Dimensions: - Diameter: 1150mm - Length : 2140mm - Height, with supports: 1300mm - Test certificates, ASIT/SVTI/TüV : All available - In very good condition

Oil-free wisAIR air compressor including refrigerated air dryer and air filter. Air compressor: - Max. working pressure: 13 bar - Capacity: 146.5 l/s - Motor power: 55 kW Stationary, single-stage screw compressor with water injection, driven by a speed-controlled electric motor. The compressor is enclosed in a soundproof housing. Condensate is drained automatically., Additional title: Oil-free screw compressor with refrigeration dryer and compressed air filter, Capacity: 8,79 m3/min, Max. working pressure: 13 bar, Motor drive: 5200 rpm, Power: 55 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 2,60 m, Width: 0,97 m, Height: 2,00 m, Weight: 1195 kg, Features: Screw compressor; Refrigeration dryer; Compressed air filter

Air compressor including compressed air dryer and oil trap with oil-water-separator. air compressor: - volume rate of flow: 8,02 m3/min - stage pressures: 13 bar g - suction pressure: 1 bar - installed motor capacity: 45 kW, Additional title: Compressor with refrigeration dryer and oil separator, Capacity: 8 m³/min, Stage pressure: 13 bar, Suction pressure: 1 bar, Drive: 4250 rpm, Power: 45 kW, Current: 97 A, Voltage: 400 V, Frequency: 50 Hz, Length: 1,80 m, Width: 0,92 m, Height: 1,80 m

Compressed air system with air compressor, refrigeration dryer, activated carbon filter and two compressed air tanks., Capacity: 202 m3/h, Operating pressure: 10 bar, Features: Air compressor; refrigeration dryer; activated carbon filter; 2 x compressed air tanks.

Ultrafilter Laserpac LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ cleaner from the premium manufacturer Ultrafilter (Donaldson) This system has been specially developed for applications that require absolutely high-purity compressed air – ideal for the operation of laser cutting systems, the pharmaceutical and food industries or electronics production. The system not only removes moisture in a 5-step process, but also cleans the compressed air extremely efficiently from oil vapors, particles and carbon dioxide (CO₂). Technical data at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow rate (at 5.5 bar g): Inlet approx. 36.3 m³/h | Discharge min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/environment ...

Ultrafilter LP 0072 Compressed Air Preparation Dryer Industrial adsorption dryer and CO₂ cleaner from the premium manufacturer Ultrafilter (Donaldson) This system has been specially developed for applications that require absolutely high-purity compressed air – ideal for the operation of laser cutting systems, the pharmaceutical and food industries or electronics production. The system not only removes moisture in a 5-step process, but also cleans the compressed air extremely efficiently from oil vapors, particles and carbon dioxide (CO₂). Technical data at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow rate (at 5.5 bar g): Inlet approx. 36.3 m³/h | Discharge min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/environment): max. ...

Ultrafilter LP 0072 Compressed Air Preparation Dryer Industrial adsorption dryer and CO₂ cleaner from the premium manufacturer Ultrafilter (Donaldson) This system has been specially developed for applications that require absolutely high-purity compressed air – ideal for the operation of laser cutting systems, the pharmaceutical and food industries or electronics production. The system not only removes moisture in a 5-step process, but also cleans the compressed air extremely efficiently from oil vapors, particles and carbon dioxide (CO₂). Technical data at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow rate (at 5.5 bar g): Inlet approx. 36.3 m³/h | Discharge min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/environment): max. ...

Various lengths and diameters. Including blue bins, Excl gitterbox Auction-ID: A1-50076-501

MOTAN LUXOR A 400-N / ADE 400 Dry Air Generator – 400 m³/h Used industrial Motan dry-air generator / desiccant dryer, suitable for central plastic granulate drying systems. Technical specifications: - Manufacturer: Motan GmbH, Germany - Model: LUXOR A 400-N - Original type: ADE 400 - Original year: 1998 - Factory No.: 4011 - Later Motan identification: 2016 - Serial No.: 768S0016137A1621499Z - Dry-air capacity: 400 m³/h - Supply voltage: 400 V / 50 Hz / 3PE - Control voltage: 24 V DC - Original connected load: 13.9 kW - Heating power: 9 kW - Rated current: 27 A - Fuse: 35 A - Compressed-air supply: 5–7 bar - Weight: approx. 550 kg - Dimensions: approx. 1,200 × 1,100 × 2,450 mm - Siemens 4 kW blower motor - Desiccant/molecular-sieve drying system - ETA-process technology - Integrated regeneration system - CE marked Auction-ID: A7-50717-4

Refrigerated compressed air dryer with external inline filter housing and connected pipework, as pictured. Nameplate specifications: - Air flow: 6,000 l/min - Electrical power: 1.43 kW - Maximum pressure: 16 bar - Power supply: 230 V, single-phase, 50 Hz - Refrigerant: R134a, 0.65 kg - Maximum inlet temperature: 45°C - Maximum ambient temperature: 40°C Auction-ID: A1-50699-12

Zephyr ZS 45PM-8 Rotary Screw Air Compressor System Containerised compressed-air system comprising a rotary screw compressor, refrigerated air dryer, compressed-air receiver, filtration, condensate treatment and connecting pipework. Manufacturer: Zephyr Model: ZS 45PM-8 Year: 2017 Serial number: ZS37-017-00227 Motor power: 45 kW Rated pressure: 8 bar(g) Variable flow: 2.1–7.2 m³/min Compressor dimensions: 1,600 × 900 × 1,270 mm Compressor weight: 810 kg Air dryer: Zephyr ZD-80 refrigerated dryer, 8.8 Nm³/min, 1.4 kW, R-407C refrigerant Air receiver: Drukov VSV, 2,000 L, maximum pressure 10 bar, test pressure 14.5 bar, weight 445 kg Configuration: Insulated equipment container with filtration, condensate treatment, piping and air-conditioning system Condition: Used Approximate dimensions: 6,000 × 2,500 × 2,900 mm Approximate weight: 3.5 t All ...

Consisting of 1x MP 2000 liter compressed air buffer tank (1998), 1x Alup ADQ462 compressed air dryer (2025), 1x Pneumatech PH230 air dryer (2025), 1x Pneumatech VT5 filter unit and 1x Bekosplit separator Auction-ID: A1-50393-43

Ingersoll Rand ThermoStar TS050 Refrigerated Compressed-Air Dryer Manufacturer: Ingersoll Rand Manufactured by: Domnick Hunter Hiross S.p.A., Italy Model: TS050 Equipment type: Refrigerated Compressed-Air Dryer Manufacturing date: 05/2001 Serial number: 2141180003 CE marked Industrial refrigerated compressed-air dryer designed for removing moisture from compressed-air systems. Technical specifications: Air pressure range: 1–12 bar Maximum inlet air temperature: 60°C Minimum ambient temperature: 5°C Climatic class: ST Electrical supply: 230 V, 1-phase, 50 Hz Power: 1.4 kW Rated current: 7.3 A Protection class: IP44 Refrigerant: R407C Refrigerant charge: 1 kg Refrigerant circuit design pressure: 19–28 barg Oil: ICI Emkarate RL22HB Weight: 66 kg Electrical diagram: NA080SEFA1 Condition: Used. All descriptions, identification, technical specifi ...

New airend BOGE BA 30 as a replacement for Termomeccanoca SCA10D (TM SCA 10 D) The installation dimensions are the same. BOGE Id.Nr.: 201021766P ( incl. gasket DN 60x D110x 2 and O-Ring-90x3-N-FKM (Viton) 75)

Absorption dryers

Stock# UG6400 Used set of air compressor by Kaeser model FSG520-2W with air dryer by Hybritec type Compact model DTI 668/902. Compressor details: Power consumption: 355 kW Water cooled. Working output pressure up to 10 bar. Flow output: 50.00 m3/min Shipping dims: 3190 mm x 2095 mm x 2125 mm x weight 5900 kg Dryer details: Hybritec Compact model DTI 668/902. air flow - up to 66.7 m3/min Working pressure 5/10 bar Power consumption: 34.5 kW

On behalf of the seller, we offer a Helios ALB 200 C EH5 outdoor air box with fan, air filter and electric heating coil. The system can be interesting, for example, for existing systems, replacement and conversion projects, for your own needs, for refurbishment or for forwarding to customers. The device was removed due to a discontinuation of operations and, according to the seller, worked perfectly until it was removed. The filters were replaced.

Power: 7,5kW (10hp), Voltage: 380V-50Hz, three-phase, Working pressure: 8 bar, Air flow rate: 1000 lt/min, Air receiver capacity: 500 lt. Auction-ID: A1-50595-11

Air receiver capacity: 200 lt, Air intake capacity: 500 lt/min, Motor power: 3 kW / 4 HP, Power supply: 400 VAC / 3 phases, Working pressure: 10 bar. Auction-ID: A1-50595-31

Air receiver capacity: 200 lt, Air intake capacity: 400 lt/min, Motor power: 2,2 kW / 3 HP, Voltage: 400 VAC / 3 phases, Working pressure: 8 bar, Air compressor pump: B3700. Auction-ID: A1-50595-9

Motor power: 5,5 HP / 4,0 kW, Power supply: 400 Vac / 50 Hz / 3 Ph, Duty cycle (run/rest %): 50/50, Starting method: Direct-on-line, Drive: V-belt driven, Belt size: A61 (1550), Flywheel diameter: 385 mm, Pulley diameter: 150 mm, Number of cylinders: 2, Number of stages: 2, Maximum pressure: 9 bar, Cut-in pressure: 7 bar, Air receiver: Yes, Air receiver capacity: 270 l, Air intake capacity: 612 lt/min, Free air delivery: 469 lt/min, Free air delivery: 28.14 m³/h, Main air connection: 1/2\", Noise level at 0 m: 74 dB(A), Noise level at 4 m: 54 dB(A), Noise level at 7 m: 49 dB(A), Oil lubrication: Yes, Air filter: Yes, Pump speed: 1184 rpm, Intercooler: Yes, Aftercooler: Yes. Auction-ID: A1-50595-23

Various pressure expansion vessels with solid steel gas filling, built in 2008, unused 2x Pneumatex Statico SU 500.6 Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 500L, 6 bar, diameter: approx. 680 mm, total height with feet: approx. 1588 mm, permissible temperature range: -10°C-120°C 4x Pneumatex Statico SG 1000.6 Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 1000L, 6 bar, diameter: approx. 850 mm, total height with feet: approx. 2189 mm, permissible temperature range: -10°C-120°C (unused) 3x Pneumatex Statico CG 3000.6 E Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 3000L, 6 bar, diameter: 1,300 mm, total height with feet: approx. 2936 mm, permissible temperature range -10°C â 120°C (unused)

TO WHOM IT MAY CONCERN; WE VE USED ATLAS COPCO SCREW AIR COMPRESSOR. MAS GA 37. AT STOCK PLS FIND SPESIFICATIONS ON BELOW MAWP. 9.1 bar. - 131psi VOLTAGE 440V 60Hz P motor 37kW 50hp 2010 YOB MADE IN. BELGIUM IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US PS: WE VE ALSO USED AIR COMPRESSOR ATLAS COPCO GA 55 AT OUR STOCK. Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Pressure air compressor, make CompAir / Geveke, type: VMHD 500, for 735 rpm, 21.5 bar, built 1985.

Pressure air compressor, make CompAir / Geveke, type: VMD 750, for 735 rpm, 8.5 bar, built 1991.

ATMOS PDS PDP 35 towable air compressor was built by ATMOS Chrást s.r.o. in the Czech Republic in 2021. The machine is used wherever top-quality compressed air is required. Its components from renowned European brands ensure the highest possible energy efficiency throughout its entire service life. The compact design based on a single-axle trailer, in turn, allows operation in all conditions, both at low and high temperatures. The ATMOS PDP 35 diesel air compressor weighs 768 kg. The machine has only been used for 350 hours and is in very good condition. At 250 operating hours a service was performed. Technical specifications of the ATMOS PDS PDP 35 rotary screw compressor - motor power: 35.7 kW - working pressure: 7 bar - maximum capacity: 5 m3/min - power source: combustion engine - operating hours: 350 h - weight of the ATMOS machine: 768 kg

TO WHOM IT MAY CONCERN; WE VE USED ATLAS COPCO SCREW AIR COMPRESSOR. GA 55 AT STOCK PLS FIND SPESIFICATIONS ON BELOW MAWP. 9,1 bar. - 131psi VOLTAGE 440V 60Hz P motor 55kW 75hp YOB 2010 IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US PS: WE VE ALSO USED AIR COMPRESSOR ATLAS COPCO MAS GA 37 AT OUR STOCK. Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

REF-2357 WORTHINGTON CREYSSENSAC ROTARY-SCREW AIR COMPRESSOR Rotary-screw air compressor. Manufacturer: Worthington Creyssensac. Brand: ROLLAIR. Model: ROLLAIR 75. Compressor: - Rated power: 55kW/75HP - Refrigerated air volume: 9,000m3/h - Sound level: ± 70dB - Weight: ± 1,400kg - Compressed air outlet Ø: 2” - Operating pressure: 12.5 bar Compressor motor: - Manufacturer: LEROY SOMER - Model: AP180LGU-T - Power: 55kW/75HP - 2,945 Rpm - 400V/100A Complete with instruction manual.

Kaeser SK26 Air compressor Serial: 2610494 Air compressor, 15Kw, 7.5Bar, rate motor speed 3000/min, 3Ph

Kaeser SK26 Air compressor Serial: 264957 Air compressor, 15Kw, 7.5Bar, 2.4M3/min, 3Ph

Kaeser SK26 Air compressor Serial: 2610493 Air compressor, 15Kw, 7.5Bar, rated motor speed 3000min, 3Ph

Ingersoll Rand D480IN-A Refrigerated air dryer 2020, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph

Ingersoll Rand D480IN-A Refrigerated air dryer 2011, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph

Fluidair RPK47 Air compressor Serial: 41449 Rotary air compressor, working pressure 100PSI, Discharge pressure 8Bar, with fluidair rotastar control, 3Ph

Capacity: 2000 l Operating pressure: 11 bar Test pressure: 16 bar Auction-ID: A7-49089-171

used compressor, 2 scroll elements 7.8 bar,

Kaeser air compressor, Additional title: Screw compressor

Auction-ID: A1-50229-84

Auction-ID: A1-50229-77

Key data: 50

Atlas Copco GA50VSD Screw air compressor in good condition.

Hydrovane HV04 air compressor Serial: 504020750 2019, 4Kw, Max Bar 11, RPM 1455, 3Ph, comes with receiver and BEKO drypoint RA dryer,

Kaeser SX3T Compressor Serial: 2266 2010, 2.2Kw, 11.0Bar, 3Ph

Auction-ID: A1-50229-66

Auction-ID: A1-50229-64

Auction-ID: A1-50229-65

Kaeser SX3T Compressor Serial: 2268 2010, 2.2Kw, 11.0Bar, 3Ph

Auction-ID: A7-50346-12

Auction-ID: A7-50270-219

Quiet-running compressor Werther Black Mamba VS. Quiet-running compressor from the technical stock of the gastroenterological practice. The contents of this lot come from a dissolved gastroenterological practice in Switzerland and have already been professionally removed and transported to a warehouse in Germany. The sale is EXW / ex warehouse Germany. Packaging, loading, transport and, if necessary, export processing are the responsibility of the buyer. The collection must take place within the specified time period. In the event of late or non-collection, additional costs may arise for storage, handling, dismantling or re-provisioning. These must be paid by the buyer before collection. For data protection reasons, individual areas, advertisements, labels or documents may have been made unrecognizable in the images. Medical devices are offered second-hand. The buyer is responsible ...

Less than 8000 hours. Auction-ID: A1-50076-572

Auction-ID: A1-50335-176

General Description Stationary industrial rotary screw air compressor manufactured by Ingersoll Rand , model M160-2S . Heavy-duty enclosed compressor designed for continuous compressed-air production in industrial and manufacturing applications. Equipped with an Ingersoll Rand Intellisys control system. :contentReference[oaicite:0]{index=0} Technical Details Manufacturer: Ingersoll Rand Model: M160-2S Machine type: Rotary screw air compressor Year: 2002 Input shaft power: 160 kW Maximum working pressure: 7.5 bar Motor speed: 1,484 rpm Power supply: 400 V, 3-phase, 50 Hz Controller: Ingersoll Rand Intellisys Enclosed industrial configuration Gross machine weight: 3,230 kg Internal pressure vessel: Rednal Pneumatics Pressure vessel year: 2002 Pressure vessel capacity: 18 L Pressure vessel maximum working pressure: 15 bar Pressure vessel test pressure: 22.5 bar Pressur ...

Auction-ID: A1-50758-17