TRANSFLUID db used machines

- Working area pipe steel  up to 30 mm x 2 mm - Pipe working area stainless steel  up to 30 mm x 1.5 mm - Pipe extension length 2,000 mm - Bending angle up to 180° + 10° overbending - Automatic bending sequence ( bending, twisting, longitudinal ) - CNC control - Input PC with software Transpro V2 + Tanspro V2 package (indication of previous owner) - Function triggering via hand switch - Clockwise bending direction - Radius range max. 125 mm mm -Auto. Mandrel lubrication - Laser scanner for security area - Incl. existing used tool for stainless steel pipe 1 mm  15, 18, 22, 28 mm Bending radius 1.5 D (various wrinkle smoothers, mandrels

Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.

tube diameter:40-90 mm wall strength:20 mm weight of the machine ca.:11 t dimensions of the machine ca.:4 x 1,6 x 1,35 m bending radius max.:270 mm This machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure va ...

Hydraulic mandrel bending machine with a lot of accessories Preselection of 8 different bending angles with digital display Digital length display as well as digital display of torsion Max. effective length: 6096 mm Round tube steel (S 235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm Max. bending angle: 180° Weight: approx. 1800 kg

- Round tube steel DM 6 – 42 x 5 mm - Round tube stainless steel DM 6 – 42 x 3 mm - Pipe push-on length max. 6,000 mm - Programmable logic controller up to 20 angles - Digital display of longitudinal displacement - Digital display of torsion - Programmable, anticipatory mandrel retraction - Mandrel lubrication system by hand pump - Wrinkle smoother receptacle - Bending speed max. 13°/sec - Bending angle up to 180° + 10° deflection - Manual feed - Manual twisting - Right bending direction - Radii from 1.5 D - Incl. bending tool : - DM 12 mm - radius 36 mm ) / DM 15 mm - radius 37.5 mm - DM 18 mm - radius 36 mm - DM 22 mm, radius 44 mm with mandrel - DM 42 mm, radius 44 mm with mandrel

tube diameter: 60 mm wall strength: 6 mm bending radius min.: 180 ° total power requirement: 5,5 kW weight of the machine ca.: 1300 kg dimensions of the machine ca.: 3500 x 1250 x 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 40-168 mm wall strength: . mm bending radius min.: ohne Rohr 190 mm Electrohydraulic: : mit electro motor: 30 kW voltage: 380 V operating pressure: 200 bar Double control pump: je. 46 l/m Pump control: 4/3 Wege Ventile Pump pressure medium: Hydrauliköl der HLP 300 ltr. : Hydraulikzyl. Rollenkette E-Control: Tastatur, Steuerung SPS total power requirement: kW weight of the machine ca.: 22 t dimensions of the machine ca.: 30 m2 m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find furth ...

tube diameter: . mm wall strength: 15 St52 und Edelstahl mm bending radius min.: 6-120 mm : : 6-42 mm Hydraulikrohre dimensions: L/B/H 2000x2000x1300 mm operating pressure: 200 bar filling amount: ca. 70 l 0: 20000 ml 0: 5,5 kW voltage: 400 V rated current: max. 16 A control: 4/3 Wege-Ventil bending angle max.: 150 ° Duty cycle: 100 % Radius range between: 2xD und 3,5 x D total power requirement: kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact  ...

Tube diameter stainless steel: bis 42 x 2,0 mm tube diameter steel: bis 42 x 3,0 mm bending angle max. +/-: 180 + 10 ° section modulus: 4,1 ccm operating pressure: 6 bar total power requirement: 5,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 6100 x 2300 x 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 4-28 mm bending radius min.: 1,5 x D - 2,0 x D mm Control: Siemens LOGO delivery rate: 4,5 l/min bending angle max. +/-: 190 ° nominal pressure: 250 bar operating pressure: 3095 bar delivery rate: 4,5 l/min total power requirement: 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 4-28 mm total power requirement: 1,5 kW weight of the machine ca.: t dimensions of the machine ca.: m - bending type: 4-28 mm - bending angle: 190° (ohne Rohr) - bending radius: 1,5 x D – 2,0 x D - nominal pressure: 250 bar - operating pressure: 3095 mm n. re. - delivery rate: 4,5 l/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending angle max. +/-: 180 + 10 ° tube: 4100 mm - Round tube steel up to 30 x 2.2 mm ² - Round tube stainless steel up to 30 x 1.5 mm - Square tubes 20 x 2.5 mm - Bending time 90 degrees: 1.5 sec (feed) - Length feed speed: 450 mm - Radius range max 125 mm - Free-standing bending head 850 mm long - Bending axis drive electrohydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending direction: clockwise, steel tube diameter: 50mm, steel tube thickness: 3mm, stainless steel tube diameter: 50mm, stainless steel tube thickness: 2mm, max. section modulus: 5cm³, bending angle: 180°+10°, max. tube length: 2000mm, max. radius range: 150mm, bending height: 1050mm, bending head length: 850mm, min. bend spacing: 400mm, nominal pressure: 250bar, operating pressure: 200bar. Machine dimensions X/Y/Z: approx. 3200mm/1400mm/1300mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

tube diameter: 6 - 28 mm wall strength: 2 mm bending radius min.: 2 x D Control: IPU 20 bending radius max.: 5,0 x D mm bending angle max.: 190 ° arbor length: 3000 mm operating pressure: 180 bar hydraulic motor: 4 kW weight of the machine ca.: 900 kg dimensions of the machine ca.: 3,8 x 1,1 x 1,3 m Condition: ready for operation: Video available on our website.: Electric 400 Volt: Bending segments: 15-20-26-28 mm Bending mandrels: 4 Operation panel: 0,5 x 0,6 x 1,03 m Double Foot pedal: Machine manual: Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi ...

8-color web width 342,6 mm 9 print clambs, 8 for water colour 1 UV glue clambs for packing-Monofolie up 30µ for printing of pressure-sensitive label material bis 200µ Ceramik-Aniloxcylinder, for 120/18 bis 140/10 140/17, 160/15, 180/12, 95/15, 200/5, 255/10, 300/10, 315/11, 345/8, 500/17 Inking roller for full-size inking with cutting for slitting etc. Still in operation: Yes Available: sofort

Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic labeller for the application of one vignette label on the upper panel of carton. Mechanical speed 400 cartons per minute

8-colours web width 342.6 mm 9 printing stations, 8 for watercolours straight toothed 1 UV (glue) station redeveloped and further expanded for printing on packaging monofilm from 30" expanded and further expanded for printing on adhesive label material up to 200 Ceramic anilox cylinder, for 120/18 to 140/10 140/17, 160/15, 180/12, 95/15, 200/5, 255/10, 300/10, 315/11, 345/8, 500/17 Colouring roller for full-surface colouring Cutting device for longitudinal sections Etc. Still in operation: Yes Available: immediately

Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.

Debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 Process control controller: yes weight: 700 kg voltage: 400 V 3/N current consumption: 63 A - With an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - Controllable cooling housing with autom. ball valve - Automatic exhaust damper - Automatic exhaust flap - Monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor.

10,000 stacking boxes SSI Schaefer 14/6 – 1 DBGM Used goods, very good condition, see photos Load capacity 40 kg Volume 71 l Net weight 4.3 kg Outer length: 650 mm Outer width: 468 mm External height: 300 mm Color: Green Material: PP Dimensionally stable and robust Stackable on top of each other Temperature deflection from -20°C to +100°C Drop handles or recessed grips on both sides no Euronorm container 28 pieces per pallet Negotiation price: € 5.50 net from stock Retail price: € 4.90 net from stock upon acceptance 1 pallet Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as p ...

travel -x axis: 2x 750 mm travel -y axis: 500 mm travel -z axis: 600 mm control: Siemens 840 D turning speeds: 30 - 6.000 U/min tool taper: SK 40 numbers of positions in the tool changer: 22 surface area: 2x (1.000 x 500) mm Dimensions (L x W x H): 4.100 x 2.300 x 2.600 mm Double-place machining center (shuttle operation) | AXA - DBZ Additional equipment: The machine comes with a 4th axis on each side processing in tack setting. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Depalletizer is used for unloading new bottles, delivered on pallets. After clamping one whole row from bottles layer by gripping head, the device delivers them to the unloading table, and the bottles are transported to the washing machine or filling machine. - Capacity up to 6 000 bottles / hr. - Operation - 1 person - Dimensions of bottles: - diameter 20 to 120 mm - height from 50 to 350 mm - Lifting height to 4m, - lifting capacity – to 40 kg - Lifting speed - 7m / min - Speed - 7 m / min - Enviroment temperature - 5 to 45 degrees C - Total power requirement - 0,8 kW - Air Pressure - 0.5 - 0.6 MPa / stable /

Dowel hole drilling machine Fabr. Scheer Model: DB5 Drilling gear with 21 spindles Swivel Spindle distance 32mm Archive image! Original pictures will follow soon or on request

Stock# U2415-1 Used stainless steel conical mixer by Hosokawa Milacron model DBXE-300R. Total volume 798 l, working volume 300 l. Mixer has top mounted stainless steel unsupported mixing screw, driven via gearbox and el. motor 2.2 kW. Rotating arm is designed in carbon steel and is driven via gearbox and el motor 0.18 kW. Bottom central discharge via outlet with diameter 200 mm and manually operated slide valve. Machine is mounted on three carbon steel legs and is equipped with local control panel. Last time machine had been working in food industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.