TECHNICA zsm used machines

Maximum length of the piece: 1100 mm, Minimum length of the piece: 50 mm, Maximum diameter of the piece: 125 mm, Minimum diameter of the piece: 8 mm, Center height of tailstock above guide: 145 mm, Center height of tailstock above carriage: 65 mm, Centering hole taper angle: 60°, Larger diameter of centering hole cone: 50 mm, Diameter of smallest centering hole: 2 mm, Grinding spindle speeds: 45000 / 22 500 / 13 000 rpm, Hollow screw speed: 400 rpm, Stroke of the grinding wheel along the grinding surface: 0.75 - 5 mm, Diameter of grinding wheels: 15, 27, 48 mm, Weight approx.: 460 kg, Dimensions (length x width x height): 850 x 750 x 1850 mm

workpiece diameter: 8-125 mm grinding depth: 130 mm clamping length: 50-1100 mm max. workpiece diameter: 0 mm min. workpiece diameter: 0 mm workpiece length: mm total power requirement: 1 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _______________________________________________________ Distance between centres 50 – 1,100 mm Height of centres 145 mm Workpiece Ø 8 – 125 mm Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice 4 – 150 mm Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø  ...

center hole: 2-50 mm workpiece diameter: 8-125 mm workpiece length - min.: 50 mm workpiece length - max.: 1000 mm column - center height: 145 mm grinding wheel speeds:: number: 3 from/to: 13000-45000 U/min spindle turning speed range: 400 U/min dimensions of the machine ca.: 750x850x1800 mm weight of the machine ca.: 475 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: - mm grinding depth: - mm clamping length: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hole diameter maximum: 0 mm Grinding wheel diameter: 0 mm Workpiece height maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Max. work piece diameter: 220 mm Workpiece length min.: 50 mm Workpiece length max.: 1570 mm Min. work-piece diameter: 8 mm Table load max.: 120 kg Angle of the centre hole: 60 ° Taper in centre hole min.: 1 mm max: 60 mm Grinding spindle diameter: 32 mm Grinding spindle speeds with: abrasive wheel 15 mm: 45000 rpm abrasive wheel 27 mm: 22500 rpm abrasive wheel 48 mm: 13000 rpm Motor capacity: grinding spindle: 0.25 kW planetary stroke: 0.12 kW Max. grinding head traverse: 160 mm Voltage: 400 Volt Machine´s weight about: 500 kg Overall dimensions machine: Length: 1120 mm Width: 1070 mm Height: 1950 mm

1 center grinding machine Make: Technica Model: 5100-810 Year of construction: 1988 Workpiece diameter: 150 mm Grinding depth: 5.0 mm Workpiece length: 1,100 mm Grinding spindle speed: 45,000 rpm Operating voltage: 380 V Total power requirement: 0.5 kW Machine weight approx.: 490 kg Dimensions approx.: 1,00 x 0,85 x 1,85 m

Year 1999 Tonnage: 180 T Tray dimensions: 1020 x 1600 mm Max mould height: 2000 mm Max mould width: 1200 mm Min mould thickness: 840 mm Max mold opening stroke: 895 mm Screw diameter: 120 mm L/D ratio: 28 Maximum extrudable weight in PE: 19000 Gr Maximum injectable volume: 25 liters Number of parison regulation points: 100 Die Min/max diameter: 190/450

bore capacity in steel (diameter): 3 - 5 mm throat: 150 mm bore stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Various Special purpose drilling machines The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extraction system, central extraction, room air filter system ETS Efficient Technical Solutions GmbHZentral welding fume extractionYear of construction approx. 2005Volume flow approx. 5000 m³/hExtraction connection at the filter inlet 1200 x 150 mmExhaust air connection at the filter outlet 400 x 300 mmEngine power 10 kWNet connection 400 Volt, 50 Hz - Control cabinet for wall mounting- Bag filter- Maintenance flap for filter change- Centrifugal fan on top of the systemSpace requirement L x W x H 2000 x 1650 x 3650 mmTransport height without Fan 3100 mmWeight

workpiece diameter: mm grinding depth: mm clamping length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Voltage 50 Hz 3x: 380 Volt Power: 1.83 A Overall dimensions machine: Length: 2000 mm Width: 1000 mm Height: 800 mm

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 170 mm Wheel diameter: 350 mm Technical data Table length: 275 mm Table width: 110 mm Grinding height: 170 mm Execution: hydraulic Diameter of grinding wheel: 350 mm Width of the grinding wheel: 12 mm Voltage 50 Hz 3x: 380 Volt Various accessories: Magnetic plate: Length: 240 mm Width: 125 mm Dust extraction

Workpiece weight maximum: 0 kg Drum diameter: 0 mm Technical data Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1200 mm

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Technical data Spindle speeds: up to: 15000 rpm Machine´s weight about: 300 kg Overall dimensions machine: Length: 800 mm Width: 700 mm Height: 1700 mm Various accessories: Lamp

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 275 mm Table width: 110 mm Max. distance from table to spindle-centreline: 170 mm Grinding wheel speeds: up to: 2800 rpm Diameter of grinding wheel: 175 mm Width of the grinding wheel: 13 mm Drilling cap. of grind.wheel: 32 mm Grinding spindle motor: 0.7 HP Machine´s weight about: 560 kg Overall dimensions machine: Length: 1300 mm Width: 1000 mm Height: 1700 mm Various accessories: Magnetic plate: Length: 240 mm Width: 125 mm Dust extraction

Technical data Number of working units: 2 Voltage 50 Hz 3x: 380 Volt Various accessories: Dividing attachment

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 200 mm Table width: 110 mm Grinding height: 170 mm Execution: hydraulic Rapid traverse: Diameter of grinding wheel: 175 mm Width of the grinding wheel: 12 mm Voltage 50 Hz 3x: 380 Volt Various accessories: Magnetic plate: Length: 200 mm Width: 100 mm Dust extraction Lamp

Technical data Units: vertical: 1 Units: horizontal: 1 Way longitudinal slide: up to: 70 mm Working way: up to: 60 mm Swivelling range: 4 x 90 ° Work-piece clamping: with collet: EX 20 Working capacity: Boring diameter from: 0.15 mm up to: 8 mm Voltage 50 Hz 3x: 380 Volt Table drive: 0.4 kW Machine´s weight about: 750 kg Overall dimensions machine: Length: 1200 mm Width: 1120 mm Height: 1600 mm

Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible

workpiece diameter: 125 mm grinding depth: 50 mm clamping length: 2000 mm total power requirement: 0,5 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _______________________________________________________ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm Max.weight of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head ...

Three Illig punching machines are available for the precise punching of thermoformed plastic parts from film material. Working width: approx. 900mm, working height: approx. 120mm, roller diameter: approx. 196mm, machine dimensions X/Y/Z: approx. 2500mm/1300mm/1600mm, weight: approx. 750kg. Including two hydraulic punching machines Wolf EHPT 6E and two manual swivel arm punching machines. On-site inspection is possible.

A cylinder roll punching machine Adolf Illig is available. Pass-through width: approx. 850mm, pass-through height: approx. 120mm, roll diameter: approx. 190mm, table dimensions X/Y/Z: 2x approx. 1200mm/1200mm, working height: approx. 800mm, machine dimensions X/Y/Z: approx. 2700mm/1350mm/1550mm, weight: approx. 900kg. An on-site inspection is possible.

thread dia.: 20 - 80 mm grinding length: 3500 mm thread pitch: . mm threading lenght min./max.: 50/3500 mm centre height: 400 mm workpiece length - max.: 4000 mm control: Siemens 840-Dsl feed speed u-axis: 0 - 2500 mm/min feed speed w-axis: 0 - 2500 mm/min feed speed b-axis: 100 1/min total power requirement: 45 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 10,7 x 4,6 x 2,9 m Thread Grinding Machine / Profile Grinding Machine, suitable for: - the thread grinding of single and multi-start ball screws with gothic profiles and special profiles - Ø 20 to 80 mm with a grinding wheel Ø of 350 to 500 mm - length between the centers up to max. 4000 mm Equipment / Accessories: - grinding spindle: - capacity 14 kW - with a grinding wheel diameter range of 350-500 mm, cutting speeds between 20 and 75 m/s can be set. - grinding wheels: - diameter new 500 mm - diameter  ...

R25972/18 GUSCHKY Spiral sleeve winding system Model: Built: Availability: instantly Wrapper: Manufacturer: Guschky Technical data: Area inner diameter 20-100mm Area wall thickness 4.5mm Maximum belt speed 50 m/min Engine power approx. 10 kW Voltage 220V Three-phase current 50 Hz Air pressure 6 bar -------------------- pneum. Saw: Manufacturer: Guschky Built: 1990 Technical data: Area inner diameter 20-100 Area wall thickness 4.5mm Sleeve length 400 - 6100 mm --------------------- unwinder and glue station Manufacturer: Gasser Built: 1986 Technical data: Gluing Diving Process Number of paper webs 8 + 1 separate deck Available: immediately

Manufacturer: LUKAS / JAWES OF LIVE New device with warranty for cutting cables, car parts, usable in recycling Cutting device LSI 200 Mouth width: 125 mm Weight: 13.8 kg Lukas cable shears Hydraulic cable shear for the mobile use. New machine The type LS/ 200 can be used very good to handle with heavy cable. Because of its excellent shear forces it saves much time. Its low weight makes it possible to work economically. The unique Lukas Star Grip valves makes it easy to use. The cutter blades can be resharpened. This makes a long service life. Operating pressure: 50 MPa Shear forces: up to 270 kN Width of mouth: up to 125 mm Dimensions: l/w/h 680 x 190 x 163 mm Weight: 13.8 kg. Hydraulic power system Operating pressure: 50 MPa Oil tank: 9l Output: low pressure 4.4 l/min high pressure 1.4 l/min Power: 1.5kW with 3000 min-l /230 V Dimensions: l/w/h 372 x 312  ...