STEINEL sh used machines

Key data: 300 mm, 150 mm, 250 mm

Hello, We hereby offer you a used universal/vertical milling machine, type SH 4 D, from the manufacturer Steinel. Manufacturer: Steinel Model SH 4 D with vertical milling head FRP 3 Machine No. 8160 Travels X-Y-Z axis X = 300mm, Y = 150 mm. Z = 250mm. Table dimensions 740 x 200 mm Clamping surface 620 × 130 mm Spindle speed 32 – 1250 rpm Feed stages 0.2 / 0.32 / 0.5 / 0.63 / 1 / 1.6 mm/min Quill stroke / drilling spindle stroke 100 mm Power main motor 1.5 kW Weight approx. 800 kg Dimensions approx. 1,100 × 1,300 × 1,600 mm Conventional control Note: The aforementioned technical data have been taken from the operating instructions, brochures of the manufacturer or other sources, for which we cannot assume any liability for the correctness and completeness. Scope of delivery: 1 piece used Universal/Vertical Milling Machine, Steinel, Type SH 4 D Area of ap ...

Stand drilling machine in row arrangement, used Gang drilling machine, used Type: BT 6.52 Manufacturer / make: Steinel Built/ new in: 1978 Drilling capacity / drilling capacity: 6 mm in St 60 Spindle cone/ spindle taper: MK 1 Drilling spindle discharge / distance center drill spindle to column: 204 mm Drilling stroke/ way of spindle: 90 mm Table clamping area/ table size: 800 x 390 mm Column diameter/ diam. of coulmn: 60 mm Drilling spindle speeds / speeds of drilling spindle: 1400 / 2800 / 5600 per min/ per minute Total connection value / rated power: 0.25 kW each => 1 kW Weight / weight: approx. 0.4 t

Weighing fraes machine STEINEL SH5, table 700 / 200 mm, table lashing adjustment pneumatic

We offer several machine pallets for Steinel and Heller machines!

Multi-spindle drilling machine from Bernhard Steinel - Machine Tool Factory Schwenningen/Neckar ran reliably until the end The machine is equipped with a foot pressure switch from Festo a drive motor from Bauknecht and a control box from Siemens Pneumatic lines should be checked/repaired before The machine can be viewed at any time. Transport via freight forwarder can be arranged at short notice -feel free to take a look at the other advertisements or visit us directly at Gerstenstraße 2, 17034 NB The price is net plus 19% VAT If you have any further questions, please call or write. Maschinenhandel Nord new & used machines for industry, trade and commerce

Two Steinel BZ20 milling machines are available. Travel X/Y/Z: 560mm/450mm/450mm, speed: 7000rpm, feed: 10000mm/min, tool holder: ISO30, tool positions: 40, rotary table diameter: 270mm, rotary table swivel range: 0°-24°, max. workpiece weight: 6kg. Control: Siemens System 8, weight: approx. 12000kg. Spare parts carrier.

Horizontal machining centre with 2-fold change table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 MFabr. No. 34 Year of construction 1988Travel range X: 500 mm, Y: 400 mm, Z: 320 mmClamping surface, table surface 500 x 400 mmTool holder ISO 40Spindle speed max. 6300 rpm. infinitely variableMain spindle drive 12 kWNet connection 380 Volt, 50 Hz, 30 kVA- Tool changer with 24 tool positions- Changing table with 2 stations- Interface for data transfer- Coolant device with chip conveyorSpace requirement L x W x

Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine, vertical milling machine -Manufacturer: Steinel, vertical milling machine type SV 4 -Clamping table: 740 x 200 mm -Cross table: 620 x 130 mm -Travel: X/Y/Z 340/100/300 mm -Spindle holder: MK2 -Speed: 112 - 2240 rpm right/left rotation -Feed: 0.10 - 0.71 mm/min -Quill stroke: 100 mm -Coolant system -Dimensions: 1000/950/H1830 mm -Weight: 650 kg

Key data: 500 mm, 1000 mm, 2500 1/min

Lathe Voest Alpine Steinel WNC 500 S x 1000 Turning diameter 500 mm Turning length: 1000 mm Control system Sinumerik 810 T-GA 2 2 stage gearbox i = 4 Power: 37 KW at 100% ED Max. torque during turning: 1450 Nm Tailstock manual with clamping and coupling Speed max 2500 rpm Electronic handwheel For milling: Hydraulically swivelling servo motor with 720 Nm and max. 18.5 rpm 12-speed disc turret with driven tools max. 3000 rpm at 4 kw Tool holder VDI 40 Many VDI 40 tool holders for internal and external machining as well as driven tools, incl. some tools - e.g. internal turning steels otherwise without tools!

Lathe Voest Alpine Steinel WNC 500 S x 1000 Turning diameter 500 mm Turning length: 1000 mm Control system Sinumerik 810 T-GA 2 2 stage gearbox i = 4 Power: 37 KW at 100% ED Max. torque during turning: 1450 Nm Tailstock manual with clamping and coupling Speed max 2500 rpm Electronic handwheel For milling: Hydraulically swivelling servo motor with 720 Nm and max. 18.5 rpm 12-speed disc turret with driven tools max. 3000 rpm at 4 kw Tool holder VDI 40 Many VDI 40 tool holders for internal and external machining as well as driven tools, incl. some tools - e.g. internal turning steels otherwise without tools!

x-travel: 560 mm y-travel: 450 mm z-travel: 450 mm rotary table dia.: 270 mm rotary table tiltable: 0 - 24 ° spindle taper ISO: 30 spindle turning speed range: 31,5 - 7100 U/min feed speeds: 1 - 10.000 mm/min control: SINUMERIK System 8 no. of tools in magazin: 40 wotkpiece diameter with 2 vacant positions: 100 mm workpiece length: 255 mm weight of tools max.: 6 kg total power requirement: 32 kW weight of the machine ca.: 11,6 t dimensions of the machine ca.: m = 5 axis machining centre Accessories: various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 6 mm throat: 204 mm bore stroke: 90 mm distance table - lower edge spindle: -265 mm Column diameter: 60 mm spindle turning speed range: 700 - 5600 U/min total power requirement: 0,43 kW weight of the machine ca.: 73 Kg dimensions of the machine ca.: TBH 0,63 x 0,37 x 0,72 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 6 mm throat: 204 mm bore stroke: 90 mm distance table - lower edge spindle: -265 mm Column diameter: 60 mm spindle turning speed range: 700 - 5600 U/min total power requirement: 0,43 kW weight of the machine ca.: 73 Kg dimensions of the machine ca.: TBH 0,63 x 0,37 x 0,72 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 6 mm throat: 204 mm bore stroke: 90 mm distance table - lower edge spindle: -265 mm Column diameter: 60 mm spindle turning speed range: 700 - 5600 U/min total power requirement: 0,43 kW weight of the machine ca.: 73 Kg dimensions of the machine ca.: TBH 0,63 x 0,37 x 0,72 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle bore: 42 mm Circumferential diameter over bed: 330 mm Multifix holder Tailstock with an MK3 lining Speed: 1-4500 1/min

Spindle bore: 42 mm Circumferential diameter over bed: 330 mm Multifix holder Tailstock with an MK3 lining Speed: 1-4500 1/min

bore capacity in steel (diameter): 6 mm total power requirement: 1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ling Systems Stainless heat shrink tunnel, stainless mesh belt, variable speed belt dimensions 2500mm x 400mm, max product height 80mm, adjustable digital temp control

New floor oven HEIN, type: Shopestone -exhibition exhibitor- - Ring tube oven - electric heating - Number of flocks: 5 pieces - Sheet size holder: 60 x 80 cm - Dimensions: B 1,300 x D 1,700 x H 2,145 mm - Exhibition exhibit - Condition: Very good, ready for immediate use Delivery and installation possible by arrangement.

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE!!

SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE!!

FOR SALE: NEW & UNUSED REMOTE CONTROLS FOR BPN 300 WETSHOT CRETE PART NO: 10159971

Kettner Tray-Shrink packer, shrink tunnel, made in 2000, adjusted to 0.50 liter, 0.75 liter, 1.25 liter. 4,6,8,12,24 packs. Still in operation. With printed foil. 12 and 24 packs on Tray.

The ASCO Shredder DS 900 is a powerful double shaft shredder for professional use in recycling, industry, waste disposal, and construction site logistics. With its robust construction, high drive power, and large filling opening, it is especially designed for shredding voluminous, heavy, or resistant materials. Whether timber, plastic, packaging, pallets, production residues, or green waste, Shredder DS 900 impresses with high throughput, controlled material shredding, and a durable, maintenance-friendly design.Two counter-rotating cutting shafts grip the material securely and shred it efficiently, even under difficult conditions. ASCO Shredder DS 900 is suitable for both stationary continuous operation as well as mobile use. The integrated control system offers intuitive operation, while the automatic reversing system ensures trouble-free operation in the event of overload or blocka ...

The ASCO DS 600 is a compact, powerful double-shaft shredder designed for the efficient shredding of a wide range of materials, making it ideal for recycling companies, businesses, municipalities, and construction site logistics. With its robust construction and maintenance-friendly design, it handles wood, green waste, plastics, foils, pallets, packaging material, and production residues reliably and evenly. The counter-rotating shafts and powerful cutting units ensure controlled shredding with minimal space requirements. Its sophisticated design allows it to be used as a stationary or mobile unit, offering maximum flexibility for daily operations. An integrated control system provides simple operation, and an automatic reversing system prevents blockages for trouble-free use. Generous access points make maintenance quick and user-friendly. Whether used as part of a larger processin ...