SPÄNEX sp used machines

Briquette press Spänex SHB 250 Year of construction 2019 Briquette size: 72 x 127 mm - 8 square Pressing capacity: 250 kg/h (depending on material) Oil cooler System pressure: 280 bar Total connected load: 14 Kw Control: Siemens Simatic HMI Hours: 7900 Material silo Spänex type R III-F Dimensions: 2.20 m x 2.20 m x 1.80 m (without feet and blow-in housing) Total body height: 3.50 m Including rotary valve and agitator

Warm air heating Spanex UL/E-50 RW-02 with chips 40 kW L x W x H: 1970 x 820 x 1570 cm Weight 530 kg Year 2012 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Key data: 250 mm, 5 kW, 4700 m³/h

Spänex dust extractor SMU 4500.11 Suction nozzle 250 mm Cleaning vibrating motor Nominal flow rate 4700 m³/h Minimum flow rate 3530 m³/h Motor 5.5 kW Filter renewed

Spänex Aspirator with driving device D= 120mm and distributor G&-5134-M3OBQ

mechanical briquette press briquetting press chip press defective SPÄNEX Type: KS7 Total motor power 13.2 KW Pressing capacity up to approx. 300 kg/h Briquette diameter approx. 50 mm The machine has been in my warehouse for several years. In the briquette press, the brass bearing of the crankshaft is worn. The bearing bushes would have to be replaced. The control system would have to be checked. It is sold as it is, because I clean up my stock. Documents on the machine are available. Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading op ...

Dry Extraction Wall Spänex TAW compact 215 Paint mist extraction wall with dry separator Complete supply air system Hot water heating coil Spray chamber control with touchscreen 2 x 2.0 kW drive power 6000 m³/h volume flow Year of construction: 2011 From joinery liquidation / retirement in GOOD - CONDITION from the carpentry workshop

Key data: 42 m²

Extraction system Filter system Spänex Model ADDITOR U Type II + III – VU – 15 – SBU 165 – S2 – 000 Order number 40132/93 Built in 1993 Filter area 42 m² Filter bag material needle felt, in very good condition Capacity 64,200 m³/h 5 chip collection containers each 165 litres Motor vibration With heat return air duct Fire Extinguishing Line With control cabinet With documentation and circuit diagram With fan 7.5 kW Pipe connection diameter on the fan 300 mm Dimensions of the extraction system Frame with container Overall height 2971 mm Overall width 980 mm Length of the extraction system approx. 3600 mm Plus add-on parts The plant has already been dismantled and Ready for loading from stock

Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Radial fan, chip extraction fan, fan, suction, chip blower -Manufacturer: Spänex, mobile filter system -Motor: Siemens 0.75 kW -Speed: 2850 rpm -Connection input: Ø 140 mm -Base: on wheels -Dimensions: 680/680/H2290 mm -Weight: 60 kg

Suction fan S 250 Motor power 5.5 KW 400V Air capacity 6700m³/h

Capacity 250 kg/h Throughput 2.3 m3 Briquette mould 8 square Antireb 11 kw Weight 1200 mg

Volume flow: 4080m³/h, filter area: 34m², BIA category: G, differential pressure: 1650Pa, filtration surface load: 120m³/h-m², air density: 1.2kg/m³, operating temperature: 20°C. Documentation available. On-site inspection is possible.

Volume flow: 4080m³/h, filter area: 34m², BIA category: G, differential pressure: 1650Pa, filtration surface load: 120m³/h-m², air density: 1.2kg/m³, operating temperature: 20°C. Documentation available. On-site inspection is possible.

Volume flow: 4080m³/h, filter area: 34m², BIA category: G, differential pressure: 1650Pa, filtration surface load: 120m³/h-m², air density: 1.2kg/m³, operating temperature: 20°C. Documentation available. On-site inspection is possible.

In the case of spark-affected smoke and vapours, there is a risk of fire development in the filter material of the extraction system. For this reason, we recommend the use of the BOFA Spark Arresort 2 in such an application. This extinguishes the sparks to the required extent and switches off the extraction system at staker temperature development. Height/with signal tower: 665/870 mm Depth: 530 mm Width: 420 mm Capacity: 850m3/h (500 cfm) Weight: 40 kg (88lbs) Power supply: 115 - 230 V VAT is shown Delivery EXW

Model SP17-5 and SP17-4 in stock, data SP17-5: 3 kw, 3x 380-400-415V, useful frequency: 50 hz, 33 kg, product number: 99284892, pressure port connection: RP2 1/2, pump speed 2900 rpm, nominal volume flow: 17 m³ / h, nominal head: 40 m, number of stages 5, maximum medium temperature: 40° C,

Technical data: Make: Moehringer Width: 1600 mm Length: 6000 mm - with pneumatic belt repeller Pictures and further information on request

Krauss Maffei Type: KM 140-700 C3 Sprinter, with IML Robot Control: MC 4 Built: 2000 Closing unit Clamping force t: 140 Holm size mm: 470 x 470 Installation height min/max mm: 300 plate size: 745 x 770 Spraying unit Screw diameter mm: 50 Spray weight gr: 346 Spray volume cm3: 377 spray pressure bar: 1892 Dimensions and weights Dimensions LxWxH m: 4.8 x 1.8 x 2.2 Machine Weight Kg: 6800 Other with IML Robot 2 Cover, Euromap 12

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 4 020 / 8 160 l/h Engine power: Level 1 1.0 (1.36) kW (PS) Level 2 1.9 (2.6) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 270 mm Width 500 mm Height 810 mm Weight 57 kg Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 9 960 / 19 380 l/h Engine power: Level 1 2.5 (3.4) kW (PS) Level 2 4.2 (5.71) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 270 mm Width 500 mm Height 810 mm Weight 90 kg Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash

New BIG BAG replenishment station with spiral conveyor the devices in stock available for immediate delivery. Spiral conveyor discharge height 2800 mm for 1 qbm big bags. At smaller big bag can be inter's pallets. NET price plus VAT

FRICTION BELT DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw press, riveted, new! -Dimensions: 530 mm i.diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide!

ESCHER-Spiral Mixer M-240 R-P - exhibition machine, brand-new condition, year of manufacture: 2019- for 150 kg of flour or 240 kg dough, bowl capacity 380 litres, bowl, mixing arm and breaking bar made from stainless steel, bowl locking and bowl drive by a patented cone system, two timers and two speeds, automatic reverse from low to high speed, hydraulic lifting and lowering of the machine head, closed bowl cover made from stainless steel machine includes in total two extra bowls

Used spiral mixer DIOSNA, type: SP 160 D - In repainted the bakery State - 2 time watches - new dust cover - Bowl for 160 kg dough or flour-100 kg - spiral stainless - stainless steel boiler - - 2 speeds - 1 reverse - emergency off switch of the mixer is in good condition and is ready for use immediately. Inspection and testing according to arrangement.

Kneading spiral kneading tool spiral for Kemper spiral kneader Model: SPL 75 stainless steel Ready to go! More kneading spirals on request! ; ready to ship

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 840 - 8 100 l/h Engine power 2.2 (3.0) kW (HP) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash