SEM mt used machines

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Speed: 2500 rpm -Power: 4.5 Nm -with gearbox ratio: 1:10 -Design: B14 angle -Shaft diameter: Ø 25 mm -with Hohner encoder 11322 -Quantity: 1 motor available -Price: per piece -Dimensions: 480/260/H180 mm -Weight: 10.3 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Speed: 2500 rpm -Power: 4.5 Nm -Design: B14 -Shaft diameter: Ø 16 mm -with Hohner encoder 267AB -Number: 1 motors available -Price: per piece -Dimensions: 400/100/H145 mm -Weight: 9.3 kg

Dissolver mixer Manufacturer: sem Gearbox: Moteur Asynchronous Power: 0.37 kW with claw Dissolver head diameter: 100 mm LWH: 350 x 350 x 950 mm

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: SEM, Brushless servo motor type HR142G6-88S -Speed: 6000 rpm -Voltage: 530 V -Torque: 21 Nm -Shaft: Ø 24 x 50 mm -Brake: 24 VDC 40 Nm -Number: 2 motors available Price: per piece -Dimensions: 425/142/H174 mm -Weight: 23.8 kg/pc.

Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: SEM Andras, brushless servo motor type HR115A6-88S -Speed: 6000 rpm -Voltage: 530V -Torque: 3.7 Nm -Shaft: Ø 19 x 40 mm -Brake: 24VDC 10Nm -Number: 2 engines available -Price per piece -Dimensions: 275/115/H145 mm -Weight: 7 kg/pc.

DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor -Manufacturer: SEM, DC gear motor -Type: DPM30E4 -Voltage: 36 V -Speed: 70 rpm -technical data: see photo type plate -Shaft: Ø 30 x 50 mm -Dimensions: 430/150/H130mm -Weight: 14.3 kg

Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive -Spindle lifting gear: from double mitre saw elumatec DG 204 -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm -Weight: 9.5 kg

The detected defects from a camera system are transferred via an interface to the fault marking system, where a label is then placed as a marker on the side of the film roll. Project number 2010 / A8392 Rated voltage 230 V; 50 Hz Rated power 1 kW Dispensing speed 1-600 mm/s (depending on label size) Positioning speed 25-30 mm/s Thermal Transfer Printer

M. No.: 167 Format (cm): 58 Equipment / Additional information: 1xreserve knife Very good condition // tested, checked and revised

Available in stock 1 x NEVER USED Capstone IGBT. Most commonly used for Microturbines C60. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Lawn building machine Sembdner RS 60 R, working width 60 cm, drive F&S 2-stroke petrol engine. Reversing gearbox for forward and reverse travel. Equipment: smooth roller with scrapers at the front, hedgehog with cleaning cage in the middle, smooth roller with scrapers (water-fillable) at the rear, seed container with brush shaft and dosing slide. Technically good condition, but with flash rust and engine without ignition sparks - does not start. Branded product from Munich (Germany). Shipping optionally possible.

Key data: 550 mm, 1500 mm

Rolling mill 60" See attachment for details!

Refurbished SEMT PIELSTICK 8PA4 V 200 VG Engine Block in Parts for Sale !! You are welcome to make me an offer for the parts such as crankshaft etc!

Refurbished SEMT PIELSTICK 8PA4 V 200 VG Engine Block in Parts for Sale !! You are welcome to make me an offer for the parts such as crankshaft etc!

A complete cut-off grinding system is available. Product length range: 750mm-1400mm, product diameter: 75mm/100mm, max. deflection at 1400mm: 10mm, tolerance at 75mm: +/-5mm, tolerance at 100mm: +/-9mm, operating hours: 20653h. System components: 1) Cut-off grinding machine Harald Baumgarten. 2) Bundle loader Sema Systemtechnik. 3) Bar breaking unit. 4) Bar rotating drive and measuring station. 5) Weighing station with cut piece sorting. 6) Extraction and filter system. 7) Soundproof cabin with safety fencing. 8) Four-column press Winter. 9) Hydraulic unit with pumps. 10) Control cabinet and operator panel. Documentation available. An on-site inspection is possible. Expected to be available from May 2026.

Manufacturer: Harald Baumgarten/Sema Systemtechnik Model: TM 400S Year of Manufacture: 2014/2015 Type of Machine : Angle Grinding System The system consists of the following components: - Cut-off grinding machine type TM 400 S with bundle loader (manufacturer Sema Systemtechnik, - rod breaking device, - Rod rotary drive / measuring station - Weighing station with section sorting, - Extraction and filtration system, - Soundproof booth (manufacturer: HüWa Schallschutz und Anlagenbau) and protective fencing - Four-column press (Manufacturer: Winter Presses) - Hydraulic power unit with hydraulic pumps - Control cabinet and control panel Find more here - / Contact us at -

Electric motor, three-phase motor -Power: 1.2 kW -Speed: 1400 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 335/127/H186 mm -Weight: 13.5 kg

Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding kit, hose kit, twin hose, oxyfuel hose -Manufacturer: Semperit, Twin hose set -Type: Acetylene-Oxygen ISO 3821 PN2 DN9 -Length: 20 m, hose coupling only on one side -Dimensions: Ø 600 x 120 mm -Weight: 10 kg

Overview The crater was manufactured and taken into operation in 2018 by the German company Sema Maschinenbau GmbH. Till now it was used in a filling line for fresh milk in glass bottles in a German dairy company. The line capacity was 7,700 bph. As the request for milk in bottles was increasing during the lat year, the owner decided to purchase a new line with increased capacity. Therefore this machine has become available. The machine is still in very good condition, as it is still young and only with a low number of operating hours.   Tech Specs: Capacity: 695 crates (of 12 bottles) per hour  1333 crates (of 6 bottles) per hour Formation: 2x3 (1l bottle) 4x6 (0,5l bottle) Gripper heads: for wide bottle neck (can be adapted)    

max. workpiece diameter:29 mm min. workpiece diameter:26 mm workpiece length:66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. Workpiece: Piston pin Drawing number: WHT 000 718, WHT 000 718 A Workpiece dimensions (Ø, WxH): Ø26 x 66; Ø29 x 65 Length: 66 or 65 mm Material: 17Cr3 Quantity: xxx parts / year Cycle time: 5 sec. However, workpiece lengths up to 600mm are manageable. The machining diameter can be adjusted if the appropriate tools are available. The clamping station can currently only accommodate this product. However, this can be adapted by changing th ...

2930-12-A07-0048 0030982820

Material: Stainless steel V2A Drive: 2,2 KW.

2930-12-334-9277 / 0052000675

2930-12-378-7717 5260981120

2930-12-378-7720 5260981220