SCANTOOL 150 used machines

width of the strips: 150 mm band length: 2000 mm band speed: 30 - 34 m/sec total power requirement: 4 kW weight of the machine ca.: 100 Kg dimensions of the machine ca.: 1,2 x 0,5 x 0,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75 mm band length: 2000 mm band speed: 30 - 34 m/sec total power requirement: 4,1 HP weight of the machine ca.: 75 Kg dimensions of the machine ca.: 1,2 x 0,5 x 0,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Folding bench, continuous segment 100 mm high, for U-profiles, without backgauge, Colour: blue, upper bolster stroke: 50 mm, without roller shears, bending angle: 145 degrees

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500 x 1500 Useful length: 9000 mm Chamber number: 129 Cake thickness: 30 mm Filter pressure: 16 bar Closing pressure: 380 bar Test pressure: 440 bar Operating temperature: 50 C Total filter area: 460 m2 Cake volume totalling: 6.2 m3 Motor voltage: 380 volts Plate material: PP Operation page: Right and left Plate transport: fully automatic

used chamber filter press / filter press Passavant A 1500 record size: 1500 x 1,500 mms benefit length: 10,510 mms chamber number: 160 pieces cake thickness: 30 mms cake contents: 8.4 m3 filter pressure: 16 cash Schliessdruck: 380 volts expiry: unanimously whole filter surface: 614.5 m² engine tension: 380 volts / 50 hertz

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 118 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

ARBURG injection moulding machine Type: 420 V 800-150-150 2Component, with turntable controller: SELOGICA year: 1998 Clamping unit Clamping force t Gap between 80 mm: 500 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 545 x 545 Injection unit Screw diameter mm: 25/25 Injection weight gr: 49/49 Injection volume cm m³: 54/54 Spray pressure bar: 2500 Dimensions and weights Dimensions Lxwxh m: 4.7 x 1.7 x 2.1 machine weight kg: 5000 Miscellaneous 2 Component with turntable (with turntable)

Clamping plate, welding table, welding table, straightening plate -Width: 1500 mm -Length: 1500 mm -Height: 125 mm -Surface: good -Holes: Ø 50 mm -Transport dimensions: 1500/1500/H125 mm -Weight: 1500 kg

Complete the accessory package for your extraction / extraction system Hoses, sockets, flex arm and suction nozzle have always been part of our standard range. From now on we complete this package with the hose feedthrough Available now: Hose feedthrough machine wall for suction Dimensions: 150 x 150 mm Ø 76 nozzles on both sides Article-No. MA-201150

Pressure booster system, centrifugal pump, water pump, inline pump used 2 pumps Manufacturer: KSB Type ETALINE ETL 150-150-200 GGSAV10D301104 Year of construction 2017 Pump wheel Ø 221 mm Q 2x 209 m³/h at 14.5 m 11 kW Control KSB PumpDrive PDRV2__011K00 Dimensions approx. 2500 x 1200 x 1500 mm All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

Wrapping/Film Packaging Machine CMB Type EBC 150/70 ERL 150 Specifications: •Fully automatic • Package height max. (mm): 650 • Package height min. (mm) :15 • Package width max. (mm).: 1250 • Package length min. (mm): 300 • Infeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Discharge conveyor (mm): approx. 2,000 x 1,300 x 900 • Outlet table • Total dimensions (mm): approx. 8,000 x 3,000 x 2,200 • Total connected load (kW): approx. 5

Machine name: Passavant 1500 Manufacturer: Passavant Type: 1500 Year of Make: 1977 Design: Bridge spar press Filter pressure: 15 bar Press capacity: 3,000 liters Expiration:Closed Filter area: 215 m2 Plate format: 1500 x1500 mm Number of plates: 60 Panel material: Polypropylene Plate Conveyor: Automatic Filter Cloths: No Filter Cloth Washer: Yes Panel package length: 4,400 mm Cake thickness: 30 mm Closing pressure: approx. 400 bar Dimensions: L 8,300 x W 1,950 (2,400) x H 2,930 (700) mm Accessories: A hydraulic system, a light barrier, a filter cloth washer Condition: Used Price: On request

Manufacturer: BAC (Spain) Model: F-150-10-150 Type: Ball Valve Size: 6" (DN150) Pressure Rating: 150 lbs (ANSI Class 150) Material: • Valve Body: CF8M Stainless Steel (AISI 316 equivalent) • Ball: 316 Stainless Steel • Gasket: PTFE (Teflon) Connection: ANSI Flanged Ends

Key data: 1500 , 220 , 40

Manufacturer: BAC (Spain) Model: F-150-10-150 Type: Ball Valve Size: 6" (DN150) Pressure Rating: 150 lbs (ANSI Class 150) Material: • Valve Body: CF8M Stainless Steel (AISI 316 equivalent) • Ball: 316 Stainless Steel • Gasket: PTFE (Teflon) Connection: ANSI Flanged Ends

Aircooled chiller/Heat pump YORK YLHA 150 TP 380T 145 kW / 150 kW Cooling capacity: 145 kW / 41.23 tons (12/7 — 35°C) Heating capacity: 150 kW / 42.65 tons (40/45 —7°C) Year of manufacture: 2017 Options: Heat pump. Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 3 pcs. Copeland ZP182KCE-TFD-455 (scroll) + 1 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. (frequency inverter) Hydraulic module: 2 pcs. water pump Wilo DPL40/150-3/2-IE2, buffer tank 152 l. Dimensions: 3.8x1.1x2.3 m. Weight: 1535 kg Working hours: 14618 / 19252 / 15204 / 19621 h. Condition: Good

Technical data Execution: Double sided grinding wheel Grinding wheel: Diameter: 150 mm Width: 15 / 40 mm Bore: 12.7 mm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 20 kg Overall dimensions machine: Length: 400 mm Width: 250 mm Height: 300 mm

Key data: 1500 kN

Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Year of Make: 2005 Injection unit: Screw diameter: 25 mm Injection weight: 49 g Spray pressure: 2500 bar Dosing volume: 54 ccm Clamping unit : Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: 2K Machine Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario - This offers the possibility of using the injection unit, e.g. for side spraying Parallel movements The vertical injection unit - screw diameter fi 25 mm (49 g/hp) It is possible to change screw diameters in both injection units for the screw diameters recommended by  ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Langen, hydraulic cylinder type ZD 63/150 -Stroke: 150 mm -Cylinder: outside Ø 75 mm -Piston rod: Ø 45 mm -Mount: hole circle Ø 69 mm -Dimensions: 345/140 / H95 mm -Weight: 11 kg

Spare part for grinding machine, angle grinder, lathe tool grinder, tap and die grinder, milling cutter grinder, surface grinder, drill grinder -Clamping angle: for tool grinding machine -Type: unfortunately without a type designation -Details: see photos -Dimensions: 150/150/H215 mm -Weight: 8.2 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: ROM-Boffalora, double-acting hydraulic cylinder, 150 mm stroke -Type: 65 45M 150 FRA S -Piston rod: Ø 45 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 375/100/H160 mm -Weight: 14.8 kg/pc.

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder, compensating cylinder -Hydraulic cylinder: tie rod cylinder stroke 150 mm -Type: DZL 50N28/ 150 SFSFF 40 -Art.No.: 153/10948 97008023/03 -Piston rod: Ø 28 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 324/116/H105 mm / 335/120/H110 mm -Weight: 5.8 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Hydraulik Griessen, double-acting hydraulic cylinder stroke 150 mm -Type: HN3-GHI 80/55-150 DH -Piston rod: Ø 55 mm / M34 -Hole: Ø 40 mm -Dimensions: Ø 128 x 545 mm -Weight: 24.4 kg

Qty. 1 Second-hand extrusion press Mfc.: Kobe Steel Built: 1985 Force: 1500 MT Type: Horizontal 4 cylinders, indirect press, independent Control Billet dimensions: dia. 175 mm x 400 – 800 mm Length Application: Extruded?Copper?Alloys

electric motor, three-phase motor -Power 0.37 kW -Electric motor: 1500 rpm -Shaft: Ø 19 x 40 mm -Design: B5 -Dimensions: 270/200/H205 mm -Weight: 9 kg

We offer here a climate test chamber from Weiss with Feucht! The climate test chamber was only serviced by Weiss/Vötsch in Dec, 2020 and has the test sticker until Dec. 2021! All tests were carried out, another test run was carried out in our company, the humidity and temperature were checked with calibrated test equipment. The climate test chamber has been subjected to an annual inspection and is in a perfect condition! The logbook is attached WHITE 1500SB/010JU/40DU Temperature range -40°C - +180°C Humidity 15%- 95% Air conditioning: +10°C - +95°C Pihyv Test room: 1500 liters Internal dimensions: 1490 mm deep, 1100mm wide, 945mm high External dimensions: 2470mm wide, 2000mm high, 1450 wide Weight approx. 1100kg Refrigerant: R404a 2,00kg Cabinet has no feet and stands stably on a frame If you have any further questions, please do not hesitate to contact us