SAHINLER hpk used machines

SAHINLER HPK 65 3-roll bending machine was built in 2005 in Turkey by Şahinler Metal Makina Endüstri A.Ş. The machine, designed for precision machining of tubes and profiles, is an excellent choice for any industrial plant. It enables workpieces to be made in circular, arc or spiral shapes with a fixed radius. The machining process is performed by three hardened rollers, of which the two lower rollers have hydraulic adjustment. These rollers are driven by a reliable, high-powered motor located inside a fully welded housing. Depending on production requirements, the SAHINLER tube and profile bending machine can operate in both vertical and horizontal positions. The total weight of the machine is approximately 1000 kg. Technical specifications of the SAHINLER HPK 65 bending machine - number of rollers: 3 - roller diameter: 180 mm - shaft diameter: 60 mm - working speed: 5 m/min  ...

Specifications: 2 castors hydraulically adjustable 3 rollers driven Shaft diameter: 120 mm Roll diameter: 390 mm lateral hydr. Controlled arm correctors left and right Bending capacity square: 65 x 65 mm Bending capacity flat steel: 125 x 25 mm Motor power: 15 kW Mobile control panel with digital display Dimensions (length x width x height): approx. 1500 x 1650 x 2050 mm Weight: approx. 5 to The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 34200 € : 653.22 € : 100 mm : 315 mm : 3 : 7.5 kW : 7 m/min : 100x20 mm / 800 mm, 30x10 : 200x30 mm / 1.200 mm, 160 : 60x60 mm / 750 mm, 15x15 : Ø 75 mm / 800 mm, Ø 15 mm : Ø 125x2,5 mm / 1.400 mm, : 100x40x4 mm / 1.300 mm, 2 : 80x80x5 mm / 1.500 mm, 25 : 100x100x12 mm / 1.000 mm, : 100x100x10 mm / 1.000 mm, : UPN 180 / 900 mm, UPN 30 : UPN 180 / 1.000 mm, UPN 3 : IPN 180 / 1.000 mm, IPN 8 : 1465 mm : 2000 mm : 1700 mm : 4000 kg 3 hydr. driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rollspositions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to theCE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoT ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11800 € : 226.56 € : 60 mm : 215 mm : 215 mm : 3 : 1.5 kW : 4 m/min : 80x20 mm / 1200 mm, 40x10 : 120x25 mm / 600 mm, 50 x : 50x50 mm / 800 mm, 20x20 : Ø 50 mm / 800 mm, Ø 20 mm : Ø 100x2 mm / 1600 mm, Ø 6 : 80x40x3 mm / 1400 mm, 40x : 70x3 mm / 1600 mm, 40x2 m : 70x70x7 mm / 1000 mm, 40x : 70x70x7 mm / 1200 mm, 40x : 1000 mm : 1400 mm : 1650 mm : 950 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 260 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090180 : prompt, Zwischenverkauf v : Türkei : 8300 € : 160.19 € : 1 : 50 mm : 152 mm : 162 mm : 3 : 1.1 kW : 4,5 m/min : 60x10 mm / 600 mm, 20x10 : 100x15 mm / 600 mm, 50 x : 35x35 mm / 600 mm, 15x15 : 35 mm / 600 mm, Dm. 20 mm : 70x2 mm / 1200 mm, Dm. 25 : 70x30x3 mm / 1500 mm, 30x : 50x50x3 mm / 1600 mm, 20x : 50x50x6 mm / 600 mm, 30x3 : 50x50x6 mm / 900 mm, 30x3 : 810 mm : 950 mm : 1500 mm : 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 20400 € : 391.68 € : 80 mm : 245 mm : 3 : 4 kW : 6 m/min : 100x20 mm / 2000 mm, 80x2 : 125x25 mm / 600 mm, 60x5 : 45x45 mm / 500 mm, 15x15 : Ø 50 mm / 500 mm, Ø 15 mm : Ø 100x2,5 mm / 1.200 mm, : 80x25x3 mm / 800 mm, 25x1 : 70x70x3 mm / 1.300 mm, 25 : 80x80x8 mm / 800 mm, 30x3 : 70x70x7 mm / 700 mm, 30x3 : UPN 140 / 1600 mm, UPN 12 : UPN 140 / 1.600 mm, UPN 1 : IPN 120 / 600 mm, IPN 80 : 1450 mm : 1000 mm : 1400 mm : 1700 kg 3 motor driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTe ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 51900 € : 980.91 € : 120 mm : 390 mm : 3 : 15 kW : 2/7,5 m/min : 125x25 mm / 1.200 mm, 30x : 200x50 mm / 1.000 mm, 100 : 65x65 mm / 750 mm, 20x20 : Ø 80 mm / 850 mm, Ø 20 mm : Ø 160x4 mm / 2.800 mm, Ø : 120x40x4 mm / 1.800 mm, 3 : 90x90x5 mm / 1.800 mm, 30 : 120x120x12 mm / 1.200 mm, : 100x100x10 mm / 1.200 mm, : UPN 220 / 1.000 mm, UPN 1 : UPN 220 / 1.200 mm, UPN 1 : IPN 220 / 1.000 mm, IPN 8 : 2000 mm : 1650 mm : 1900 mm : 4450 kg 3 rolls driven (hydromotor and planetary gearbox) shafts made of special steel,hardened and ground hydraulic adjustment of the 2 lower rolls hardened universal rolls lateral rolls hydraulic adjustable in 3 axes horizontal and vertical operation mobile operating panel 2 working speeds digital read out (3 axes) machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE M ...

Manufacturer: Sahinler Type: PK-30 F Year of construction: 2018 Shafts: 30 mm Lower rollers: 118 mm Top roller: 148 mm Rotation: 26-12 rpm Location: Homburg, Germany

plate thickness: 1,2 mm 0: 62 mm weight of the machine ca.: 50 kg Producer: Sahinler Type: IK 1,2 YOM: new Shaft Length: 140 mm Bordering Capacity: 1,2 mm Roll-Ø: 62 mm Throat Depth: 100 mm Dimensions of the Machine (LxWxH): 560 x 220 x 500 mm Weight: 50 kg Additional information: • Cast iron heavy duty main frame • Forward-backward adjustable sheet support • Easy to carry for workshops • Forward-backward adjustable bottom shaft • Rolls shafts are special steel material • 7 set of rolls standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 0,8 mm 0: 52 mm weight of the machine ca.: 30 kg Producer: Sahinler Type: IK 0,8 YOM: new Shaft Length: 110 mm Bordering Capacity: 0,8 mm Roll-Ø: 52 mm Throat Depth: 80 mm Dimensions of the Machine (LxWxH): 380 x 180 x 380 mm Weight: 30 kg Additional information: • Cast iron heavy duty main frame • Forward-backward adjustable sheet support • Easy to carry for workshops • Forward-backward adjustable bottom shaft • Rolls shafts are special steel material • 7 set of rolls standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Sahinler workshop press is available. Press pressure: 150t, max. pressure: 244bar, working width: 1520mm, piston stroke: 300mm, ram dimensions X/Y: 200mm/1520mm, through hole: 100mm, table dimensions X/Y: 600mm/1520mm, max. installation height: 610mm. Forward speed: 9mm/s, retraction speed: 10mm/s, working speed: 5mm/s, drive power: 11kW. Machine dimensions X/Y/Z: approx. 2500mm/1000mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

sheet width: 2100 mm plate thickness: 2,0 mm distance between columns: 2150 mm roll diameter: 90 mm total power requirement: 1,5 KW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 2,5 x 0,7 x 1,3 mm Sheet metal bending machine 3 rollers - 2 driven rollers - Foot switch - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brand Sahinler Model: PK 35 Year of Make: 2024, Unused Capacity (Kw) 1.5 Voltage 400 Frequency (Hz) 50 Dimensions LxWxH (mm) 1000 x 750 x 1400 Weight (Kg) approx. 400 Quantity in stock 4 Made in Turkey Ø Diameter (mm) 50 Comments Unused machines for competitive prices, multiple units in stock, footpedal included

SAHINLER 4R HC 10-185 4-roll plate rolling machine was built in 2021 in Turkey by Şahinler Metal Makina Endüstri A.Ş. The machine, distinguished by its high precision and efficiency, is designed to roll conical forms from sheet metal with a maximum thickness of 4 mm. The machining process is performed by four induction-hardened rollers with their own drive, in the form of planetary gears and reliable hydraulic motors. To ensure uninterrupted, long-term operation, each of the four rollers has been subjected to prior heat treatment and resistance tests. This solution, combined with the stable construction made of high-quality steel, guarantees the achievement of high repeatability of the manufactured parts. The 4R HC 10-185 plate bending machine weigh 2545 kg. Technical data of the SAHINLER 4R HC 10-185 plate rolling machine - number of rollers: 4 - rollers working length: 1050 mm  ...

This Sahinler HKP-Z 100 was manufactured in 2016. A robust C-frame PLC controlled deep drawing press, it features a pressure force of 1000 kN and a stroke of 500 mm. The machine includes a large table size of 900x600 mm and a throat depth of 300 mm, suitable for diverse punching and bending tasks. Consider the opportunity to buy this Sahinler HKP-Z 100 punching and bending machine. Contact us for more information about this machine.

: neu : 2024 : 9729 : prompt, Zwischenverkauf v : Türkei : 28450 € : 488.96 € : 1 : 25600 € : 1550 mm : 7 mm : 7 mm : 4.5 mm : 4.5 mm : 3.5 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 3750 mm : 960 mm : 1100 mm : 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of ...

sheet width: 2070 mm plate thickness: 25 mm pre-bending: 18 diameter of upper rolls: 320 mm side roll diameter: 260 mm diameter of lower rolls: 320 mm : 26 kW : 8100 kg : 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 32480 € : 620.37 € : 1550 mm : 9 mm : 9 mm : 7 mm : 7 mm : 5 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3250 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened roll ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 43550 € : 831.81 € : 1550 mm : 12 mm : 12 mm : 10 mm : 10 mm : 8 mm : 220 mm : 200 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 %  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 97400 € : 1840.86 € : 2050 mm : 30 mm : 30 mm : 25 mm : 25 mm : 20 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5000 mm : 2000 mm : 1900 mm : 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommende ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31600 € : 603.56 € : 2050 mm : 6 mm : 6 mm : 4 mm : 4 mm : 3 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 4250 mm : 960 mm : 1100 mm : 2800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 48000 € : 916.8 € : 6 mm : 4 mm : 70 mm : 4000 mm : 550 mm : 8.75 kW : 4250 mm : 720 mm : 2000 mm : 2015 kg Easy operation with mobile control panel with push buttons Built according to EC Safety Directives and has CE Mark One set of flanging rolls included. Radius can be selected. One set of cutting blades included Min. cutting diameter: 600 mm (with adapter for small diameter 400 mm) Min. flanging diameter: 550 mm (with adapter for small diameter 350 mm) Rotating speed 70 rpm with adjustable max. torque Top and bottom flanging rolls powered in rotation with planetary reducers Hydraulically adjustable bottom head for both, flat and crowned dish flanging Both cutting and flanging operation on the same head Users Manual Optional devices as fix or variable angle japanese hat attachement, rolls for stainless steel or high speed, small diamet ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 46300 € : 884.33 € : 2050 mm : 11 mm : 11 mm : 9 mm : 9 mm : 7 mm : 220 mm : 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 4080 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 40900 € : 781.19 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 200 - 220 mm : 200 - 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more  ...

pressure: 100 t stroke: 300 mm table surface area: 500 x 1520 mm column travel between the guideways: 1520 mm dayligth: 680 mm pressure: max. 244 bar weight of tools max.: 270 kg ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec oil volume: 90.0 l voltage: 400 V total power requirement: 7.5 kW weight of the machine ca.: 2700 kg dimensions of the machine ca.: 2630 x 1000 x 2350 mm ** current new price approx. 18.000 euros ** special price on request ** according to previous owner rarely in use Equipment: - robust electro-hydraulic workshop/bending press * left right guided - with fixed working cylinder - Pressing depth adjustable by cams - Height-adjustable work table - 2x locking bolts for table fixation - 3x directional control valve supply-empty-return - Stepless adjustment of working pressure - 1x freely movable 2-hand operation - Original operating instru ...