SAEILO contur used machines

This Saeilo Contur MMV 810 S vertical machine center, manufactured in 2012, features a Siemens 828D control system with an electronic handwheel for precise operation. It has 6224 duty cycle hours and 1821 spindle hours. The traverse paths are X = 810mm, Y = 400mm, Z = 500mm, with a 900 x 400mm table featuring 3 T14 slots. It includes a double arm tool changer with 20 slots, a BT-40 tool holder, and a high-performance spindle reaching 10000 rpm with oil cooling and a 20 bar internal coolant supply. Contact us for more information.

x-travel: 1520 mm y-travel: 700 mm z-travel: 800 mm control: Siemens 828 D Shop Mill table surface area: 1600 x 700 mm rapid traverse: 30 m/min table load: 1,4 t turning speed range: 8000 U/min max. torque on the spindle: 300 Nm power capacity - milling spindle: 19,5 kW no. of tools in the magazine: 30 Stück tool taper: SK 40 | | weight of the machine ca.: 10,0 t dimensions: 4,4 x 2,3 x 2,9 m Equipment: - Coolant through the spindel - Rigid tapping - Dialog programming Shop Mill - Chip conveyor - external elect. hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications Manufacturer: Saeilo Type: FP3-A Control: Contur M Year of Make: 2021 Travels: X 400 mm Y 300 mm Z 375 mm Clamping area: 400 x 800 mm Speed: 50 – 2,000 rpm Tool holder: SK40 Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included Coolant Setup Table cabin Electronic handwheel Hydraulic tool clamping Machine Light

Lathe Saeilo TUR 630 MN 3000

This 3-axis Saeilo TV1000A vertical machining center was manufactured in 2001. It features a Heidenhain TNC 410 control unit, a table size of 1250 x 850 mm, and a tool magazine with 40 stations. The spindle supports SK 40 taper and operates at speeds up to 8000 RPM. If you are looking to get high-quality milling capabilities, consider the Saeilo TV1000A machine we have for sale. Contact us for more information.

turning diameter: 320 mm turning length: 600 mm control: Fanuc Oi-TD spindle bore diameter: 74 mm number of controlled axis: 2 turning speed range: 3000 U/min rapid speed: 20 m/min number of tapers in turret head: 12 direkt tail stock: Ja power requirement: 15 kW weight: 5,0 t dimensions: 3,7 x 1,6 x 2,0 m Used CNC- Lahte 2 axis - 3 jaw chuck Ø 250 mm - chip conveyor - oil dust collector - Tool presetter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A precision lathe is offered: distance between centers: 1500mm, center height: 265mm, swing diameter over bed: 530mm, speed range: infinitely variable up to 2000rpm. Machine dimensions X/Y/Z: approx. 2700mm/850mm/1400mm, weight: approx. 2100kg. The brake has a problem. Inspection possible by appointment.

CONTROLS   CNC controls HEIDENHAIN ITNC 620 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   .. among of them simultaneous CNC axes: 3   X-axis travel: 1000 mm   Y-axis travel: 550 mm   Z-axis travel: 550 mm TABLE   table surface (left-right): 1100 mm   table surface (front-back): 550 mm   workpiece load (max): 800 kg SPINDLE / HEAD   spindle type: vertical   spindle revolutions (max): 10000 /min   tool fixture: ISO SK 40   drive power: 13.5 kW AXIS DRIVES   feed velocity (max): 10000 mm/min   rapid traverse X: 36000 mm/min   rapid traverse Y: 36000 mm/min   rapid traverse Z: 36000 mm/min TOOL MAGAZINE   magazin type: disc magazine   number of positions: 30   tool diameter max.: 76 mm   tool length max.: 250 mm   tool weight max.: 6 kg ELECTRICAL SPECIFICATIONS   mains power supply: 15 kVA DIMENSIONS / WEIGHTS  ...

Groove milling machine rapid Contur380 Cmhight VoltTisch 220 x 1000 mmTiefe 150 Cmwidth 150 140 cmNutlänge of 10-200 mmNutbreite 3-25 mmGuter condition fully functional

max. workpiece length: 4500 mm profile spindle: 1 Stück main drive: 20 kW Control: Siemens Weinig Conturex 2 C 114 --------------------------------------- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm -------------------------------------- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: --------------------------------------- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: --------------------------------------- Number of pockets: 30 mm Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head --------------------------------------- For horizontal and vertical drilling and milling work without tool changes --------------------------- ...

Manufacturer: Weinig, Type: Conturex 1, Year: 2004, Control: 840 D, Program: Alphacam, Working range X: 1.500, Working range Y-axis: 250, Working range Z: 125, C axis: yes, Number of milling spindles: 2, Milling engine 1 hours power: 10,5, pm: 18.000, Milling engine 2 hours power: 10,5, pm: 18.000, Number of tools per tool-magazine: 36, Year :2004

This 3-axis ZEISS Contura 7/10/6 RDS was manufactured in 2019 and features a robust motorized CNC drive system with a maximum vector speed of 465 mm/s. It includes the ZEISS RDS-C articulating head and VAST XXT TL3 sensor, capable of scanning speeds up to 150 points/second. Ideal for precise measurements with a maximum workpiece weight of 730 kg. Consider the opportunity to buy this ZEISS Contura 7/10/6 RDS CMM machine. Contact us for more information about this machine.

The Siebtechniek CONTURBEX is a continuously operating filtration centrifuge and it achieves his flexibility by means of a centrifuge scroll driven at a differential speed. The unique functional principle of pre-accelerated suspension feed to the screening device, combined with homogeneous distribution by means of the worm, enables this centrifuge to perform complex tasks. We achieve optimum dewatering results by adapting the machine parameters, G force and dwell time. The solid material is conveyed by means of a worm rotating at a different speed from the bowl. Solid and liquid are conducted away into separate housing sections. Mother liquor and washing liquid can be drained away separately from each other. The drive for the SIEBTECHNIK screen worm centrifuge stands out for its powerful gear units and a high-quality bearing support. A central oil-circuit lubrication system supplies all  ...

The testing device can measure even the smallest leaks in packaging (helium detection)., The device is little used and in good condition., Information from the manufacturer’s brochure:, The detection limit of < 10-8 mbar l/s of the CONTURA Z can only be determined by mass spectrometric, Analysis can be achieved with a test gas., However, when sensitive flexible packaging is exposed to such a pressure difference,, the sealing seams could be subjected to such severe stress that the package could even burst., Such stress is eliminated by the patented membrane chamber principle of the CONTURA Z²., Function:, The product to be tested is placed manually or automatically on the bottom membrane. When the lid, is closed, the test procedure is initiated automatically., During the evacuation, the pressure of the atmosphere pushes the highly elastic membranes against the, packaging, and the conto ...

Used centrifuge made by Siebtechnik GmBH, type Conturbex H520 K. New: 2004. Technical data: Drum diameter - 520 mm Max. speed - 2200 rpm Capacity - about 25 m3/h Oil volume: 18 liters Drum material: stainless steel 1.4571 Motor : Celma 30 KW The machine was operated with pori-troxan (Troxxan). It's made of acid-resistant steel, so after cleaning with nitric acid, it can be used for other products, including food. The machine is in very good condition, with virtually no visible wear inside.

SAEILO CONTUR TV 1000 Manufacturer: SAEILO (Germany) Model: CONTUR TV 1000 Year of Make: 1997 Control: HEIDENHAIN Technical data X/Y/Z axis movement: 1016/610/508mm Table size: 1080 x 580 mm Max. table load: 600 kg Tool change: 40-fold Spindle taper: SK 40 Cutting feed speed X / Y / Z: 0.25 to 5,080 mm/min Rapid traverse X / Y / Z: 20,000 mm/min Rapid traverse Z: 1,500 mm/min Spindle speed: 5 - 8,000 rpm Spindle power: 11 / 16.5 kW Machine weight: 6,000 kg Auction-ID: A1-46872-46

Machine number: 291218 Center width: 760 mm Center height: 205 mm Spindle bore: 58 mm Main spindle Speeds 12: from 20 to 2000 rpm Spindle head mount: CAMLOCK 6 incl. two-axis digital display from the manufacturer FAGOR The machine is equipped with a tailstock, a Multifix turning steel holder and a three-jaw chuck from the manufacturer SMW AUTOBLOK, diameter: 200 mm and a steady rest Reference: Hercegfi - Lot 48 Auction-ID: A7-46763-220

Machine number: 2820-0492 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 19 A Control: DECKEL CONTUR 3 Travel X-axis: 400 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Feed: 2 - 3600 mm/min Rapid traverse: up to 4 m/min Tool holder: SK 40 Table dimensions: 700 x 460 mm with 7 grooves incl. vice, jaw width: 110 mm Reference: Hüpometall - Lot 22

Control:SIENENS Sinumerik 840D Grinding lenght: 880 mm Grinding width: 430 mm Grinding height: 585 mm Size of magnet: 600x200mm Dimension of grinding wheel: ?250 ? 400 x 50 mm Speed of grinding spindle: 1500 ? 4400 rpm grinding flange included, conture

CNC Mill, Cover, FP4-AT, 3 Axis X560/Y500/Z450 Speed range 40-4000 min-1 Control Contur-3, Mounting SK-40, weight approx. 3.4 t.

Lid FP4-MA Contur 2 with handwheel ( universal tool milling machine ) BJ 1987

BJ Band Saw Kasto SBL 280 U 1998 Conventional lathe E3N01 Lathe Hurco TM8i Surface Grinding Machine FSG-1640AD Wagner 1997 Silent E Forklift R20-15 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX30t 3-axis milling machine Hurco VMX64 Wire EDM Machine Mitsubishi FA20 Zeiss Contura G2 CNC Coordinate Measuring Machine 2007

Machine number: 2820-0492 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 19 A Control: DECKEL CONTUR 3 Travel X-axis: 400 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Feed: 2 - 3600 mm/min Rapid traverse: up to 4 m/min Tool holder: SK 40 Table dimensions: 700 x 460 mm with 7 grooves incl. vice, jaw width: 110 mm Reference: Hüpometall - Lot 22 Auction-ID: A7-46763-101

CMM machine manufactured in 2003. This JENOPTIK wave C8000 features a measuring height of ±20 mm and a measuring length of 120 mm. It includes a feed unit, a column, and operates on Windows 2000 with Turbo Contur software. The package comes with a PC tower, monitor, keyboard, mouse, printer, granite surface plate, and calibration accessories. If you are looking to get high-quality contour measuring capabilities, consider the JENOPTIK wave C8000 machine we have for sale. Contact us for further details.

Milling machine DECKEL FP 4 AT Technical data Travel X / Y / Z: 560 / 500 / 390 mm Table size X / Y: 900 / 530 mm Spindle speed: up to 4,000 rpm Control: Contur-3 Recording: SK-40 Weight: approx. 3.4 t Auction-ID: A1-46872-29