SABROE smc used machines

Amonyak refrigeration plant,from a meat processing plant. The plant is made of 3stk. Compressor Sabroe, Compressor 1. SABROE Type: SMC104L-HP,276m3/h,1465rpm,R717,Y.O.M.1996. Electric motor SCHORCH Type: KN7225M-BB01F-Z,55kW. Compressor 2and3. SABROE Type: CMO28,190m3/h,1460rpm,R717,Y.M.1996. MOTOR SCHORCH Type: KN7200M-BB01F-Z,37kW. The plant is in a very good condition,see pictures. Several pictures and info on request.

Manufacturer: SABROE Tip: SV 140 off; very good

SABROE PAC 163 HR-A Brand:SABROE Type:PAC 163 HR-A Stock number:M21-4474 Cooling capacity:1,437 kW Application:Cooling / Heating Refrigerant:R717 (NH3/Ammonia) Refrigerant Content:175 kg Voltage:400 Volts Power consumption:126 kW Motor power:160 kW Dimensions:5800 x 2660 x 2850 mm Weight:8,800 kg Year:2007 Number in stock:2 piece(s) Price:Quotation request Description: A very well maintained complete Sabroe water-cooled water chiller/heat pump. This water chiller is equipped with a frequency-controlled Sabroe SAB163HR compressor (up to 6,000 RPM), a Schorch 160 kW electric motor, an Alfa Lava evaporator and condenser, a complete control cabinet with a Vacon frequency controller and a Unisab II compressor/chiller controller. All necessary documentation is available. The stated capacity is for water +12/+7°C in/out. Visit also our website: used-refrigeration

SABROE CHILLPAC 106E Brand:SABROE Type:CHILLPAC 106E Stock number:M21-4529 Cooling capacity:538 kW Refrigerant:R717 (NH3/Ammonia) Refrigerant Content:27 kg Voltage:400 Volts Motor power:132 kW Dimensions:3200 x 1000 x 2000 mm Weight:4,045 kg Year:2007 Number in stock:1 piece(s) Price:Quotation request Description: Very nice water-cooled ammonia Sabroe chiller with a Sabroe piston compressor, a 132kW e-motor and a Unisab II controller. Mentioned capacity at a water temperature of +12/7°C (in/out) and a condenser water temperature of +30/35°C (in/out). Visit also our website: used-refrigeration

Used Sabroe VMY 447 H screw compressor unit on NH3 (Ammonia). Complete with a Leroy Somer PLS 315LG2 B3 electric motor - 50 Hz - 355 kW - 2960 RPM, Sabroe OHU 4131 oil separator with a volume of 610 liter, Sabroe OWSG 2719x2 oil cooler, Sabroe OF 2108 oil filter, oil pump and a control cabinet. Specifications: Brand: Sabroe Type: VMY 447 H Refrigerant: NH3 (Ammonia) kW at -40ºC/+25ºC: 525,0 kW m³/h: 2675 m³/h Dimensions: 3500x1640x2750 mm (LxWxH) Amount in stock: 1

Used Sabroe PAC 202 LM-A water cooled chiller on R717 (Ammonia). Complete with 1 Sabroe SAB 202 LM screw compressor, Schorch KN7315L-AX01B-Z electric motor - 50/60 Hz - 315/360 kW - 2965/3565 RPM, Sabroe OHU 4131 oil separator with a volume of 610 liter, Sabroe GHEA 083002-C separator with a volume of 1650 liter, Alfa Laval MK15-BWFGR plate heat exchanger, Alfa Laval MK15-BWFDR plate heat exchanger and a control cabinet with a Siemens TP700 Comfort controller. The chiller has a capacity of 1668 kW at a water inlet of 12°C and outlet 6°C. Specifications: Brand: Sabroe Type: PAC 202 LM-A Product type: Water cooled chiller Capacity kW: 1668,0 Capacity Tons: 474,3 Refrigerant: R717 Weight: 10.700 kg Dimensions: 5700x2330x3100 mm (LxWxH) Display: Siemens TP700 Comfort

Used Sabroe PAC 202 LM-A water cooled chiller on R717 (Ammonia). Complete with 1 Sabroe SAB 202 LM screw compressor, Schorch KN7315L-AX01B-Z electric motor - 50/60 Hz - 315/360 kW - 2965/3565 RPM, Sabroe OHU 4131 oil separator with a volume of 610 liter, Sabroe GHEA 083002-C separator with a volume of 1650 liter, Alfa Laval MK15-BWFGR plate heat exchanger, Alfa Laval MK15-BWFDR plate heat exchanger and a control cabinet with a Siemens TP700 Comfort controller. The chiller has a capacity of 1668 kW at a water inlet of 12°C and outlet 6°C. Specifications: Brand: Sabroe Type: PAC 202 LM-A Product type: Water cooled chiller Capacity kW: 1668,0 Capacity tons: 474,3 Refrigerant: R717 Weight: 10,700 kg Sizes: 5700x2330x3100 mm (LxWxH) Compressors: Sabroe SAB 202 LM Display: Siemens TP700 Comfort

Turning Diameter 400 mm Turning Lenght 650 mm With C ,Y axes and subspindle Control Unit Fanuc 31i Can be inspected under power

Guide cylinders, pneumatic guide cylinders, pneumatic cylinders, compact cylinders -Piston diameter: 16 mm -Stroke: 40 mm -Max. pressure: 10 bar -Dimensions: 105/65/H35 mm -Weight: 0.5 kg

Sensor module -Siemens: Sinamics Sensor Module -Type: SMC20 6SL3055-0AA00-5BA2 -Dimensions: 115/30/H165 mm -Weight: 0.4 kg

CNC CONTROL: MSD 501 II, FANUC FEATURES: DIAMETER ADMITTED ON THE BED, MM 680 MAXIMUM TURNING DIAMETER 440 MM N1 MAXIMUM TREATMENT DIAMETER N2 322 MM MAXIMUM TURNING LENGTH, MM 471 THE STANDARD MACHINING DIAMETER MM170 MAIN SPINDLE: STEP PANEL 45 MM COUNTER SPINDLE: HOLE PITCH LINE 43 MM TURRET 1: POSITION N12 ALL MOTORIZED TOWER 2: POSITION N12 ALL MOTORIZED

Machine type MIG/MAG inverter welding system Böhler brand Type Uranos 2000 SMC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 35 % ED at 200 amps 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Wire feed gearbox 2-roller gearbox Fuse 16 amps Dimensions L x W x H 500 x 210 x 400 mm Special accessories TIG DC welding without HF E-welding, MIG soldering Weight 13 kg Age 6 months Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece ...

We offer a used SMC Carousel mini load of the manufacturer SSI Schaefer for sale. Specifications: Powerful modular shelving system for small goods (miniload), 68 container racks with 12 levels per carousel Container 600x400x310mm, weight 30kg (not included) 1040 transport units per hour Approx. 3,264 memory locations The entire system (miniload, flow racks, sorting system) consists of 4 carousels Length per carousel approx. 15 m, height approx. 4.5 m Total area approx. 320 m2 Maximum walking speed 0.6 m/s, Machine location: 89-600 Chojnice/Poland Machine is dismantled, stored dry and ready for shipping. If you are interested, please contact us: +48601553406 or biuroregalux.pl

Key data: 500 mm, 700 mm, 3500 1/min

Make: Spinner Model : TC 110 SMCY Control Siemens 840 D ShopTurn Year of construction 2006 Specifications: Turning diameter 500 mm Circulation diameter 690 mm Turning length 900 mm Y-axis -55/+65 mmmm C-axis 0.001° Spindle passage main spindle 110 mm Spindle passage counter spindle 66 mm Main spindle motor 28 kw High-speed main spindle 3200 rpm. Counter spindle speed 5000 rpm. Rapid traverse x/y/z 24 m/min. Sauter Star Revolver VDI 50 Number of stations 12-fold Driven tools 12 Speed driven tools 4000 rpm. Machine weight approx. 7800 kg Dimensions set-up (L x W x H) with chip conveyor 5500 x 2200 x 1800 mm Accessories: automatic pick-up device Measuring arm Bar feeder preparation Conveyor 3D Renishaw Probe Coolant gun Increased coolant pump Hainbuch Collet Chuck for Main Spindle 3 Jaw chuck counter spindle Various tool holders Documentation

welding current: max. 200 A open-circuit voltage: 14 - 24 V connected load frequency: 230 V weight: 25 kg Dimensions (LxWxH): 500 x 200 x 300 mm Equipment: Hose package Ground cable Welding nozzles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Interface for ...

Offered is a CNC lathe (sub-spindle, milling/C-axis, Y-axis). Equipped with bar feeder for balls 120mm, incl. Fanuc six-axis robot M-16iB with R-30iA control for automated loading and unloading as well as a bunker for raw material supply. Machine is operational. Inspection possible by prior arrangement.

This 3s Zoller SMC 4/4-00060 was manufactured in 2010. It features a measuring range of 215 mm on the X-axis and 415 mm on the Z-axis, making it suitable for high-precision applications. With a high-precision spindle SK-50 and additional features like a spindle brake and 4 x 90° spindle locks, consider the opportunity to buy this Zoller SMC 4/4-00060 optical measurement machine. Contact us for further details.

Power converter, power converter, controller, inverter, inverter, solar power converter -SMA: SUNNY MINI CENTRAL photovoltaic inverter -PAC nom: 8000 W -Dimensions: 610/480/H250 mm -Weight: 21 kg

Sensor module, incremental encoder -Manufacturer: Siemens, Sinamics Sensor Module SMC20 from vertical lathe Scherer VDZ 80 DS -Type: 6SL3055-0AA00-5BA1 -Number: 3x module available -Price: per piece -Dimensions: 115/50/H170 mm -Weight: 0.8 kg/piece

This 4-axis SPINNER TC800 110 SMCY was manufactured in 2016. It features a maximum X-axis travel of 360 mm and Z-axis travel of 900 mm, along with a sub spindle and live tool capabilities. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 110 SMCY horizontal turning machine we have for sale. Contact us for further details.

CONTROLS   CNC controls MITSUBISHI M720BM BASIC FUNCTIONS   number of spindles: 2   number of turrets: 1   live positions: yes   number of c-axes: 2 WORKING RANGE TURNING   swing diameter (max): 700 mm   turning diameter (max): 350 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   spindle bore diameter: 90 mm   c-axis: yes X/Z SLIDE   - rotation speeds (max): 6000 /min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 7500 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coolant unit: yes   hydraulic system: yes   European CE standards: yes Machine in a good condition The spindle guides need to be replaced. Machine equipment (1500.- CHF (below)): - 1x double face and longitudinal turning tool holder - 3x face and longitudinal turn ...

Year : 2001 Thermal stripping machine for cleaning parts covered with plastic, paint such as dies, nozzles, filters. The combustion chamber is heated to approximately 420 degrees. The metal parts to be cleaned are placed in a basket which is introduced into the preheated cleaning chamber. Perfect cleaning for a cycle time of 90 to 150 min. Dimensions of the cleaning chamber: diameter 220 mm and Length: 350 mm Dimensions of the basket : diameter 210 mm and length: 260 mm Dimensions (L x W x H) : 0,90m x 0,70m x 1,60m Weight : 120 kg

This 5-axis MORI SEIKI SL-153 SMC was manufactured in 2000. It features a maximum X-axis travel of 230 mm and Z-axis travel of 520 mm. The machine includes a hydraulic chuck system, chip conveyor, and multiple driven tool holders for enhanced machining capabilities. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-153 SMC horizontal turning machine we have for sale. Contact us for further details.

For sale is a high-quality CNC turning-milling center spinner TC77-SMCY with Siemens Sinumerik control. The machine is equipped with: Y-axis C-axis Sub-spindle powered tools Chip conveyor extensive tool package Technical data: Bar passage 77 mm 12-speed VDI50 turret Main spindle ASA 8 Sub-spindle ASA 6 Speed up to 4000 rpm Turning diameter approx. 500–690 mm Turning length approx. 800–900 mm Y-axis ±60 mm Main and sub-spindle Weight approx. 6000–7000 kg Nloc Egsy Uwmws S Rrgob