ROTOX fws used machines

Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Rotox Water Slot Mill

Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172

- technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed

Speeds: 6000 or 12000 rpm Processing: Steel or aluminium profiles Country of origin: Germany

Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 12,000 revolutions per minute 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg

A Rotox lock and copy milling machine including a small manual Dalex spot welding machine is available. Profile width: 125mm, profile height: 50mm, milling dimensions X/Y: 265mm/125mm, vertical/horizontal spindle speed: 12000rpm/9000rpm, machine dimensions X/Y/Z: 750mm/700mm/1700mm, weight: approx. 200kg. On-site inspection is possible.

Rotatable support table between 0° and 180°, thus 3-sided machining in one clamping 2 speeds, 6,000 or 12,000 revolutions per minute can be preselected, so that both steel and aluminium profiles can be machined 4 pneumatically controllable copying pins Pneumatic material clamping Minimum quantity spraying device Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: approx. 350 kg

Profile width min./max.: 50mm-130mm, profile height min./max.: 50mm-115mm, max. notching depth: 40mm, max. cutter diameter: 180mm, machine dimensions X/Y/Z: approx. 1000mm/1000mm/1250mm, weight: approx. 300kg. On-site inspection is possible.

Offer 26048 Technical data: - 3 sides – machining in one clamping for lock and PZ punches, - etc. to be milled out in aluminium / plastic / steel profiles - Operation via two-hand lever - Material clamping by pneumatic clamping cylinder - Manual profile bar turning device for 3-sided machining - Working range - x (landscape) 250 mm - depending on position - y (longitudinal) 90 mm - depending on position - z (vertical) 120 mm - max. Profile height depending on position approx. 120 mm - max. Profile depth 100 mm - Spindle speed approx. 6000 + 12000 rpm - Pneumatic connection 8 bar - Drive 400 V / 1.5 kW - Space requirements approx. W 650 x H 1550 x D 850 mm - Weight approx. 340 kg

Year: 2010 technically efficient, ready to work – after full service rotary table (3-sided profile machining) cooling and lubrication system copying template compressed air preparation station pneumatic clamps (4 vertical and 2 horizontal)

Year: 2009 - technically efficient, ready to work – after full service - discs: 500 mm - working length: 3700 mm - PC control (Windows XP) - online access - vertical and horizontal pneumatic clamps - automatic disc guards - roller feeder - support for longer profiles

A Rotox lock case milling machine with multi-spindle milling unit is available. Travel vertical/horizontal: 265mm/125mm, max. profile width: 125mm, max. profile height: 50mm, speed: 9000rpm, machine dimensions X/Y/Z: approx. 750mm/700mm/1700mm, weight: approx. 200kg. On-site inspection is possible.

A Rotox lock case milling machine with multi-spindle milling unit is available. Travel vertical/horizontal: 265mm/125mm, max. profile width: 125mm, max. profile height: 50mm, speed: 9000rpm, machine dimensions X/Y/Z: approx. 750mm/700mm/1700mm, weight: approx. 200kg. On-site inspection is possible.

Flange bearing, housing bearing, flange bearing unit -Manufacturer: PTI, flange bearing unit type FWS40U -Bore: Ø 40 mm -Mounting hole: hole spacing 102 x 14 mm -Number: 3x flange bearing available -Price per piece -Dimensions: 128/128/H50 mm -Weight: 2.2 kg/pc.

The LPG forklifts Manufacturer: Toyota Type: Tonero 35 Model No.: 02-8FGJF35 S/N: 8FGJF35-82059 Year of Make: 2022 Reading operating hours: 1,528 h Load capacity: 3500 kg Net weight: 4980 kg Lifting height: max. 3300 mm Power: 42 kW Equipment: full cab, duplex mast (height: approx. 2300 mm), hydraulic side shifter, hydraulic tine adjustment with extendable forklift tines is part of the ONLINE AUCTION of the Operating and office equipment of a window construction company   approx. 400 positions best. e.g. from: Hegla Maschinenbau GmbH & Co. KG LPLF Q15F, processing line for plastic profiles for window frames and frames Schirmer Maschinen GmbH, sash/frame assembly line Urban GmbH & Co. Maschinenbau KG, semi-automatic hardware assembly line Urban GmbH & Co. Maschinenbau KG, glass assembly line, glazing bead assembly line Urban GmbH & Co. Maschinenbau KG, manual v ...

We sell 300 x Juniper Router – SSR 120 (SSR 120AE) And we have available these systems in addition: 140 x iBASE Router - FWA6706D-4CF-AM (FWA6706D) 70 x Aaeon Router - FWS-2280-A10-CS-N0004 (FWS-2280) 50 x Lanner Router - NCA-1515B-WB1 - US (NCA-1515B) 35 x Silicom Madrid - 90500-0151-G11 (90500-0151-G11) 30 x Lanner Router - NCA-1515A-WB1 - US (NCA-1515A) 20 x Advantech Router - FWA-3033 (FWA-3033) 10 x iBASE Router - FWA8506-AM (FWA8506-AM) All systems in this broadcast are brand-new EU systems and in original packaging! In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the sy ...

PREZ-MET PVC and aluminium window production line is a state-of-the-art and comprehensive solution for the mass production of windows. The system enables complete machining of PVC and aluminium profiles within a single working cycle. The production includes all key stages – from precise profile cutting, through milling, drilling, welding to final cleaning of the elements. The PREZ MET window production center is made up of three smaller integrated production lines – one line for the production of window frames and two lines for the production of window sashes. They consist of machines from renowned manufacturers from 2005-2016: – ROTOX ZSA 263 cutting center – PREZ-MET FS 50 end milling machine – PREZ-MET 42 MP copy milling machine – PREZ-MET ZGP 420 four-head welding machine (3 pcs) – PREZ-MET ZGP 380E two-head welding machine (2 pcs) – PREZ-MET ZG 940 single-he ...

Complete production line (grouping of batches 2 to 6) Including: 1 x ROTOX 4-head welder SMK 506 from 2007 (lot 2) 1 x ROTOX 6-Head SMK 506 6K Welder from 2007 (Lot 3) 2 transfer tables: 1 single deburring front table of 3300 x 2500 mm 1 table with 4200 x 3800 mm deburring machine outlet 1 ROTOX EKA 577 deburring machine from 2007 (lot 4) 1 TECHNOROP MR102 opening plugger from 2007 1 TECHNOROP MR101 standing card with a tilting entry table 4200 x 2200 mm Warning: lot under allocation Quotation for dismantling and loading only on request Auction-ID: A1-47012-1