RIMA rs used machines

A used compensating stacker Rima Rs1012 S

Built in 2001 Size max 320 x 250 mm min 260 x 180 mm Pile height 330 mm max min 80 mm Infeed height 890 mm max min 860 mm Speed max 900 Pack. / h

Format max 470 x 320 mm format 152 x 127 mm power max 18,000 c/h Stack height 235 mm Stackhoehe Pre-stacking basket 124 mm ; ready for use

Size max 470 x 320 mm Weight 520 kg (approx.) Speed max 18.000 c/h Equipment o - special: post code identification ; working condition

Size max 470 x 320 mm Weight 520 kg (approx.) Speed max 18.000 c/h Equipment o - special: post code identification ; working condition

Size max 470 x 320 mm Weight 520 kg (approx.) Speed max 18.000 c/h Equipment o - special: post code identification ; working condition

Specifications of the straightening machine RM2300/8/9 Engine power in KW: 22KW Straightening machine width: 2300 mm Max directional width 2200 mm Straightening rollers Number: 9 pieces Straightening roll diameter: 95 mm Support rollers Number: 22 pieces Support rollers below: 12 pieces Support rollers on top: 10 pieces Sheet thickness max: 8 mm

Specifications of the straightening machine RM2300/8/9 Engine power in KW: 22KW Straightening machine width: 2300 mm Max directional width 2200 mm Straightening rollers Number: 9 pieces Straightening roll diameter: 95 mm Support rollers Number: 22 pieces Support rollers below: 12 pieces Support rollers on top: 10 pieces Sheet thickness max: 8 mm

Specifications of the straightening machine RM2300/8/9 Engine power in KW: 22KW Straightening machine width: 2300 mm Max directional width 2200 mm Straightening rollers Number: 9 pieces Straightening roll diameter: 95 mm Support rollers Number: 22 pieces Support rollers below: 12 pieces Support rollers on top: 10 pieces Sheet thickness max: 8 mm

Good working conditions

SPECIFICATIONS: Installed power: 2.5 HP Machining on both sides at the same time RPM: 12,000 rpm

was in operation for conveying cereals and salt (silo filling),, Screw diameter: 150 mm,, Emission height: approx. 3,000 mm., Dimensions / weight: LxWxH: 4.500x1.085x2.970mm

max. tensile force: 20 to, max. stroke 1250 mm, max. cutting speed: 7m/min, maximum return speed: 25 m/min. max. workpiece 580 mm, max. tool 90 mm, clearing: 2 pieces, round-clock table, automatic workpiece feeder device, year 1960

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

General information / technical data: mechanical vertical Interior Maschinein used excellent condition Tractive effort at 3 m / min: 4000 KG Space speed: 3 m / min Return speed: 6 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough: 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Power supply & power: 380 Volt 50 HZ / 2.2 / 4,5KW Optional accessories: • Thread cutting coolant/fluid pump • electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) • manual central lubrication • manual table 7 piece thorns Ã?20-(6), 25-(8), 30-(10), 40-(12), 48-(14), 50-(14), 60-(18)mmzur manufacturing of grooves in different angles (= Groove width of a thorn) Comment: The double spindle dr ...

Surface grinding machine. Magnetic chuck of 550x250mm. Table travel: 700mm. Grind surface area: 600x350mm. Max. height: 375mm. Cross travel: 300mm. Wheel: 350x127x50 / 300x127x100 Weight: 2900Kg.

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Cutter 65 ltr. CPL. Stainless steel mixing speed

Crack Control Panel type EOK Through light control for detection of hairline cracks in the foil before filling

Granulator Load area: 140x140 mm Overall size: 950x500x1300 mm Power: 2,5 kW Weight: 200 kg Technical data: • Designed for beside the press operation (injection and blow moulding) • 3 knives open rotor • Reversible hopper • Slow rotor speed (250 RPM) • Lateral end discs which turn with the rotor • Standard screen in stainless steel • Quick opening and easy cleaning Processes: • Injection • Blow moulding • Extrusion Designed for: • Small wastes from purgings and castings • Tubes and profiles with small diameter • Trimmings

N:18559 Date:27 12 85 Type:RSD 281 ratio: 4.704:1

MASSON MARINE GEARBOX RSD 201 / 3.978:1

BETEX 24 RSD - heated up to 150 kg Workbench model with swivel arm Applications: Chemical industry, steel industry, paper industry, transmission manufacturers, mechanical engineering, transport sector Voltage / Frequency / Power: 230 V / 50-60 Hz / 3.6 kVA Properties: When warming in a horizontal position, the maximum effect is achieved. Workpiece: Weight bearings max. 150 kg (other workpieces 80 kg) Inner diameter 15/120 mm Outer diametermax. 520 mm Width max. 200 mm Automatic temperature: Magnetic probe, control range up to max. 240 °C Aperture priority: Time range 0 to 45 minutes Bays: Edge length 14, 30, 60 mm

BETEX 24 RSD - heated up to 150 kg Workbench model with swivel arm Applications: Chemical industry, steel industry, paper industry, transmission manufacturers, mechanical engineering, transport sector Voltage / Frequency / Power: 230 V / 50-60 Hz / 3.6 kVA Properties: When warming in a horizontal position, the maximum effect is achieved. Workpiece: Weight bearings max. 150 kg (other workpieces 80 kg) Inner diameter 15/120 mm Outer diametermax. 520 mm Width max. 200 mm Automatic temperature: Magnetic probe, control range up to max. 240 °C Aperture priority: Time range 0 to 45 minutes Bays: Edge length 14, 30, 60 mm

MASSON MARINE GRAR BOX RSD 401 REDUCTION 4,625:1