paper converting: other used for sale

BOBST NOVACUT 106 E -Year 2016, Only one onwer -42 mil. Copies, 11.286 hours of work -Paper min.: 80 g/m² -Carton: up to 2,000 g/m² -Corrugated board: up to 4 mm -Max. format: 760 X 1060 mm -Min. format: 350 X 400 mm -Max. speed: 8,000 B/h - Die Cutting power: 2.6 MN -Gripper edge: 9-17 mm -Max. format: 746 X 1060 mm with Gripper edge -Embossing Format max.: 730 X 1060 mm -OS side guide -DS side guide -Quick locking -Non-stop delivery -Stripping Unit - Upper & Lowder stripping pull out tray -Push guide -Optical register sheet infeed -Double sheet control ultrasonic -Centerline -1 micrometric plate -1 plate 4 mms. -2 frames -Bobst Make ready table -In production every day, any test is possible, Available in September -Conditions: as new

Manufacturer: Markforged Model: X7 (Gen 2) Printer Properties: - Process: Fused Filament Fabrication, Continuous Filament Fabrication - Build Volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) - Weight: 48 kg (106 lbs) - Machine Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) - Print Bed: Kinematic coupling — flat to within 80 µm - Laser: In-process inspection, active print calibration, bed leveling - Extrusion System: Second-generation extruder, out-of-plastic and out-of-fiber detection - Power: 100–240 VAC, 150 W (2 A peak) - RF Module: Operating Band 2.4 GHz Wi-Fi Standards 802.11 b/g/n Part Properties: - Layer Height: 100 µm default, 50 µm minimum, 250 µm maximum - Infill: Closed cell infill; multiple geometries available Find more here - / Contact us at -

Manufacturer: Polatek Model: TLM 500 V4 Type of Machine : Thermo Laminating Machine Voltage: 3 x 400 V + N + PE Frequency: 50 Hz / 60 Hz Total Power: 8 kW Compressed Air: 6 bar / 250 l/min Find more here - / Contact us at -

Manufacturer: Canon Model: C10000VP Combined total of all pages printed (color + B&W) : 15516806 General Specifications Warm-up Time Less than 420 seconds from power-on. Interface Type - USB 2.0 Hi-Speed - Ethernet: 1000Base-T / 100Base-TX / 10Base-T - Standard: 2 USB host ports Network Protocols No print function Processor Speed 1.66 GHz (SOC ARM 1136JF-S 400 MHz, ARM 946 200 MHz) Memory 1.5 + 2.0 GB Hard Disk Drive Standard 250 GB hard drive Control Panel (EFI/Canon PS/PCL) Tilted Control Panel F1: 10.4-inch (26.4 cm) SVGA color TFT touch screen with LED backlight Control Panel (PRISMAsync) A4 Control Panel: 15-inch touch screen Dimensions (W x D x H) 2586 mm x 1152 mm x 1456 mm Installation Dimensions (W x D) 2586 mm (W) x 1971 mm (D) Weight Approx. 1200 kg Operating Environment - Temperature: 20 to 27 °C (68 to 80.6 °F) - Humidity: 15% to 60% relative hum ...

Manufacturer: HP Model: Scitex FB550 Year of Manufacture: 2017 Find more here - / Contact us at -

Block size press Müro 4x5000A4 WT; cleaned and tested; 1xDryer; Stack increase. Block gluing machine Müro 4x5000/A4 WT; cleaned and checked; 1x dryer; pile elevation.

GBC Roll Laminator Ultima 65 DIN A1 Hot lamination max. lamination width: 685 mm with standby indicator and consumer counter Automatic shut-off after 3 hours of non-use The tray and heat shield can be folded down to make it easier to replace the laminating rollers Bars with AutoGrip simplify the insertion and replacement of standard laminating rollers and prevent the roll from slipping during the lamination process thanks to AutoSpeed, the tedious process of setting the correct lamination speed is a thing of the pastwith the additional stop button on the back of the device, users have an overview of the finished laminate and can also stop the device from behind Easily controllable one-touch control panel with large buttons for start, stop and return - Sticks that are not in use can be easily stored in the brackets at the back of the laminator ...

for creating brochures up to 100 pages in one go. Paper feed format from DIN A5 to DIN A 3 - oversized format – with 2 stitching heads (expandable to 4) – Height-adjustable base frame To be relinquished due to dissolution of business

2 back clamps Stapler Due to the liquidation of the business.

Stitching machine Brehmer Leipziger Clamp across the machine Flat wire 0.8x0.65mm Arm length 700 mm Due to the liquidation of the business. Can be loaded on site with forklift.

Manufacturer: Ryobi Model: 3304 H Year of Manufacture: 1999 Details: - PCS-F remote control - RP520-220 F high precision register punch - ECO15 damping system - IR dryer - Super Blue Cylinder on delivery - Total Impressions: 18,892,380 - Currently disassembled into two pieces and placed on pallets - Unused for approximately 10 years Technical Specifications: - Printing Units: 4 - Max. Paper Size: 340 × 450 mm (13.39 × 17.72") - Min. Paper Size: 90 × 100 mm (3.54 × 3.94") - Plate Size: 335 × 485 mm (13.19 × 19.09") - Max. Printing Area: 330 × 438 mm (13 × 17.24") - Printing Speed: 3,000–10,000 sheets/hour - Feeding System: Universal feeder - Delivery System: Chain delivery - Blanket Type: Aluminum bar blanket - Dampening System: Continuous (RYOBI Super Dampener) - Control: PCS-F remote control - Accessories: RP520-220 F register punch, ECO15 damping, IR dryer, Super Blue C ...

Manufacturer: Konica Minolta Model: Bizzhub Press C6000 Year of Manufacture: 2013 Condition : Used , but in good condition Includes standard CMYK toner only (no additional consumables) Find more here - / Contact us at -

Main Unit: Wohlenberg 185 Guillotine Cutter Manufacturer: Wohlenberg Model: 185 Year of Manufacture: 2004 Test Piece Diameter: 10 mm Curtain Separation Distance: 400 mm Maximum Stopping Performance: ≤ 318 ms Included Equipment: - Baumann NUP2000 Pile Lifter Manufacturer: Model: NUP2000 Technical Specifications: - Voltage: 400 V (3-phase) - Frequency: 50 Hz - Load Capacity: 20,000 N - Power Consumption: 3.2 kW - Current Draw: 7.4 A - Circuit Diagram No.: 625.00 Technical Specifications: - Voltage: 400 V (3-phase) - Frequency: 50 Hz - Load Capacity: 20,000 N - Power Consumption: 3.2 kW - Current Draw: 7.4 A - Circuit Diagram No.: 625.00 2.Baumann BA7 Stacker Manufacturer: Baumann Model: BA7 Technical Specifications: - Voltage: 400 V (3-phase) - Frequency: 50 Hz - Load Capacity: 5,000 N - Power Consumption: 0.6 kW - Current Draw: 1.6 A - Circuit Diagram No.: 592.065D  ...

Manufacturer: Konica-Minolta Model: AccurioPrint C4065 Year of Manufacture: 2023 Condition : good Equipment: - hybrid banner feeder up to max. 330x762mm - manual feeder up to max. 330x1300mm - scanner cover - delivery of d. capacity with sorting - Humboldt controller Find more here - / Contact us at -

Perfect binder Master e Connecting bridge Speed: 1,000 - 6,500 cycles/hour Dedusting station with suction nozzle Output max.: 1,000 - 6,500 cycles/hour Product height: 140 - 435 mm Document width: 75 - 370 mm Speed (inline): 1,000 - 8,000 cycles/hour Gathering machine Sprinter 7010 (16 stations) 16 gathering stations Control: PLC Heavy Duty Back Machining Tool 18 brackets Furniture for small format Pressure station Electronic double-sheet inspection Product width: 105 - 320 mm Min. paper weight: 70 g/m² Fault sheet inspection Main milling machine Folding station Creasing station Cross-stack delivery Product thickness: 2 - 62 mm Manual docking station Max. layer thickness: 3 mm Clamp opening: 12 - 90 mm Hot Melt Back Tying Station PUR back binding Hot Melt Side Binding Station Envelope feeder  ...

• Make: PLC • Type: Vitessa Star G2 • Year of manufacture: 2001 • Machine No.: 10001161 • Printing method: Automatic cylindrical screen printing machine with stop cylinder principle • Max. sheet format: approx. 790 x 1040 mm • Min. sheet format: approx. 315 x 440 mm • Material thickness: 0.1 – 0.8 mm • Print speed: up to 4,000 sheets/hour •Characteristics: - Fast screen change due to pneumatic clamping - Central 3-point fine adjustment - Robust machine base for industrial print production Components • 1x assembly unit – Mabeg PAL 3 (built in 2001) • 1x dryer – Svecia SHJD (built in 1985) • 1x destacker – Svecia SAP-A (built in 1985) • 1x UV burner with control unit

• Manufacturer: Hang (Constantin Hang GmbH) • Model: DT 106 (also known as 106 DT) • Machine Type: Paper Drilling Machine / Paper Punching Machine • Drilling spindles: 2 pieces, adjustable • Drilling diameter: 3 – 20 mm (standard up to 14 mm, optionally with hollow shank up to 20 mm) • Table size: approx. 110 × 68 cm (width × depth) • Max. drilling distance from the edge of the paper: up to 470 mm (face hole approx. 300 mm) • Max. stacking height: approx. 70 mm • Operation: Foot pedal (electric) • Connection: 380–400 V three-phase (3-phase) • Machine weight: approx. 250 kg • Condition: Used, technically checked, ready for immediate use

The SF-80 impresses in particular with its large pre-stacking capacity of around 450 mm. The envelopes are pre-stacked upright and separated by a special suction head. The transport takes place without deformation of the material. Delivery conveyor

2 Spindle Paper Drilling Machine

Manufacturer: ZX Model: 450 Year of Manufacture: 2019 Type: Intermittent Label Offset Printing Machine Printing Speed: 50–180 T/min (times per minute) Maximum Printing Length: 380 mm Maximum Printing Width: 450 mm Power Supply: 380V, 3 Phase CE Certified Shaftless Fully Servo Driven by Rexroth Quantity: 1 set Includes: - Unwinder with BST web-guiding system - One flexo unit - Five-color offset printing units - One flexo delam/relam unit - Seven UV dryers from UV Light - One corona treatment system - Ink remote control for offset unit - Touch screen control panel - 2nd pass sensor - BST video inspection system - Chilling system - Plate punching machine - Standard tools and spare parts Can also include a Die cutting machine (ZM 450) Model: ZM-450 Type: Rotary / Semi-Rotary Label Die-Cutting Machine Max Die-Cutting Speed: - Rotary: 120 m/min - Semi-Rotary: 65 m/min Max  ...

1-stitching head machine AGRAFIX BX Saddle stitching (swivel table) Stapling thickness 1 sheet up to 25 mm with backwards folded staples Grooving (stitching) up to 40 mm thick Clamp width 14mm Round Wire No. 30-21 + Flat Wire No. 0-V Projection 320 mm Stapling table 610 x 200 mm Dimensions W65 x D70 x H160cm Packaging dimensions W80 x D90 x H180cm, 240/300kg Drive 220/380 Volt, 50Hz, 1/3 HP

Manufacturer: Agfa Model: Anapurna H2050i LED Year of Manufacture: 2017 Rated Voltage / Current: - 230V AC, 3-phase: 3×40A - 380V AC, 3Y+N: 3×30A Rated Frequency: 50Hz / 60Hz Conveyor belt has been changed .The printer is operational; however, the white ink channel is not functioning. Find more here - / Contact us at -

Manufacturer:Jurmet Model: REWER Year of Manufacture: 2014 Condition: Used Technical Specifications - Weight: 2,000 kg - Power Supply: 14 kW - Voltage: 3x400 V - Air Pressure Required: 7 bar - Rewind Material Types: OPP, PET, PVC, OPS, LDPE, 40–50 µm cardboard - Material Width: 500 mm - Winding Speed: 0–400 m/min - Max Winding Diameter: 800 mm (1 shaft, core Ø76 mm) - Max Unwinder Diameter: 800 mm (1 shaft, core Ø76 mm) - Max Roll Weight: 400 kg - Wind Direction: Left to right / right to left (bi-directional) Included Features - Separate lay-on shafts: 2 pcs (rewinder and unwinder) - Ultrasonic web guide system - Splice table with waste rewinder - Rotary knife slitting module - Touchscreen control panel - Adapter diameter: 152 mm (2 pcs) - Stroboscope with tape control sensor Find more here - / Contact us at -

Manufacturer: EFI Reggiani Model: UNICA 180 Year of Manufacture:2019 Type of Machine: Rotary Screen Printing Machine Working Width: 1850 mm Printing Heads: 8 rotary printing heads Drying System: 4-Chamber Gas Heating Find more here - / Contact us at -

Manufacturer: EFI Reggiani Model: ReNOIR 180 Year of Manufacture: 2021 Machine Type: Digital Printing Machine Working Width: 1850 mm Printing Heads: 32 Heating System: Gas heating with 2 chambers Compliance: CE Certified Condition : In working condition Find more here - / Contact us at -

A 2020 Zünd LEVEL 1” machine is a digital cutting system from the Swiss manufacturer Zünd, known for its precision, modularity, and automation capabilities. - A modular flatbed cutter designed to cut, kiss-cut, crease, route, and more across various materials like textiles, foam, composites, plastics, and even light metals reddit+10anz.cpp.canon+10mroevents.aviationweek+10. - LEVEL 1” denotes Zünd’s entry model in their modular lineup—designed for professional use, offering flexibility but with a narrower feature set than higher-end models like G‑Series or Q‑Line . – Software 2.7.10 – KCT,UCT, EOT 250, DRT – 13046 hrs Find more here - / Contact us at -

Pile turner Rachner R 1000 PA; cleaned and tested; Load capacity 1000kg; Format 1200x800mm; Ventilation; Max. Opening width 1300mm. Pile turner Rachner R 1000 PA; cleaned and checked; lifting capacity 1000kg; size 1200x800mm; airing; max.pile hight 1300mm.

- Manufacturer: M&R - Model: SPORTSMAN E - Year of Manufacture: 2007 - Print format : 51x51 cm - 12 stations - 10 print heads and 2 M&R Tacana Flash - Servo-driven index (motor-driven rotation of the pallets, both ways! Not compressed air!) and AC-driven pressure and return squeegees, - (i.e. motor-driven, not air cylinders!) with front and rear pressure length adjustment, compressed air turning of the pressure and return squeegees. - M&R TriLoc registration of the frames, optical T-shirt detector, foot pedal, etc. - Lots of pallets in different sizes. Find more here - / Contact us at -

Manufacturer: M&R Model: Sportsman EX Year of Manufacture: 2022 12 stations with 2 tacan Flash and a lot of other equipment, almost unused M&R’s Sportsman EX presses are the benchmark in mid- range automatic screen printing presses, combining quality components, leading class craftsmanship and high speed production to give you one of the finest presses, at an amazingly affordable price. With electric printheads, tool-free squeegee/floodbar angle adjustments with air locks, pneumatic frame locks, and independent squeegee/flood speeds with digital display, it provides operators with all the time-saving features needed for quick setups. And like all M&R presses, the Sportsman EX is Tri-LocTM / Tri-SyncTM compatible, which further minimizes setup times and maximizes run times and productivity. Find more here - / Contact us at -

FAST AND UNEXPENSIVE HORIZONTAL BAGGING ITALDIBIPACK SPEED BAG H Ideal for wrapping and mailing newspapers and magazines, catalogues and wholesale publications, and any commercial printed materials in A4 size in singlepack. Half-automatic, easy to use: the only thing the operator has to do is simply to feed products horizontally onto the infeed conveyor belt that carries them towards the sealing area. Here a special device will clamp product and film together and push them through sealing and cutting operations. A bag is formed around the product by the adjustable width folding plates. The bag is then sealed and cut according to the product length. -Year 2007 -Power required: 2 KW, Power supply: 230 V – 50/60 Hz – 1 Ph -Weight: 150 Kg -Min wrapping size L x W x H: 150 x 105 x 1 mm -Max wrapping size L x W x H: 297 x 210 x 10 mm -Film roll width: 500 mm -Output up ...