We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Advanced Search
Not mandatory fields!
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
approved
dealer
dealer
2,500 liter storage tank made of V2A Properties: Volume 2500 L Material V2A (AISI 304) 1.4301 Total height 3000 mm Cylinder height 2000 mm Diameter 1350 mm Number of feet 3 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Topsoil: Cone base 2 crane eyes CIP ball in the middle Threaded Sockets Sensor for level measurement Tank cylinder: Manhole 440 x 340 Sensor for level measurement CIP ball over manhole 2 x Threaded Socket DN 50 Filler neck DN 80 Subsoil: Cone base Sensor for level measurement forward-drawn residual drain pipe with disc valve DN 100 3 trumpet feet with domes, height adjustable with washers
approved
dealer
dealer
6,930 liters of cream tanks / cream tanks with V2A agitator insulated Properties: Volume 6930 L Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Insulation 80 mm Total height 2500 mm Cylinder height 1250 mm Inner diameter 2600 mm Outer diameter 2760 mm Number of feet 4 Vertical design Description: Topsoil: Cone base 2 x crane eye Threaded Sockets 2 x CIP Ball Manhole Ø 510 mm Agitator motor with reinforcement profiles Ventilators Tank cylinder: Paddle agitator Dip shaft sleeve for temperature display Subsoil: forward-drawn residual drain pipe with disc valve 4 feet with dome height adjustable
approved
dealer
dealer
1,100 litre turbo stirrer/ turbo mixer made of V2A
approved
dealer
dealer
6,000 liter cream tanks / cream tanks with agitator made of V2A insulated
approved
dealer
dealer
1.140 liter turbo stirrer for spray cream 3 pieces with mixing table Condition: Used Description Consists of 4 parts with pedestal Part 1/4 Mixing Table Dimensions: Length: 1,750 mm Width: 800 mm Height: 1,300 mm Part 2/4, 3/4, 4/4 per container with a capacity of 1,140 litres Dimensions: Total height: 2,600 mm Cylinder height: 1,000 mm Inner diameter: 1,100 mm Description of containers: Topsoil: Clapper bottom Propeller agitator Inlet pipe Connector with white lid Subsoil: Cone base Residual drain pipe connected to pipe 4 fixed feet each on frame Properties: Volume 3420 L Volume container 1 1140 liters Volume container 2 1140 liters Volume container 3 1140 liters Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 2600 mm Width 2000 mm Length 6000 mm Number ...
approved
dealer
dealer
Aircooled chiller EMICON RAE 251 KC 26.7 kW Cooling capacity: 26.7 kW / 7.59 tons (12/7 — 35°C) Year of manufacture: 2019 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Panasonic C-SBN373H8H (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump Lowara 5HM03P05T5RQQEXD, expansion vessel, buffer tank 140 l. Dimensions: 2.0x1.0x1.41 m. Weight: 560 kg. Working hours: 25/25 h. Condition: Outlet
approved
dealer
dealer
For banding bottles or folding boxes 90° infeed Grouping by hand over device Bottle infeed with 2 screws (adjustable to each other) for shaped bottles, grouped from single infeed lengthwise to 6x crosswise With 2 format screws for shaped bottles 63.5 x 32.5 x 108 mm and 67 x 38.5 x 114 mm Folding box infeed conveyor Translator with one gripper each for bottle and one suction plate for folding boxes for PE film film width 30 - 450 mm film thickness 0,025 - 0,1 mm Roll diam. max. 320 mm Output max. 50 cycles/min (packs/min), format/product-dependent Format range product 30-100 x 30-100 x 60-250 mm [L x W x H] / pack 30-300 x 60-380 x 60-250 mm [L x W x H]. Film splicer for automatic film change without machine stop Machine control Siemens S7-300 Control system drives Elau Schneider PacDrive 3 Error messages indicate no com ...
Skid mounted aluminium Benhil through with augers with drivework for the augers, small control panel with controls, fench protection above the through with augers for safe working and mobile outfeed Waukesha 034 lobe pump with motor ( ± 5,5 kW, estimated no name tag) and motorcover. Pump displacement per revolution: 0,227 liter. Pump maximum nominal capacity: 5.500 ltr/h. Pump inlet, rectangular, 1,75 x 6,75 / 44,5 mm x 171,5 mm and outlet, round, 2 / 50,4 mm. Pump maximum pressure range: 200 psi / 13,8 bar. Pump max speed: 400 rpm., Type of Machine: Through with augers with butterpump, Motor lobe pump: +/- 5,5 kW - 380 V - 50 Hz, Total dimensions: 120 x 120 x 210 cm, Weight: 200 kg
Fully reconditioned skidmounted Stephan UMM/SK 80 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. The bowl is equiped with a double jacket for heating / cooling on the jacket including all valves, 3x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, 2x cutting blades, maximum working pressure in the bowl -1 / 1,5 bar (protected with overpressure valve), maximum temperature in the bowl 127 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid for a hopper (hopper itself excluded), mounted on the lid a scraper agitator for the wall, electric driven (0,55 kW - n1: 1.435 rpm - n2: 29 rpm), 3 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl for empyting, h ...
Fully reconditioned skid mounted Stephan UMM/SK 130 E Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. The bowl is equiped with a double jacket for heating / cooling on the jacket including all valves, 4x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, 2x mixing blades, maximum working pressure in the bowl -1 / 2 bar (protected with overpressure valve), maximum temperature in the bowl 120 °C, vacuum connection on the bowl, dearation connection on the bowl, infeed connection on the lid for a hopper (hopper itself excluded), mounted on the lid a scraper agitator for the wall, electric driven (1,1 kW - n1: 1.400 rpm - n2: 29 rpm), 3 manual tightening clamp, pneumatic outfeed valve for the product, so not needed to tilt the bowl for empyting, hyd ...
Foil wrapping machine, double head, which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is stick format: 100 gram, 100 x 35 x ± 30 mm, side folded. Capacity: up to 220 portions per minute (depending on product, viscocity and packaging materials). The butter is feed with an aluminium through with aluminium augers. Stainless steel dosing station with compensator, CIP cleanable. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor. Protection cabinet around the machine with stainless steel doors and polycarbonate windows around the machine. CE marking. Control panel with Siemens S7-400 PLC and on the machine an Operation panel with Siemens Simatic HMI. Production hours: ± 8.428 hours., Type of Machine: Butte ...
Benhil 8304 foil wrapping machine for hotel portions which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. This machine was serviced by the previous owner and is in a as good as new condition with new controls with frequency converter (renewed in 2024/2025) and extended with a home made semi automatic case packer. The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed by a hopper with agitator screw inside, mechanically drive from out of the main machine. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil (correct by brake system with servo). If there is no foil in the 1st cell, after cutting t ...
Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...
IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed ...
The Used Automatic Bottle Washer ATES Giorgia 8000 bph is a continuous motion industrial bottle washing machine designed for the intensive cleaning of glass bottles both new and recycled within beverage bottling lines The construction and configuration of this unit reflect a focus on reliability cleaning efficiency and ease of integration into existing glass packaging lines particularly for medium and large scale production environments The heart of the ATES Giorgia system is a robust mechanical structure supporting a continuous transport chain that securely holds and conveys bottles through multiple processing stations The washing cycle is engineered to ensure thorough removal of internal and external residues labels and other contaminants that are commonly found on returned bottles intended for re use Bottles are loaded onto the machine and progress automatically through various sequen ...
Used Automatic Rotary Labeling Machine BRB GLOBUS 4200 bph The Used Automatic Rotary Labeling Machine BRB GLOBUS 4200 bph model MEGA ADE 633 CCW applies self adhesive labels to glass bottles with precision Moreover BRB GLOBUS manufactured this machine in 2009 ensuring it operates at 4200 bottles per hour bph It remains fully functional and ready for installation in a production line Structural and Dimensional Features The Used Automatic Rotary Labeling Machine BRB GLOBUS 4200 bph measures 2550 mm in length 1800 mm in width and 2050 mm in height with a net weight of 1800 kg Additionally its mechanical structure provides stability and precision during the labeling process The machine rotates clockwise which optimizes workflow in industrial production lines Furthermore the movement system operates using mechanical cams allowing precise control over bottle movement throughout the labeling pr ...
RÜHLE FROZEN BLOCK CUTTER, TYPE GFR 450 Technical description: Guillotine for cutting frozen meat and other types of frozen blocks such as frozen fish blocks, frozen blocks of vegetables and fruits to minus 20 degrees Celsius. The Ruhle guillotine achieves a capacity of up to 3000 kg/h and has also been adapted for inclusion in the technological line. The device has been equipped with 4 vertical cutting knives, which allows fine shredded cut block. A separate container for felling and very accurate feeding of the trolley to the finished product minimizes the loss of raw material. Maximum cut dimensions of the block: 450×250 (mm)
GRADING - WEIGHING MACHINE, MAREL PROLINE, TIPO: GRA-PR30-04 Technical description: Serial number: A064049 Number of stations: 4 Power supply: 220/240 V - 50/60Hz Conveyor band: Intralox series 1650 ftpp b = 305 Conveyor width: 305 mm Total dimensions: 4900 x 1300 x 1650 mm
BREADING MACHINE MAREL TOWNSEND FURTHER PROCESSING B.V., MODEL: TRM 630 Technical description: Marel Townsend Further Processing B.V. rolling machine. Model TRM 630 Type 472640 Serial number 10096047 Plastic belt, belt width: (2x) 630mm Total dimensions: 2050mm x 1300mm x 2100mm
CAN SEAMER SOMME, MODEL: 444, ¼ CLUB FORMAT Technical description: With protective fairing Throughput rate: ± 80/90 Jars/min Power supply: 380-440V/50-60 Hz