REHNEN sk used machines

technical details: - motor band oscillation - pneumatic belt tension - small support table on the pulley - Swivel range grinding track rear wall: 90° - 180° - Dimensions grinding track back wall:850 x 150 mm - Grinding track back wall glued with a graphite sliding lining - Band size: 150 x 2,280 mm - Steel table adjustable in height by spring pressure - Table size: 750 x 350 mm - Belt speed: 22 m/sec - Roll diameter: 140 /80 mm - Diameter suction nozzle: 100 mm - Bracket (included) - Miter stop (included) - Switch-plug combination - Motor protection and main switch according to VDE - Dust tested (GS) Holz-BG-Stuttgart (when connected to an extraction system with an air velocity of at least 20 m/sec) - Weight: 200 kg Sound power level (DIN EN ISO 7346) - No-load: 91 dB(A) - Processing: 91 dB(A) Workplace-related emission value (DIN EN ISO 11202) - No-load: 83 ...

Oscillation: ja ja / nein : ja ja/nein : ja ja/nein tiltable up to: 45/90 Grad Motor output: 3 kW Table dimensions: 750x350 mm sanding width: 150 mm Weight: 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

mobile, with lockable castors Table size 2000 x 1550 mm swivel horizontal-vertical Extension to height-adjustable possible on request

table length: 2000 mm table width: 1000 mm stroke height: 400 - 1010 mm weight max. in kg: 300 kg weight of the machine ca.: 220 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 100 mm material thickness: 15 mm no. of straightening rolls: 9 straightening feed: 7 m/min total power requirement: 0,75 kW weight of the machine ca.: 380 kg dimensions of the machine ca.: 710 x 920 x 1360 mm Features: - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 800 mm² - Mobile use on casters - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is a space-saving and gentle solution for storing painted workpieces. The four swivel castors mean that it can also be used for transporting workpieces. Its solid tube frame design can be adjusted between 200 mm and 2,000 mm. With 17 inside and outside plastic-coated support tubes on each side, the rack can support up to 400 kg of evenly distributed weight. The plug-in inside and outside support tubes can be taken out and re-inserted as needed. When not in use, the drying rack can be collapsed and takes up minimal space.

colstress holder SK50 with inner suit thread In a suitcase with collets according to photos Special price Lid Hermle Weiler Meuser Kunzmann Wanderer Ruhla Weipert Wohlenberg

Praezision clamping tool Kombi plug-on pins BestNo. 1052-018 2 stub SK60x40x27 Unused and ovp 1 x as good condition Only against bid! Special price

Well preserved skin machine from Quickpack. Out of order, dazed because of new assortment. Price incl. VAT Can be tested on site. Price incl. VAT Skin packaging avoids complaints and thus protects your good reputation, saves time during control in order picking and is also extremely sales-promoting. Your products – even high and low – are firmly sucked onto a carrier material in the form of a special cardboard with a film and firmly placed on it. This is how you store and deliver dust- and scratch-free with a quickPack skin machine. The customer receives a perfect overview of the packaged goods or kit upon receipt. This not only saves the customer a lot of time, but also allows him to check the delivered goods for completeness immediately and easily. With your own company logo that can be printed on the skin boxes, the packaging is the ideal presentation of your good name ...

Skin area: 345 x 495 mm Part size: Max. approx. 120 mm Carton size: 345 x 495 mm Film width: 390 mm Including roller punch / cylinder punching machine Illig ZSM60 Contact details for ordering SKIN foil and cardboard available. Prior sale reserved - errors possible. Internal Reference Number: D-1149

Collet holder, tool holder, tool holder, milling holder, milling tool -Collet holder: SK50 -Type: SK50 D32 A71 CNB-01 -Tensioning sleeve: Ø 25 mm -Dimensions: Ø 98 x 200 mm -Weight: 3.5 kg

Tool holder, milling holder, milling tool, -Manufacturer: May, milling adapter: SK50 with fine adjustment -Type: FGK3/SK50/N M14-M30 -Dimensions: Ø 98 x 300 mm -Weight: 5.9 kg

Tool holder, milling holder, milling tool, -Milling adapter: SK50 -Type: 50x32x200 M24 -Dimensions: Ø 97 x 140 mm -Weight: 2.7 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Inside holder: Ø 26 mm -Dimension: Ø 100 x 220 mm -Weight: 5.8 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Recording inside: Ø 28 mm -Weight: 2.9 kg/piece

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK4 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 6 recordings available -Price: per piece -Dimensions: 240/95/H95 mm -Weight: 3.0 kg/piece

Tool holder, milling tool holder -Adapter -Recording: SK50 -Recording tool: 2x MK3 1x MK2 -Drill chuck reducing sleeves spindle tool -Price/Sale: complete -Weight: 9 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 31 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 220/95/H95 mm -Weight: 3 kg/piece

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 210/95/H95 mm -Weight: 3 kg

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK2 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 190/95/H95 mm -Weight: 3 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 40 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK4 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 1 recording available -Dimensions: 230/95/H95 mm -Weight: 3.2 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available Price: per piece -Dimensions: 220/95/H95 mm -Weight: 4.5 kg/piece

Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 50 x 55 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg