PIETRO CARNAGHI ac used machines

faceplate diameter: 1000 mm swing diameter: 1400 mm turning height: 1400 mm control: SIEMENS 850M total power requirement: 125 kW weight of the machine ca.: 38 t dimensions of the machine ca.: m Stocknumber 1020042 Type of machine CNC VTL Make PIETRO CARNAGHI Type AC 10 CNC Build in 1987 Type of control Siemens 850 M/E Faceplate diameter 1000 mm Max. Swing diameter 1400 mm Turning height max. 1400 mm Total Power (KW) totaal 125 Lenght (mm) 11000 Width (mm) 8000 Height (mm) 6000 Weight 38000 kg Additional information with driven tools with pallet changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Vertical Lathe PIETRO CARNAGHI Model AP 140 TMY Year: 2013 Never used Table Diameter: 10000mm Max. swing: 14000mm Max. loading on table: 500t Max RPM: 0.2-35 Turning height: up to 8900mm CNC Siemens 840D Ram size: 600x600mm Ram stroke: 4000mm Milling head power: 100kW Machine is packed in containers and ready for shipment. The machine was assembled by manufacturer, tested, disassembled and shipped to the buyer. And was never installed after that.

Ø board: 1,800 mm Maximum working ø: 2,000 mm Max. Turning height: 1,250 mm Max. weight on the table: 15 tons X-axis: 2700 mm Z-axis: 1200 mm Axis C 360 ° Table speed: 3 - 300 rpm Board engine: 60 kw RAM: 250 x 300 mm Work progress: 0 - 2000 mm/min. Nc: FANUC 15 T SERIES ATC: 50 ISO 50 tools Total weight: 58 ton

Used machine in good condition. Available for immediate delivery. - Control: SIEMENS 840 D - Axes: 2 - Cutting feed rate (X x Z): 0.1 - 3.000 mm / min - Power of driven tool: 37 kW - Weight: 25 t

faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1500 mm Control: SIEMENS 840 D workpiece weight max.: 5000 kg ram head dimension: 250 x 250 mm table turning speeds: 1 - 320 U/min power capacity - table: 100 kW Torque: 31784 Nm 0: 218 kw weight of the machine ca.: 55 t Dimensions: - Turning diameter on the faceplate 2000 mm - Faceplate diameter 1800 mm - Turning height with turning head L100 1500 mm Power on the ram: - Clamping force of tool holder or accessories 120,000 N - Max. Feed force Z and X axis 30,000 N - Drive power of the milling, drilling and grinding spindle 37 kW - Speeds for turning 10 - 3000 rpm Travels: - Axis X, horizontal support on the crossbeam -2270/+2275 mm - Axis Z, vertical support on crossbeam 1250 mm - Axis C, table rotation 360° Feed speeds: - Axis X 15,000 mm/min - Axis Z 15,000 mm/min - Axis C 3.25 rpm Coolant system: - Coola ...

faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1270 / 1120 mm Control: SIEMENS 840 D workpiece weight max.: 5000 kg ram head dimension: 250 x 250 mm table turning speeds: 1 - 320 U/min cross rail - adjustment: 400 mm ram head - cross travel: (X) -2770 / +2275 mm ram head - vertical travel: (Z) 1250 mm c-axis: 360° (0,001°) deg milling drive: 37 kW turning speed range - milling: 10 - 3000 U/min power capacity - table: 100 kW Torque: 31784 Nm feed range: (X/Z) 0,1 - 15000 mm/min total power requirement: kW weight of the machine ca.: 55 t dimensions of the machine ca.: m Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilli ...

faceplate diameter: 10000 mm swing diameter: 14000 mm turning height: 8000 mm Control: Siemens Sinumerik 840 D workpiece weight max.: 500 t faceplate turning speed range: 0,2 - 35 U/min drive motor: 300 kW ram head dimension: 600 x 600 mm max. ram stroke: 4000 mm milling drive: 100 kW hob turning speeds: 3000 U/min rapid traverse x + z axis: 10 m/min total power requirement: - kW weight of the machine ca.: 350 t Machine has never been used and is still original, seaworthy packed and stored. equipped with: - CNC control Siemens Sinumerik 840 D - Hydrostatic axes - Hydrostatic table - Milling device - Hirth couplings for tool holder Acessories: • VERTICAL HEAD ISO50 BIG PLUS AD 8T5060164 • VERTICAL HEAD ISO50 BIG PLUS AD 6000RPM 8T5060165 • HORIZZONTAL HEAD ISO50 BIG PLUS 8T5060163 • UNIVERSAL HEAD TU-50- ISO50 AD BIG PLUS 8T5060171 • HEAD DANDREA UT-8-800-S 8T5060166 • TOOL HO ...

for Schütte SF 32 - bar length 4 m -, Country of origin: Italy, Number of spindles: 6

Extendable spiral mixer PIETRO BERTO, type: Pegaso 340L - Machine suitable for up to 340 kg dough or approx. 200 kg flour - Including 3 tank cars - Including lifting tipper - EL. Connection: 3x 400 V, 50 Hz, 9.3 kW, 19 A - Net weight: 1,185 kg - Machine technically tested and ready for immediate use Visits and test runs are possible by arrangement.

Table diameter: 2,000 mm Max diameter of workpiece: 3,000 mm Main drive: 60 KW Speed rotation of the table: 2.8 - 162 rpm Max workpiece height under the cross member: 2,500 mm Travel RAM: 1,750 mm Tool magazine: 12 workstations Machine Weight: 35 t Accessories: Grinding spindle and various tool holders 3000 rpm Wheel diameter 250 mm

faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1190 mm Control: Siemens type: 840C max. ram stroke: 1250 mm Tool changer: 12 Pos Table load: 9000 kg cross rail - adjustment: 800 mm turning speeds: 2,5-250 U/min rapid traverse: 4 m/min total power requirement: 55 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 3,95x3,6x5,56 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Portal milling machine MARIO CARNAGHI

Manufacturer:Mario Carnaghi Model: TGF 10/1850 Year of Manufacture: 2000 Type of Machine : Vertical Lathe Technical Specifications: - Table Diameter: 1450 mm - Max. Swing Diameter with Vertical Slide: 1800 mm - Max. Turning Height on Table: 750 mm - Main Spindle Drive Power (AC Motor): 164 kW (variable 720 U/min) - Table Speed Range: 3.5 - 325 RPM - Max. Table Torque: 42,270 Nm - Vertical Travel - Right Slide (“Z2” Axis): 800 mm - Slide Section Size: 250 x 250 mm - Rapid Traverse - Z2 Axis: 15,000 mm/min - Horizontal Travel - Right Slide (“X2” Axis): 2907.5+120=3027.5 mm - Vertical Travel - Left Slide (“Z1” Axis): 800 mm - Horizontal Travel - Left Slide (“X1” Axis): 2990+120=3110 mm - Traverse Above Center (“X1”, “X2”): 120 mm - Axis Feed Rate (X1/X2): 15,000 mm/min - Axial Thrust: 5800 daN - Tool Clamping Force: 5000 daN - Milling Spindle Drive Power: 30 kW  ...

Carnaghi Ø 1700 mm CNC Chuck dia.: 1600 mm Max turningdia -- passage: 1700 mm Max hight of workpiece Z-axis: 1000 mm Command: E.C.S CNC 2600 Turret: yes Qty Tools: 7 Coolant pump: yes

Carnaghi ABH 1550 - Ø1600 mm Chuck dia.: 1200 mm Max turningdia -- passage: 1400 mm Max hight of workpiece Z-axis: 1000 mm Command: E.C.S CNC 1400 TOOLING: yes Turret: yes Qty Tools: 7 Coolant pump: yes

AGFA AccuSet 1000 WE. System is completely tested and cleaned. Resolutions: 1200, 1800, 2400 and 3000 dpi - including Techkon film densitometer. We will be happy to send you further information and pictures. Available now

To check torque on air and electric screwdrivers.

ACT activated carbon adsorbers should always be equipped with Kaeser filters. Installed as pre-filters and post-filters, they ensure the maximum service life of the activated carbon and keep carbon dust out of the cleaned compressed air – with very little pressure loss. Generous filling quantities of high-quality activated carbon and their permanently low pressure loss make them particularly economical. This means that they can withstand up to 12,000 compressor operating hours without changing activated carbon. A standard oil indicator indicates possible malfunctions. Residual oil contents in the concentration range 0 – 0.01 mg/m³ Volume flow 1.60 – 155.50 m³/min Maximum operating pressure 10 bar / 16 bar and as an option also 45 bar

electric servomotor, electrical actuator for sale. 3 pieces available, 2x original packaging, 1x without

New CNC working machine brand: Cosmec Type: Smart 30, 5 Achsen Configuration example: other equipment possible on request The smart serie: - Flexibility through cantilever construction - Best equipped for door processing - Protection by laser system (instead of step mats) - Especially good for machining light / small workpieces The controlling: OSAI CNC system control + Aspan CAD-CAM software: - Aspan uses simple commands to execute the machining process - By entering dimensions you can precisely position the machining operations - The machining operations are displayed on the virtual workpiece. - Diverse macros facilitate programming (of holes, slots, linear milling, arc milling...) Aspan Doors - Software module for easy creation of programs for door processing. - Different door types are already stored (doors with milled arches, round doors...) - Doors can ...

Acoustic hoods für IMA edge banding machines in various versions and dimensions available from stock Modifications / new lacquering available for a surcharge.

GAC Actuator ACB 2001, S/N: M301D7W002 for Mitsubishi S6R S6R2 S12R Mitsubishi No: 15674-6-01

Technical Specifications & Performance Data The Used case packer Mas Pack Accupack 3/6 – 13000 bph is a robust, second hand solution for high-speed industrial packaging in beverage production. Built by MAS PACK in 2004, this Accupack 3/6 Major combines mechanical precision with adjustable handling to place bottles or cans into corrugated cases with speed and repeatability. It is well suited to integrate within a used bottling line alongside filling, rinsing, capping and labeling equipment. Manufacturer / Model: MAS PACK Accupack 3/6 Major Category: Case Packer (pick-and-place) Year of manufacture: 2004 Rated speed: up to 13,000 bottles per hour (format-dependent) Gripper system: 36-head bottle pick-and-place assembly with adjustable grippers Packaging patterns: multi-pattern capability (e.g., configurations such as 3x6, 6x4, 12-bottle arrays subject to tooling) Container types: PET, ...

Used Tetra Pak helix accumulator 44 meters year 2018 The Used Tetra Pak helix accumulator 44 meters year 2018 efficiently accumulates and manages the production flow in aseptic packaging lines. Notably, Tetra Pak manufactured this model, identified as ACHX10-0400-44, in 2018 to handle brick-type carton containers. Technical and Functional Features To begin with, the Used Tetra Pak helix accumulator 44 meters year 2018 accumulates containers using a helical system that extends 44 meters. Its primary function is to compensate for speed variations between upstream and downstream machines. As a result, it optimizes production flow and prevents plant downtime. Furthermore, the ACHX10-0400-44 model provides high temporary storage capacity and maintains a continuous container flow without compromising structural integrity. Additionally, the helical architecture optimizes available space and red ...

Used Tetra Pak Helix Accumulator 47 Meters Year 2010 The Used Tetra Pak Helix Accumulator 47 meters year 2010 optimizes container flow in high capacity bottling lines. Specifically, it balances the production line efficiently, ensuring constant movement between different machines. As a result, it reduces downtime and increases overall plant productivity. Moreover, it enhances operational consistency, which improves overall efficiency. Tetra Pak, a global leader in bottling and packaging solutions, manufactured this model ACHX 30 to provide robustness and reliability. Notably, its helical structure compacts and efficiently accumulates containers while minimizing space usage. Furthermore, with a length of 47 meters, it manages large volumes of containers, ensuring a continuous flow even during format changes or maintenance operations upstream or downstream of the line. Therefore, it guaran ...