ORMA npc used machines

Hot press Make: ORMA Type: NPC/DIGIT 6/95 New machine Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (120°C) Optional: - Aluminium coating for panels - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - 4 side loading - Max. temperature up to 150°C - Max. temperature up to 200°C - Mylar protection foil - Pressure plate covered with glass fier fabric Teflon - Hardware for Industry 4.0

Veneer press Brand: ORMA Type: NPC/DIGIT 6/90 New machine Technical datas: Press area: 2500x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (up to 120°C) Optional: - Aluminium coating - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - Extra charge for temperature up to 150°C - Extra charge for temperature up to 200°C - Mylar protection foil 350,00 ? per panel - Pressure plate covered with glass fiber fabric Teflon - Hardware for Industry 4.0

Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0

Shelf length 3500 mm Shelf width 1300 mm Ground clearance 390 mm Number of pistons 6 Piston diameter 80 mm Water heating Safety switch breaker New Teflon foils on plates Machine Dimensions Length 410 cm Width 160 cm Height 200 cm

shelf length 3000mm shelf width 1300mm oil heating - built-in heater 6 hydraulic pistons piston diameter 85mm clearance between shelves 650mm pressure 3kg/cm2 pump motor power 2.2kW

ORMA 3-deck press NPC 26/14-3V + Höllenholscher Kühlstern discharge from site for sale.

Orma LS/ECO/CA 30/13 self-loading press Working length 3000mm Working width 1300mm Automatic material loading Adhesive Application System Shelves heated with oil up to 130C Upper clamping force 57t Side clamping force 9t Year of production 2001 CE Certified

HF Press Manufacturer Ormamacchine High-frequency continuous belt press Manual glue application incl. Laying table / filling bed 5000 x 1400 mm Press 4600 x 1400 mm Roller conveyor outlet 5000 mm Workpiece thickness max 200 mm Side printing cylinder 10 Pressing force 110 t RF Generator 40 Kw Dimension: 16000 x 3200 mm

SPECIFICATIONS: 01 Hydraulic press ORMA LS/R-45/13 Dimensions: 4500 x 1300 mm 08 Piston Ø 70 mm 02 Piston with rack-and-pinion plunger Stroke: 200 mm 01 Loading roller conveyor 4500 x 2200 mm 01 Unloading roller conveyor 4500 x 1300 mm (with stop) ACCESSORIES: 01 Generator HF with 40 Kw 01 Double roll gluer 01 Manipulator ELEPHANT 200 kg Length: 4000 mm

Key data: 500

ORMAL (DIEFFE) dowel cutter model TT500 with: - fast-moving blade D=500mm - Blade motor 7.5 hp, Volt 380 - cutting section from 40x40mm to 130x140mm - Automatic loader with transport clamp for the bars - magazine length 5 m (open at the back, can carry longer bars) - production capacity up to 45 cuts per minute of 80x80xL=80mm dowels - overall dimensions approx. 6 x 1.8 m - complete with electrical panel CE standard machine

ORMA disc gluing and screwing machine according to CE standards 4-roll gluing machine model I/413 with: - Working width 1300mm - Useful working height 100mm - double motorization, kw 0.75+0.75 - coating rollers D=250mm - dosing rollers D=180mm - with automatic brush washer Disc route with: - Useful working dimensions 3000x1300mm - Mechanical variable speed drive - with final photocells Year 2007, machines according to CE standards.

SPECIFICATIONS: Working width: 3000 mm Working height: 2500 mm Expandable bottom stop Equipped with manual workholding system 02 Pressing devices Hanging control panel Installed power: 1.8 kW

wymiary zewnętrzne 2500x1300mm Płynna regulacja prędkości posuwu Rok Produkcji 2017 moc silnika 0,75 KW

halbautomatische korpusklemme für möbel modell ORMAMACCHINE PN 30 gebrauchte maschine Technische Daten : Manuelle Beladung maximale Nutzmaße mm.2200 x 600 x 1200 mindestnutzmaße mm.250 x 600 x 280 motorisierter horizontaler Querträger manuell verschiebbare vertikaltraverse n.6 vertikale zylinder n.4 horizontale zylinder Zylinderhub mm.70 installierte Leistung kW 0,30 gesamtmaße mm.3000 x 800 x 2100 h Gewicht kg 1200

Power converter, power supply, power supply, switching power supply, medium voltage switchgear, switching device, medium voltage switching device, switchgear block, secondary switchgear -Manufacturer: Ormazabal, switchgear block type GAE630 1M5-9 -Rated voltage: up to 24 kV -Rated current: up to 630 A -technical Data: see photo of nameplate -Individual components: see photos -Quantity: 2 pieces available -Price per piece -Dimensions: 850/755/H1995 mm -Weight: 414kg

Power converter, power supply, power supply unit, switched-mode power supply, medium-voltage switchgear, switching device, medium-voltage switchgear, switchgear block, secondary switchgear -Manufacturer: Ormazabal, secondary switchgear type CGM.3-P -Rated voltage: up to 36 kV -Rated current: up to 630 A -Technical data: see photo of the nameplate -Individual components/accessories: see photos -Quantity: 3 pieces available -Price: per piece -Dimensions: 480/1035/H1750 mm -Weight: 246 kg

Flat grinding machine, Fabr. HK-Orion, Type 630Z NPC-K, Serial No. 205810888

Technical data Table length: 1100 mm Table width: 600 mm Grinding length: 1200 mm Grinding width: 550 mm Grinding height: 400 mm Table load max.: 750 kg Longitudinal travel (X-axis): 1300 mm Transversal travel (y axis): 470 mm Automatic cross-feed: stepless up to: 2.5 m/min Table speeds: stepless from: 1 m/min up to: 30 m/min Automatic vertical feed: up to: 300 mm/min Diameter of grinding wheel: 400 mm Width of the grinding wheel: 100 mm Wheel int. diameter: 127 mm Grinding wheel speeds: from: 1440 rpm Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 7.5 kW Machine´s weight about: 6700 kg Overall dimensions machine: Length: 4800 mm Width: 2300 mm Height: 2300 mm Various accessories: Coolant system Paper filter facility: 460 mm Magnetic plate: Length: 1200 mm Width: 500 mm Wheel trueing attachment Digital readout number of axis:: X - Z Manufacturer: Heidenhain Lamp Central lubrif ...

1 used ELB SURFACE GRINDER Model: SWBE 010 NPC-K Grinding area: 1000 X 550 X 400 mm Year of Make: 1988 Grinding wheel:  400 X100 X 127 mm ACCESSORIES Electric straight-line dresser with compensation Electro-Permian Magnetic Clamping Plate 1000 X 400 mm (SAV) Magnetic adhesive force control Universal Paper Belt Filter Grinding wheel with holder

An ELB cycle-controlled surface grinding machine is available. Grinding length: 600mm, grinding width: 375mm, max. workpiece height: 375mm, magnetic clamping plate dimensions X/Y: 1000mm/375mm, table travel: 525mm, table speed: 30m/min, max. table load: 300kg. Machine dimensions X/Y/Z: approx. 2550mm/2050mm/2500mm, weight: approx. 4000kg. Including a coolant unit. st möglich.

CONTROLS   PLC SIEMENS S7 300 WORKING RANGE SURFACE GRINDING   grinding length: 800 mm   grinding width: 600 mm   vertical travel: 400 mm TABLE (SURFACE GRINDING)   table surface (left-right): 1300 mm   table surface (front-back): 550 mm   workpiece load (max): 700 kg   magnetic table: yes MAGNETIC TABLE   length: 800 mm   width: 500 mm SPINDLESTOCK GRINDING SPINDLE   spindle revolutions (max): 1400 /min   drive power: 11 kW GRINDING TOOL   type of grinding tool: wheel   diameter (max): 400 mm   borehole: diameter: 127 mm   width: 100 mm AXIS DRIVES   traverse velocity X (min): 1 mm/min   traverse velocity X (max): 30 mm/min DRESSING DEVICE   dressing tool: single diamond   operation modus ...

Gear pump Axial Piston Pump Overhauled by the manufacturer + conserved Manufacturer: Rexroth Type: A11VO60EP2G / 10R-NPC12N00H-S Further details and scope of delivery can be found in the Photographs. Grey and red lacquered available. Color may therefore differ from the images. for more information see pictures.

The vacuum-membrane press allows you to apply PVC foil to: MDF elements (fronts, slats), doors, frames and bent elements. The press is also prepared to make bent elements (fronts) up to a height of 40 cm using a membrane. The use of a membrane allows veneer or veneer to be applied to wooden elements. The press works in two systems; automatic or manual with the possibility of employee intervention regarding the temperature and pressure of the press. max dimension of the semi-finished product 2600x1300mm Membrane press ideal for furniture fronts Membrane vacuum press for veneering and bending For coating with thermoplastic films or veneer 2D and 3D vacuum forming of thermoplastics and acrylic materials Woodworking, veneer, veneer, both flat and curved surfaces Surface cover with simple relief, veneer, leather, paper and plastic Production of bent glued vacuum vacuum vacuum parts ...

1250 MT Presezzi Brass Rod Oil Hydraulic Extrusion Press Line w/ OCN Handling System (New 2009) MANUFACTURER – PRESEZZI YEAR – 2009 SERIAL NUMBER – 2671-2009 PRESS TONNAGE – 1250 MT WORKING PRESSURE – 260 BAR BILLET DIAMETER – 145MM BILLET LENGTH MAX – 650MM MAIN CYLINDER (SINGLE ACTING) WORKING PRESSURE – 260 BAR RAM DIAMETER – 760MM POWER – 1149 MT SIDE CYLINDERS (DOUBLE ACTING) OPERATING PRESSURE – 260 BAR BORE – 160MM ROD DIAMETER – 100MM THRUST FORCE DURING EXTRUSION – 107 TON THRUST FORCE DURING RETURN – 65 TON TOTAL MAIN CYLINDER AND SIDE CYLINDER TRUST FORCE – 1256 TON CONTAINER MOVEMENT (DOUBLE ACTING) OPERATING PRESSURE – 260 BAR BORE – 160MM ROD DIAMETER – 100MM SEALING FORCE AT 300 BAR – 107 TON OPENING FORCE AT 280 BAR – 65 TON SHEAR CYLINDER (DOUBLE ACTING) OPERATING PRESSURE – 26 ...

Works perfectly Full line Panel press Oil heating Power 31kw 250/130cm Automation of press entry and exit Ejector to moulder for example ORMA SC2R-300 gluing machine at press infeed 380V Auction-ID: A3-43511-36990