OKUMA mx used machines

BRAND: OKUMA YEAR: 1999 MODEL: MX45-VAE PRODUCTION HOURS: 18000 APPLICATION TYPE: MILLING LOCATION: LITHUANIA MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: OKUMA MODEL: OSP U100M MAIN DRIVE SPINDLE SPEED RANGE: 12000 1/MIN MOVEMENT X-AXIS MOVEMENT: 800 MM Y-AXIS MOVEMENT: 500 MM Z-AXIS MOVEMENT: 500 MM TOOLS SLOTS IN STORAGE: 20 TYPE OF TOOL HOLDER: SK40

BRAND: OKUMA YEAR: 1998 MODEL: MX55 VB APPLICATION TYPE: MILLING LOCATION: ITALY MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 3000 MM MEASUREMENTS DEPTH: 2700 MM MEASUREMENTS HEIGHT: 2700 MM MACHINE WEIGHT: 9000 KG CONTROL UNIT BRAND: OSP MODEL: 700 M CNC MAIN DRIVE SPINDLE SPEED RANGE: 12000 1/MIN TOOL TAPER: BT 50 MOVEMENT X-AXIS MOVEMENT: 1050 MM Y-AXIS MOVEMENT: 560 MM Z-AXIS MOVEMENT: 450 MM (LIGHT ON THE VERTICAL MM. 610) TABLE OUTER LENGTH: 1300 MM OUTER WIDTH: 530 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - AUTOMATIC PALLET CHANGE 2 APC MM. 1300 X 530 - ATC BT 50 TOOL CHANGER WITH 32 PLACES - MAXIMUM TOOL LENGTH MM. 400 THROUGH SPINDLE COOLING 20 BAR - CHIPS CONVEYOR - SHOWER - PRESETTING ON THE TABLE - ZERO OFF SET PREPARA ...

OKUMA MX55 Control: OSP700M Machine hours (spindle running time): 26,889 Accessories: various tool holder BT50; 4. Axis Partial Attachment

Stock number: 3774 PROFILE BENDING MACHINE Manufacturer: KUMLA - ROUNDO, Type: Z-30 Machines NO.: 5017, Year of manufacture: 1990 Specifications: Shaft dia. 90 mm Round steel 60 mm Flat steel 200 x 30 Special roll mm Frame steel upright 100 x 20 mm Angle steel 90 x 90 x 9 mm Speed 7.5 m/min Upper roller 280 mm Ø Load by steel 40 Kg/mm2 16 cm3 Square steel 55 x 55 mm Total power 4 kW Hydraulic. 3-reels. Horizontal/Vertical Accessories: Digital Various matrices. Length: 1250 mm, Height: 1550 mm, Width: 1100 mm, Weight: 2100 kg

Control: OSP-300LA Year of Make: 2019 Distance between tips or spindle lugs: 1085 mm Circumferential diameter over carriage / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm Travel C-axis: 360 mm Travel W-axis 895 mm Main spindle speed: 45 - 5,000 rpm Sub-spindle speed: 45 - 6,000 rpm Recording: BMT Tool turret: V12 (driven) Equipment: Conveyor One touch IGF Touchsetter 2x 3-jaw chuck Sub-spindle Coolant Plant HMF-980 Suction

OKUMA MA-50 HB CNC horizontal machining center was built in 2000 by the Japanese corporation OKUMA. The machine, designed for advanced machining of workpieces with a maximum weight of 800 kg, is distinguished by its high reliability, efficiency and precision. The machining process is performed fully automatically by means of a high-speed spindle and cutting tools taken from a 40-position magazine. What’s more, the automatic pallet exchange system allows for simultaneous loading and unloading of workpieces during the machining process, reducing machine downtime to a minimum. The MA-50 HB CNC machining center is offered with extensive equipment, including among others a rotary table and an advanced CNC control with an intuitive interface. The total weight of the machine is 21000 kg. Technical specifications of the OKUMA MA-50 HB CNC milling machine - feed in the X/Y/Z axis: 700/800/7 ...

Okuma Multus B300-W 6 Axis Lathe-Milling Machine Ffebm Noyg Rf Njrbw Tju -Okuma OSP P200L -BJ 2008 -Cutting Time 10,500 h -H1 milling spindle 6000 rpm -Main spindle 3800 rpm, Rota NC 315-86 -Sub-spindle 5000 rpm -ATC 60 System HSKA-63 (60 Tools) -Geometry very good -Marpos Tool Sensor Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, a visit to our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage. Delivery: free loading truck 100% payment before loading upon invoicing. All information is non-binding, w ...

Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible.

Okuma Macturn 30 1SW 1000, BJ 1999, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 Bar, gear milling option, approx. 12500 spindle hours, HS Big Bore, GS Standard Bore, good condition In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage. Delivery: free loading truck 100% payment before loading upon invoicing. All information is non-binding, we expressly reserve the right to make errors and prior sales. The sale is made under exclusion of any warranty claims. The goods remain the prop ...

The Okuma MA series is a horizontal machining center with long travel distances for heavy-duty machining. The travels X/Y/X 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm -OSP P200M -BJ 2008 -Cuttng Time 17,500 h -Renishaw Tool Eye -ATC 150 SK50 -2 pallet system -Spindle speed 6000 RPM -B-axis NCB 0.001 degrees -X/Y/Z 1000/900/1000 mm -Mayfran Consept coolant system with chip conveyor & high pressure pump 60 bar In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of  ...

Stock number: 3846 Angetribende Tool Manufacturer: Eppinger , Type: 9.654.088 Year of construction: 0 Specifications: VDI-40 Size Winckel 90 Insert Type ER32 External Cooling Speed max 5000 rpm Motor Power Driven Tools 40Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3848 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 2 Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3849 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 3, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3850 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.099 Machine NO.: 5, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor power driven tools 70 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3851 Angetribende Tool Manufacturer: WTO, Type: 410520135-40 Machine NO.: 5, Specifications: VDI-40 Size Winckel 90 Insert type ER32 - K19-09608-1.1 Internal Cooling Speed max 6000 rpm Motor power driven tools 63 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M

Stock number: 3852 Angetribende Tool Manufacturer: Eppinger , Type: 4.200.952 Machine NO.: 7 - 296747-1 Specifications: VDI-40 Size Straight Insert Type ER32 Internal Cooling Motor power driven tools 50 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3853 Angetribende Tool Manufacturer: Benz, Type: 114EA04941E6 Machine NO.: 8, Specifications: VDI-40 Size Straight Insert Type ER32 Speed max 4500 rpm Motor power driven tools 50 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3854 Angetribende Tool Manufacturer: Benz , Type: 114EA04941E6 Machine NO.: 9, Specifications: VDI-40 Size Straight Insert Type ER32 Speed max 4500 rpm Motor power driven tools 50 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

CNC turret lathe Okuma LB15 at call The OKUMA LB 15 CNC lathe has been professionally serviced regularly since its purchase and is in perfect technical condition. It has a hydraulic chuck with a diameter of 250 mm and a turret holder for 12 tools. The turning spindle rotates at a speed of 70-3800 rpm and has a diameter of 75 mm. Technical specifications of the CNC lathe OKUMA LB-15 – CNC control: OSP 5000L-G CNC system (German) – Data transmission: RS232 – Tool turret: 12-position type BOLT ON – Slain chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – non-continuous spindle – Diameter of the spindle bore: fi 75 mm (at a depth of 70 mm, measured from the front of the lathe chuck and without jaws) – Diameter of the spindle bore: fi 28 mm (at a depth of 200 mm, measured from the front of the lathe chuck and without jaw ...

OKUMA MA-600HII CNC machining center was built in 2012 by the Japanese brand OKUMA Corporation. This highly efficient machine is used for advanced workpiece machining in 4 axes. The machining process is performed fully automatically inside a large working area by means of precision cutting tools and a reliable high-speed spindle. The automatic pallet changing system allows workpieces to be loaded and unloaded simultaneously during machining, reducing machine downtime to a minimum. The extensive equipment also includes, among others, a capacious tool magazine and an intelligent CNC controller with an intuitive interface. The MA-600HII CNC horizontal machining center weighs 24500 kg. Technical specifications of the OKUMA MA-600HII CNC milling machine - CNC controller: OSP-P300MA - number of axes: 4 (X,Y,Z,B) - feed in the X/Y/Z axis: 1000/900/1000 mm - rapid traverse in the X,Y,Z ax ...

Datenblatt / Datasheet: Control: OSP P200-M Travels X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degree] 1; 360 degree incrementing Tool Changer 200 ATC MAS BT50 Tool slots: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet pool 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Further features: – Renishaw Sample – Renishaw Tool Break Control – Mayfran Concept with high-pressure pump In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both ele ...

CNC Control, Numeric Control, CPU Rackaus OKUMA LB 10OKUMA Typ OPUS 5000 CPU /IF RACK 9ANr.: E7191-292-325-1Baujahr 1985Ser. Item no.: 003184Dimensions W x H x D 390 x 345 x 240 mmThe device is still ready for operation installed in an OKUMA LB 10. Further components from OKUMA can be found under stock number: 60403, 60404, 60405, 60407, 60408, 60409, 60410, 60411; used

This 4-axis Okuma Multus B300 II Turn Mill Centre was manufactured in 2022. It features a control unit OKUMA OSP-P300SA, a main spindle with a three-jaw chuck diameter of 304mm, and a counter spindle with a C-axis. The milling spindle supports up to 6000 rpm with a torque of 65.7 Nm. If you are looking to get high-quality milling and turning capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information.

This 3-axis Okuma LB 25 II-M was manufactured in 1998. A robust horizontal turning machine featuring an Okuma OSP 5020L control, it offers a spindle speed of 3,500 rpm and a 12-position tool turret. It handles a max workable diameter of Ø 420 mm and lengths up to 1,250 mm. Consider the opportunity to buy this Okuma LB 25 II-M horizontal turning machine. Contact us for more information about this machine.

This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turn-mill center with a swing over bed of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, toolsetter, and a tool magazine holding 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking to get high-quality turning capabilities consider the Okuma Multus B300-W machine we have for sale. Contact us for more information.