NEFF rhs used machines

pressure:60 t distance between columns:650 mm stroke:220 mm distance table/ram, max. stroke up, adjustment up:410 mm table surface area:600 x 525 mm pressure of drawing cushion in table:5 t stroke of drawing cushion in table:80 mm table height over floor:900 mm side window:200 mm ram surface:560 x 490 mm dimensions (WxDxH):1,9 x 1,3 x 2,7 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick FGS 600 drawing cushion in table:hydraulic foundation pit:not necessary

pressure:60 t distance between columns:650 mm stroke:220 mm distance table/ram, max. stroke up, adjustment up:410 mm table surface area:600 x 525 mm hole in the table:110 mm table height over floor:900 mm side window:200 mm ram surface:560 x 490 mm power requirement:15,0 kW dimensions (WxDxH):1,9 x 1,3 x 2,7 m foundation pit:not necessary

Pressure 6.3 to. ub 450 mm, extension 200 mm, pushing speed 3.5 m/min, installation height 700 mm, table size 360 x 320 mm, table height 750 mm, total power 2kW, weight. 900 kg

Force of pressure: 63 t table size: 610 x 800 mm throat depth: 350 mm stroke: 200 mm Electr. Supply: 380 V, 15 kW space: 1800 x 920 x 2440 mm weight: 3940 kg

Manufacturer: NEFF Model: 4SP 160 Year of Manufacture: 2011 Operating Hours: 25 aprox Type of Machine: Hydraulic Press Weight: 7000 kg Condition: Used Control System: Siemens S7 (PLC) Technical Specifications - Press Force: 1600 kN (adjustable from 160–1600 kN) - Return Force: Approx. 160 kN - Stroke (Hub): 500 mm - Table Size (W x D): 2000 x 800 mm - Ram Size (W x D): 2000 x 800 mm - Clear Height (Ram Up): 700 mm - Max. Daylight (Open Height): 2850 mm - Table Height Above Floor: 800 mm - Clearance Between Columns (W x D): 1600 x 410 mm - Installation Space (W x D x H): 2000 x 800 x 700 mm Electrical System - Operating Voltage: 400V AC - Control Voltage: 24V DC - Valve Voltage: 24V DC - Frequency: 50 Hz - Voltage Fluctuation Tolerance: ±5% - Max. Ambient Temp: 35°C Find more here - / Contact us at -

For sale are several screw jacks from the manufacturer NEFF Gewindetriebe GmbH, type C3-RF-6-T30x6, in various designs. These are new or unused components. Basic technical data (slightly different depending on the model): - Type: C3-RF-6-T30x6 - Size: C3 - Ratio: i = 6:1 - Stroke: 300 mm - Installation position: vertically upwards - Spindle type: rotating spindle - Trapezoidal lead screw: TGS-R-30x6-RH - Operating torque: approx. 6.1 Nm / Starting torque: approx. 8.5 Nm - Total lengths: 450 mm or 496 mm depending on the model - Special designs: Models with bellows and adapter available - Spindle nut: Bronze, Ø 60 mm Hint: There are several variants available. Details on the execution can be requested individually.

Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible.

CONTROLS   PLC SIEMENS S7 300 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 800 to PRESS TABLE   table surface (left-right): 2600 mm   table surface (front-back): 2000 mm   height above floor level: 540 mm SLIDE   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 460 mm/s   working velocity min.: 25 mm/s   working velocity max.: 44 mm/s   return velocity max.: 460 mm/s TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1700 mm ELECTRICAL SPECIFICATIONS   total power consumption: 180 kW DIMENSIONS / WEIGHTS   total weight approx.: 95000 kg ATTACHMENTS (PRESSES)   press automation: yes   gripper transfer system: yes   acc. to actual accident protection ...

pressure:6,3 t throat:300 mm stroke:300 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:450 x 400 mm hole in the table:80 mm table height over floor:700 mm ram surface:50 mm oil volume:90 l power requirement:5,5 kW weight:1,35 t dimensions (WxDxH):1,8 x 2,0 x 2,7 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanical

pressure:6,3 t throat:210 mm stroke:200 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:380 x 350 mm hole in the table:100 mm table height over floor:1050 mm ram surface:45 mm power requirement:4,0 kW weight:0,8 t dimensions (WxDxH):0,8 x 1,2 x 2,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

Pressure:40 t throat:330 mm stroke:250 mm distance table/ram, max. stroke up, adjustment up:450 mm table surface area:800 x 500 mm hole in the table:100 mm table height over floor:900 mm ram surface:100 mm Speed down:406 mm/s Speed up:393 mm/s Working speed:14 mm/s oil volume:350 l power requirement:7,5 kW weight:4,6 t dimensions (WxDxH):1,3 x 2,3 x 3,4 m German Safety: permitted for manual loading:CE-sign depth stop:mechanical

Type: RHS 1 U 200 GR 360, Y&cams: 1995, engine: Loher, 4,500 rpm / 5.5kW, on base frame, with suction and pressure bellows and 7 vibration dampers.

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump -Connection: 380 volts -Power: 0.75 kW -Dimensions: 400/200/H430 mm -Weight: 40 kg

Refrigerant filling and service system Manufacturer: Agramkow Type: RHS 1280 year of construction: 2010

Crankcase for MWM RHS 518 A, 8 cylinders for sale. Housing is in very good, used condition, see detail photo. Previously used as an emergency power generator with few operating hours. Part Number: 26.01-82/04 26.01-82/34 E 26.100-142/04 26.100-142/34 E

diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manufacturer: Bosch, injection pump from generator MWM RHS 518V16 -Injection pump: Bosch EP/RSUV300-750P9/332/1R PE8P120/520RS190 -Feed pump: Bosch FP/K 22 P11 -Shaft: Ø20 - 25mm / M18x1.5 -Individual components: see photos -Dimensions: 1000/170/H290 mm -Weight: 41 kg

Starter motor, diesel engine, drive motor, marine diesel engine, diesel generator -Manufacturer: Bosch, starter motor from MWM RHS 518V16 generator -Type: Bosch 0 001 510 003 -Voltage: 24V 9PS -Teeth: 11 -Dimensions: 445/150/H210 mm -Weight: 26 kg

diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos -Total dimensions: 800/210/H70 mm -Weight: 8.7 kg

Digestate Dryer - RHS Rhino Agitator Dryer - Manufacturer: RHS - Model: MCT10 - Year of Manufacture: 2018 - Power Output: 33 kW - Operating Voltage: 3-phase, 400V, 50 Hz - Control Voltage: 24V DC - Power Factor: ~0.8 (capacitive) - Frequency: 50Hz - Fuse: minimum 100A - Equipped with: Underbody cleaning on one unit, control cabinets, stainless steel feed screws, heat exchanger, heating water pump, supply air fans - Quantity: 3 units - Operating hours: approx. 7000 hours - Variants: One machine equipped with underbody cleaning Functionality The RHS Rhino Dryer is engineered for the drying and hygienization of fermentation residues (digestate) and slurry. It supports efficient moisture reduction, stabilizing the material and reducing odor. The feed system utilizes DN 150 pipelines with an eccentric screw pump, and the dried material is discharged through stainless steel feed screws for  ...

Trapezoidal lead screw with screw jack NEFF MULI 1 lifting capacity 5 kN stroke: 150 mm spindle: Ø 18 mm used, tested ! Dimensions: 320 x 100 x 85 mm

Trapezoidal lead screw with screw jack NEFF MULI 1 lifting capacity 5 kN stroke: 150 mm spindle: Ø 18 mm hole spacing: 60 / 51.5 mm 4x threaded hole: M8 x 1.25, depth: 18 mm used, tested ! Dimensions: 320 x 100 x 85 mm

Trapezoidal lead screw with screw jack NEFF MULI 1 M1-N-H-TGS-0250-G Lifting capacity 5 kN stroke: 250 mm Spindle: Ø 18 mm used, tested ! Dimensions: 440 x 105 x 85 mm

Trapezoidal lead screw with screw jack NEFF MULI 1 M1-N-H-TGS-0250-G Lifting capacity 5 kN stroke: 250 mm Spindle: Ø 18 mm used, tested ! Dimensions: 440 x 105 x 85 mm

Okuma Multus B300-W 6 Axis Lathe-Milling Machine Ffebm Noyg Rf Njrbw Tju -Okuma OSP P200L -BJ 2008 -Cutting Time 10,500 h -H1 milling spindle 6000 rpm -Main spindle 3800 rpm, Rota NC 315-86 -Sub-spindle 5000 rpm -ATC 60 System HSKA-63 (60 Tools) -Geometry very good -Marpos Tool Sensor Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, a visit to our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage. Delivery: free loading truck 100% payment before loading upon invoicing. All information is non-binding, w ...