MORETTO to used machines

Used drying system for hygroscopic plastics from Moretto. New 2011. *Composition: - dehumidifier with two dehumidification columns XD610S, - stainless steel OTX 600VP insulated hopper with suction valve + heater 9 kW + fastening frame, - stainless steel OTX 1800VP insulated hopper with suction valve + 27 kW heater + fixing frame 27 kW heater + fastening frame, - server to control the process of air distribution to FLOWMATIK hoppers, - modular piping. *Other details: - Drying time: 3h - Initial moisture content: 0.2% - Final moisture content: 0.02% - Air flow rate: 1200 m3/h - Dew point value down to - 75°C *Operating hours: 29477 h

Moretto Set: Conveyor with proportional valve + Dosing unit with tank / Like new (2 sets available) Year of Make: 2021 Location: Lodz, Poland Description: Screw dosing device, volumetric with container Adjustment of the dosing speed Conveyor with proportional valve Price: On request

Conveyor - Moretto Year of construction:* Location: Lodz, Poland Description: The conveyor with proportional valve Price: On request

Conveyor - Moretto Year of construction:* Location: Lodz, Poland Description: Suction conveyor with a hose and suction probes The conveyor has its own control system. On the control system, you can set the proportions in which the raw material is to be transported It is possible to buy a plastic container as well as a proportional valve for transporting 2 raw materials, e.g. regrind and original Price: On request

Qty. 1 Second-hand V-cut saw line with PE film packaging line with PE extrusion Mfc.: Emmegi, Moretto Type: Saw: V-Cut - EST D46 Built: 2004 Min./Max profile length: 1500 – 7000 mm Consisting of: Saw line PE extruder Film packaging line with feeding device and stacker Connected power: 25 kW, 400 V, 50 Hz Control voltage: 24 V

ready to work

Key data: 95 °C, 12 kW, 45 W

This temperature control unit is in good condition inside and out. Thanks to the powerful pump and the many outlets, it can supply several water circuits. Make an offer. Please also see my other advertisements.

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commiss ...

MSC, MULTIVAC, Terminal-T, Tochscreen

Walter Helitronic CNC Tool Grinding Machine - Grinding machine Hersteller [manufacturer]: Walter Type [ type]: Helitronic Control unit: Heidenhain TNC 360C Incl. handwheel Baujahr[construction year]: 10/2002 Travel path: X= 1500mm Y=500mm Z=450mm Workbench: L = 1800mm W=500mm Spindle [spindle]: swivel +-90° Feed speed [feed speed]: 10-4000mm/min Spindle rotation speed: 30-3000 rpm Feed force [feed force]: 10,000-15000N Tool holder: SK 50 after DIN2080 Weight: 7.000kg Approx. (W x D x H): 3.0m x 2.25m x 2.85m Incl. various accessories according to photos Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Tel. +4917621834834 Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - u ...

CONVEX® Combi-Tower - by UBERT - Made in Germany Two-in-One - The Advantages Combined arrangement for the smallest footprint. This also avoids long distances between sales rooms. Convex double glass doors for perfect product presentation, minimal heat loss and extremely low touch temperatures Intuitive user guidance thanks to plain text display Software update via USB interface Shorter cooking times of less than an hour for grilled chickens with a gross weight of 1kg each Programmable climate control in the cooking chamber for a perfect grilling result The new CONVEX® rotisserie Equipped with 3 heating systems in one device: Infrared for optimal tanning Convection for fast and even cooking Steam for juicier products CONVEX® dampers For the operating modes steam, combination, hot air, regeneration 8 levels (longitudinal insertion) for 1/1 GN ...

Shimadzu TOC VCPH with SSM-5000A solids module and ASI-V autosampler as liquid propene encoder, software

Marel concept 500 labelling machine, - top and bottom labelling machine

The most cost effective solution for extruders up to 3.000 kg/h., Very compact shape, less metal to heat up., High resistance to pressures line (up to 350 bar)., Minimum material waste due to the continuous cotamination removal., Adjustable speed of the discharge screw allows the finest handling. Continuous cleaning allows to use filters longer than traditional technologies., Pressure is kept constant all the time for a more even process, Easy maintenance: filter replacement easier and faster, without removing machine’s components. Also available with an automatic opening system that makes opening and closing lid’s operations easier, faster and safer., Double screening system : 2 x Ø 370 mm., With laser screens (from 60 to 350 µm), punched screens (from 400 to 2000 µm),, metallic mesh screens (from 230 to 10 mesh)., Bespoke screens available since they are produced in-house., Lase ...

WEISS AGGLOMERATOR, for LDPE LLDPE HDPE PP PS PET, complete with loading belt, metal detector, dual chamber system, n.2 rotating knives on each chamber, n.2 x 160 kw drives, control panel + electric cabinet, including :, extraction blower, pipes, cyclone, bag holding structure, INSTALLED POWER: 320 kw, capacity: 1.000 kg/h, PRESENT CONDITIONS: disconnected, SERVICES AVAILABLE: full reconditioning on separate offer

Year of construction 2013 Drying tower Ambaflex Belt width 40 cm Conveying length 20 m Inlet height approx. 50 cm Spout height approx. 120 cm Orientation 90° left Speed up to 13 m/min Delivery date: immediately Price on request. Worldwide Delivery & Installation

Control machine, monitor, control tool master -Manufacturer: Wieder, Monitor Tool Master TM -Type: WPC-ES-486, (133-1.2-L-9.4-T) -Dimension: 300/160/H215 mm -Weight: 6.7 kg

Torque wrench, torque tool -Manufacturer: GEDORE, torque wrench type TORCOFIX -Z 80-400 Nm -Art.No.: 4440-01 -Torque: 80 - 400 Nm / 60 - 300 lbf-ft -Holder: pin holder Ø 16 mm -Transport dimensions: 755/70/H65 mm -Weight: 2.1 kg

Torque wrench, torque tool -Manufacturer: GEDORE, torque wrench type TORCOFIX -Z 40-200 Nm -Art.No.: 4420-01 -Torque: 40 - 200 Nm / 30 - 150 lbf-ft -Holder: pin holder Ø 16 mm -Transport dimensions: 560/60/H60 mm -Weight: 1.3 kg

Manufacturer: DMG Type: Tool presetter Year of Manufacture: 2013 Find more here - / Contact us at -

Used Futura top labeling machine 15000 BPHTechnical Specifications & Performance DataThis P.E. Labellers FUTURA TOP carousel labeling machine is configured for mixed cold glue and hot melt operations, ideal for high-quality label application within a used bottling line or as a standalone unit in industrial packaging environments. Engineered for reliable beverage production, it offers robust performance with precise control and flexible container handling.Manufacturer: P.E. LabellersModel: FUTURA TOP 20T/1420/4SProduction speed: up to 15,000 bphCarousel configuration: 20 plates (Counterclockwise rotation)Labeling stations: 4 total (3 cold glue, 1 hot glue)Seal capability: 1 dedicated station for tax stamp/seal with cold glueMax lift (bottle height adjustment): 338 mmBottle formats: Compatible with 0.5L, 1.0L, 0.75L, 1.5LContainer types: PET and GlassBottle dimensions handled: PET 0.5L à...

Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED

Built: 2003 Location: Germany Brand: TetraTop Model: TetraTop 170V Availability: instantly Technical details: Volume (ml): 1,000 ml, 750 ml, 500 ml Tray Type: TetraTop Flat Top Capacity: 9,000 cartons / h Filling machine TetraTop 170V, commissioning 2004, purchase contract 2003. The rated power of the machine is 9,000 EH /h. Formats: 1,000ml cartons, 750ml cartons and 500ml cartons mileage as of 31.08.2011: 13,772 operating hours. • 1x GSU for granulate transport • 1x granulate hopper • 1x HCCU for foam cleaning • 1x Volume adjustment type 190V converted to stainless steel cylinder • 1x 20 replacement cartridges • 2x tetraPak type Capper 20 screw-on machines for screwing on 38mm screw caps • 1x manual roller transporter for inserting the rollers into the ASU • 1x roller truck for roller transport • 1x retrofit air conditioner Rittal for  ...

Ladies and gentlemen, Below you will submit a non-binding offer for a used 3.7 tonne arc furnace: Offer Arc Furnace we will send you our offer with technical data on a used standard system arc furnace 3.7 t All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of  ...

Ladies and gentlemen, Below you will submit a non-binding offer for a used 50 tons arc furnace: Offer Arc Furnace we will send you our offer with technical data on a used standard system arc furnace 50 t All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the ...