MONDIALE hbm used machines

spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1700 mm Control: Fanuc spindle taper ISO: 50 z-travel: 1400 mm Table area: 1250x1500 mm Table load: 5000 kg spindle turning speed range: 35-3000 U/min Tool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kW weight of the machine ca.: . t dimensions of the machine ca.: 1250 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 2000 mm w-axis: 700 mm table load: 10.000 kg Table dimensions: 1600x1800 mm Control: Fanuc 31iMB voltage: 400 V number of spindle speeds: 35-3000 U/min taper ISO: 50 Tool changer: 60 total power requirement: 20/30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1700 mm Control: Fanuc 32iMB spindle taper ISO: 50 z-travel: 1400 mm Table area: 1250x1500 mm Table load: 5000 kg spindle turning speed range: 35-3000 U/min Tool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kW weight of the machine ca.: . t dimensions of the machine ca.: 1250 x 1500 mm Manual Guide i The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 2000 mm w-axis: 700 mm table load: 10.000 kg Table dimensions: 1600x1800 mm Control: Fanuc 31iMB voltage: 400 V number of spindle speeds: 35-3000 U/min taper ISO: 50 Tool changer: 60 total power requirement: 20/30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1300 mm turning diameter over slide rest: 900 mm turning length: 8000 mm spindle diameter: 153 mm total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 970 mm, 2200 mm, 500 1/min

Control Fanuc OiTD Centre Distance 2,200 mm Max. swing over bed 970 mm Max. Swing over Cross Slide 720 mm Max. Turning diameter 850 mm Spindle Bore Ø 230 mm R.P.M. 500 kW 37 Volts 400 Cycles 50 Including: 4-Jaw chuck, Ø 800 mm rear Pneumatic 3-Jaw chuck, Ø 600 mm front

turning diameter over bed: 420 mm turning diameter over slide rest: 290 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 210 mm spindle bore: 38 mm total power requirement: 4,0 KW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 2,4 x 1,1 x 1,3 m Lead and feed spindle lathe - 3-jaw chuck 220mm - Quick-change tool holder with 5 cassettes - Steady rest - Chip tray - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mm turning diameter over slide rest: 260 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 205 mm spindle bore: 50 mm total power requirement: 4,5 KW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter over bed (mm) 365 Turning length (mm) 1000 Spindle bore (mm) 42.5 Max. rotary diameter over carriage (mm) 205 R.P.M. / Speed 38 - 1600 (16x) Accessories: Digital display 2 axes 3 B. chuck 250 mm, 4. B. chuck 200 mm, documentation and Multifix steel holder

Year of manufacture 1980s/90s Technical data: Tip height: 185 mm Center width: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock mount: MK 3 Quill stroke: 110 mm Dimensions (WxDxH), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw lathe chuck, brand: Röhm, ø 200 mm - Quick-change holder with 4 inserts - Bed stop - Chip tray

Horizontal turning machine manufactured in 2008. This MONDIALE BNC-2260XL features a maximum turning length of 1500 mm and a swing over bed of 550 mm. It includes a bar capacity of 69 mm and a maximum workpiece weight of 2000 kg. If you are looking to get high-quality turning capabilities, consider the MONDIALE BNC-2260XL machine we have for sale. Contact us for further details regarding this machine.

spindle passage: 230 mm turning diameter over bed: 970 mm turning diameter over slide rest: 720 mm Control: Fanuc OiTD turning length: 2200 mm total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m Year of manufacture 2013 Control: Fanuc OiTD Other controls possible Turning length (mm) 2200 Max. turning diameter (mm) 970 Max. turning diameter over slide (mm) 720 Spindle diameter (mm) 230 Diameter range (mm) 850 Speed: 500 kW 37 Voltage: 400V Hz 50 Including: 4-jaw chuck, Ø 800 mm rear Pneumatic 3-jaw chuck, Ø 600 mm front The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your worksh ...

turning diameter over bed: 410 mm turning diameter over slide rest: 220 mm turning length: 1000 mm centre height: 205 mm : mm spindle bore: 46 mm spindle turning speed range: 40 - 2000 U/min total power requirement: 22,0 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,42 x 1,3 x 1,55 mm Lathes with: - Copying attachment - Forkardt 3-jaw chuck F250 - Multifix tool post - Coolant system - Machine light - Chuck guard - Chip tray - Chip guard wall - Foot brake The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe, turning machine, lead screw lathe, lead screw lathe -Manufacturer: Mondiale, lead screw lathe type Celtic 20 -Turning length: 1200 mm -Turning Ø over bed: 440 mm -Turning Ø without bed: 640 mm -Turning Ø over support: 280 mm -Spindle bore: Ø 45 mm -Spindle speeds: 22 - 1000 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl. bezel, tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 1120/2230/H1215 mm -Weight: 1276 kg

SIG-HBM: Maximum width of the film roll: 740 mm Control: Siemens S7 Product Moulding / straightening / filling / closing of bags - tubular bags Description horizontal bagging machine, rotating cross-sealing station for hot or cold sealing The machine is designed for the following products: chocolate bars, fruf bars, chocolate table, waffle, biscuit stacks, baked goods, deep food, non-food, pre-packaged products, cheese, meat,

The machine has a Siemens S7 control system

Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of  ...

Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of  ...

sheet width: 3100 mm plate thickness: 6 mm thickness at Niro-steel: 4,5 mm daylight upper clamping: 100 mm Bending angle: 0 - 135 ° total power requirement: 7,5 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: 4,5 x 1,72 x 2 m Electric 380 Volt: manuel back gauge adjustable from the front: 70 - 600 mm Foot switch with emergency stop: Segmented upper tool: Oil filling: exklusive Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with bending bolts Prism 80 mm Stop and die holder Foot switch, optional two-hand operation Pressure adjustment Colour: blue/beige Total power requirement: 5 kW Tool height: 200 mm Stroke 250 mm Pressure 40 t Dimensions: 1300 x 680 x 1110 mm Weight: 880 kg

spindle diameter: 110 mm x-travel: 2200 mm y-travel: 1600 mm z-travel: 1600 mm spindle turning speed range: 35 - 3000 U/min spindle drive motor: 18,5 / 15 kW spindle taper ISO: 50 w-axis: 500 mm table surface area: 1250 x 1500 mm Table load: 5000 kg T-slot - width: 22 H8 B-axis (table): 0,001 ° Control: FANUC 31i-B Rapid Travel X / Y / Z-Achse: 12 m/min total power requirement: 50 kVA weight of the machine ca.: 21,5 t dimensions of the machine ca.: 7,8 x 4,8 x 3,7 m Assembly 2018 - CNC control FANUC 31i-B - Tool changer 60-fold (ISO 50) - Coolant system with IKZ 20bar - Chip conveyor - Renishaw OMP 60 - Universal milling head - Angled table (2) - CE only approx. 800h running hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Behringer HBM 540 A Automatic Band Saw Year of manufacture 2005 Flat working area 630x540 Round 540mm Motor power saw drive 11KW Cutting speed 20-200m/min Feed roller conveyor driven 8750mm Width 1100mm Discharge roller conveyor not driven 5020mm width 910 Conveyor The offer is aimed exclusively at tradespeople within the meaning of §14 BGB no sale to private individuals

sheet width: 2035 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 4145 kg dimensions of the machine ca.: 3300 x 1550 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The d ...

sheet width: 2540 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 6275 kg dimensions of the machine ca.: 3900 x 1700 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The d ...