METABO ds used machines

Industrial polishing machines Hau and Metabo For sale are polishing machines from HAU and Metabo Metabo 7777 SL63-44 HAU HR4 10948 HAU SMP P850 See photos and installation plan plus accessories/spare parts (a.a. polishing paste feeder) together 4.5 - 5.3 tons. These have been standing unused since 2019 in 58-100 Świdnica in Lower Silesia in today's Poland. Until 2019, these were used in ongoing production in the Munich area and then brought to Poland to continue working with them there. However, the project in Poland was never implemented. Pricing: FOT 58-100 Świdnica, Poland, lashed to pallets. Viewing by arrangement. The photos are still from the original location in Munich. More photos on request

- double-sided bubbling machine Metabo 7445 - Metabo 72730 - 4 kW - shaft diameter 35 mm - 1500 min-1; ready for use

- double sided brishing / deburring machine Metabo 7445 / Metabo 72730 - 4 kW - shaft diam. 35 mm - 1500 rpm; ready for operation

Metabo welding machine

Band saw Metabo BS260 Swift, year 2006, very good condition, 260 watts, 230 V, 1712 mm belt length, 40 kgPrices subject to change, errors, printing and typesetting errors excepted

spindle moulder, spindle moulder -Manufacturer: Metabo, swivel table milling machine type Tf 1690 D with support table -Drive: 2.0 kW -Milling spindle: Ø 30 mm -Speeds: 3,000 / 6,250 / 9,000 rpm -Cutter: Ø max. 200 mm -Table length: 3600 x 500 mm -Dimensions: 3600/910/H1610 mm -Total weight: 170 kg

max. dia. of grinding wheel: 175 mm boring diameter: 32 mm max. width of grinding wheel: 25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Drilling capacity in wood 40 mm - Drilling capacity in steel 18 mm - Drilling spindle holder MK 2 - Quill stroke 120 mm - Drilling spindle speeds infinitely variable in steps - 60 - 2840 rpm - Max. distance table – drilling spindle 600 mm - Boom / unit tiltable left + right 45° each - Boom / unit swivel left + right - Table size 450 x 450 mm - Drive 400 V / 0.33 / 0.55 kW - Space requirement approx. W 500 x H 1870 x D 1200 mm - Weight approx. 150 kg

volt: 380 V : . quality: schwere, stabile The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: 45 ° Length of the rolling table: 1800 mm cutting width: 250 mm Motor output: 2,5 kW Cutting height: 80 mm Cutting height at 45°: 53 mm Saw blade diameter: 250 mm Speed: 3800 U/min. weight of the machine ca.: 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dust suction hood: 100 mm Motor output: 1,1 kW Air consumption: 720 m³/h Dimensions (L/W/H): 1150 x 515 x 1640 mm Weight: 82 kg : m³/h : mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.47 kW -Speed: 3,000 rpm -with stand -Max. grinding wheels: Ø 200 x 25 x 32 mm -Operating voltage: 380 volts -Dimensions: 540/540/H1100 mm -Weight: 68 kg

Valmet-Sisu engine type= 612/634 DS/DSE-135KW fully repaired engine with starter, alternator in exchange. info@miw-zeven.de

Pistons from MAHLE ETNR. 1350082 Suitable for Scania DS11 or other

Centrifugal compressor in landfill gas use. Technical data sheet located as an attachment. The compressor is located in a very good condition, is until end of July 2018 in the operation and is very robust (casing). Pressure difference 180mbar and 15 kW drive motor. Radial blower used for landfill gas utilization. Technical specification see attached data sheet. The blower is in good technical condition and still in operation on a bio-gas plant in Germany untill end of July 2018. Pressure drop 180 mbar with 15kW electrical drive.

Hose pump for conveying corrosive, abrasive, highly viscous or highly dense liquids. Due to its simple design, the pump is self-priming, low-wear and dry-running. Manufacturer: Delasco Type: DSC65PA1S Y.O.M.: 10/2001 Q= 3.1 a / 14.95 m3/h P= 15 bar with geared motor SEW-Usocome 220/380 V; 11 kW; 1440/ 7.2/44.0 rpm Inlet opening approx. 55/100 mm Total approx. 1400 x 1300 H 1150 mm

Valmet/Sisu Engine Type=612 DSE-135KW, Factory Repaired Engine with starter+alternator.New TOP-MOTOR !!! info@miw-zeven.de

SISU/Valmet engine type=612DSE,135KW,6-cylinder series with turbocharger. Motor is complete with starter+alternator,factory repaired. 1 year warranty !! info@miw-zeven.de

Discus level sanding machine with Vertikaler-Schleifspindel and Schleifradaufnahme f?r Ceramische-Schleifsegmente. Construction year 1957 the machine is technical and geometrically in very good state. it was waited up to Au?erbetriebsetzung 2006 regelm??ig. hydraulic table impulse: infinitely variable adjustably vertical delivery: hydraulically Schleifrad-Durchme?er: 600 mms impulse achievement: 22 kW Magnetabme?ung: 300 x 1,000 mms Schleiftischabme?ung: 400 x 1,700 mms

We offer a general overhault exchange engine with 12-month guarantee with starter+altenator . We are an Agco Sisu diesel service partner and obstruct / sell only original spare parts. Please contact us: MIW GmbH Motoren Instandsetzungs Werk Nord West Ring 8 D-27404 Zeven-Germany Tel:0049 (0) 4281-950583 Fax:0049 (0) 4281-950585 e-mail: info@miw-zeven.de abc. miw-zeven.de

used, good condition from plant disassembly 1x ELTRA DSG10.0 three-phase transformer - Year of construction: 09/10 Power: 10 kVA at 100% ED Prime: 3x 200 V - 210 V - 240 V / 3x 29.5A Sec.: 3x 400 V / 3x 14,4 A 50/60 Hz Isol.Kl.: ta40°C/B Circuit: Dyn5 Cooling: AN Space requirement LxWxH: 670 x 490 x 660 mm (mobile with rollers) Price is plus VAT free loading Warehouse Gießen - shipping possible by arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sales reserved The machine is electrically and mechanically tested before sale and receives a DIN VDE 0113 test report, which is part of our service.

Dry air dryer No.: OD4 2201-4639 8.8 kW 400 V 50 Hz with funnel and auxiliary heating: T200 IX IZ 525-4639 Type: F2 Nr: 1AL 5153 4639 1,1 KW 400 V 50 Hz

Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of sanding units: 2 St. sanding width: 290 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.