MASSON rsd used machines

MASSON RSD 401 RATIO 4,625:1

N:18559 Date:27 12 85 Type:RSD 281 ratio: 4.704:1

MASSON MARINE GEARBOX RSD 201 / 3.978:1

MASSON MARINE GRAR BOX RSD 401 REDUCTION 4,625:1

MAsson gear Box Marine W 8000 C Ratio 1.98:1 power 1410 KW @1000 rpm Building year 2005 low hours

MASSON MARINE GEARBOX

USED MASSON MARINE GEARBOX

MASSON MARINE GEARBOX NGC / REDUCTION 4.583:1

Gearbox due to re-motorization PTO drive shaft is inclusive Reduction 4,987:1

Removed in rotating condition due to re-engine Incl. propellor shaft flange and original oil pit

Reference number 20115 Brand Gearbox MASSON Model Gearbox 3450 Ratio 4,913:1 Power 650 kW - 1500 rpm Serial number 27140 General condition EXCELLENT Status AVAILABLE SPECIFIC INFORMATION Sae housing SAE 0 / SAE 1 Flexible coupling YES AND ALU. FLANGE Controls NO SPECIFIC FEATURES Brackets YES Oil cooler YES Pto NO DIMENSIONS LxWxH (cm) 9080 mm x 8090 mm x 1130 mm Weight (kg) 1350 KG

MASSON RCD 800 (W8000) 1216 kW /1600 rpm SN 22123 Ratio 3.538:1 1216 kW 1600 RPM Used in excellent condition Available Mechanical Controls Weight (kg) 1800 Dimensions (cm) 125 X 115 X 140

LISTING ID:22745 BRAND: MASSON MODEL: NE3 RATIO: 1:2.44 POWER: 208 kW(279 HP)2100 RPM SN 22440 HS CODE: 84836080 CONDITION: NEW

LISTING ID: 22744 BRAND: MASSON MODEL: RSA 60 RATIO:1:1.390 POWER: 153 kW (205.5 hp)2100 RPM SN 16341 HS CODE: 84836080 CONDITION: NEW

LISTING ID: 22741 BRAND: MASSON MODEL: ZFW (MM) 12000 C RATIO: 1:2,747 POWER: 1369 kW (1835 bhp) 1800 rpm WEIGHT: 2530 DIMENSIONS: 110 x 148 x 143 (h)(cm) HS CODE: 84836080

LISTING ID: 22741 BRAND: MASSON MODEL: ZFW (MM) 12000 C RATIO: 1:2,747 POWER: 1369 kW (1835 bhp) 1800 rpm WEIGHT: 2530 DIMENSIONS: 110 x 148 x 143 (h)(cm) HS CODE: 84836080

BETEX 24 RSD - heated up to 150 kg Workbench model with swivel arm Applications: Chemical industry, steel industry, paper industry, transmission manufacturers, mechanical engineering, transport sector Voltage / Frequency / Power: 230 V / 50-60 Hz / 3.6 kVA Properties: When warming in a horizontal position, the maximum effect is achieved. Workpiece: Weight bearings max. 150 kg (other workpieces 80 kg) Inner diameter 15/120 mm Outer diametermax. 520 mm Width max. 200 mm Automatic temperature: Magnetic probe, control range up to max. 240 °C Aperture priority: Time range 0 to 45 minutes Bays: Edge length 14, 30, 60 mm

Single column hydraulic press, straightening press, punching bracket ECKOLDPressen frame with hydraulic cylinder, mobile press, punching unitType RSD 1500 - 125Masch. No. 317 / 690 Year of construction approx. 1986Compressive force 150 ton. Projection 125 mmSlide stroke 35 mmTable size 280 x 210 mmPlunger area 125 mmInstallation height (plunger to table) max. 265 mmTable height above floor 403 mmHydraulic operating pressure max. 500 bar- without hydraulic unit- Lifter surface with 4 threads M16 and 20 mm guide groove, one centering hole in the middle 15

Temperature controller, temperature control unit, temperature regulator, modular temperature control unit, tool heater -Manufacturer: PSG, temperature control unit for tool heating with up to 8 control zones -Type: RSD II 8 -P max: 21 kW -Dimensions: 490/400/H490 mm -Weight: 30 kg

Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 -P max: 28 kW -Transport dimensions: 490/430/H460 mm -Weight: 30 kg

Key data: 280 mm, 250 mm

Control Type: CNC Control: Eltropilot 2 Turning diameter over bed: 280 mm Turning diameter over face slide: 185 mm Turning length: 250 mm Spindle bore: 50 mm Bar Passage: 34 mm Tip height: 240 mm Revolver Sauter: 12 stations 8 driven VDI 20 Rapid traverse feed: 12 m/min Tailstock Quill Holder: ML 3 Collet holder: ER 25/32 Power requirement: 18 kVA Weight approx.: 2.8 t Dimensions approx. L x W x H: 2180 x 1610 x 1730 Power Chuck Berg 140 1 set of hard jaws, various sets of soft jaws, 100 Collets 171 E 5 - 36 mm 6-point, 4-edge, intermediate and special sizes, Tool holder VDI 20 59 pieces radial right and left, Drill rod holders, Parting Sword Holder, Powered Brackets Sauter VDI 29 1 x radial, 1 x axial, Turret Alignment Mandrel Ground Type Chip conveyor with water pan and additional coolant pump Documentation complete 1999 General ...

Kontron 325 Tenar Low Pressure Gradient Pump Pump HPLC up to 10mL Pumping System -Pump system for tenary low-pressure gradients -All devices for low-pressure gradients integrated in one solution system -10 programs with individual instructions -Column Shock Protection extends durability-Intelligent commissibility compensation -Stackable with other/other HPLC modules -Full control of the AUtosampler 360 via the keyboard with a display Type: double series piston wetted Materials: SS 316, PTFE, KEL-F, ceramic, ruby and sapphire Flow: 0.05 to 10 mL per minute Flow Rate Precision:

CONTROLS   electronic controls SIEMENS S7 300 PRESS DESIGN   drive system: eccentric / crank   openings in uprights: yes   number of suspensions: 2   table cushion: no   quick die change system: yes PRESS FORCES   total force (nominal): 250 to PRESS TABLE   table surface (left-right): 2000 mm   table surface (front-back): 1100 mm   height above floor level: 1105 mm   opening in bed (left-right): 1700 mm   opening in bed (front-back): 305 mm SLIDE   table surface (left-right): 2080 mm   table surface (front-back): 1000 mm   stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm   stroke adjustment: yes   stroke min.: 20 mm   stroke max.: 180 mm TOOL ASSEMBLY DIMENSIONS  & ...

Caterpillar C32 - Unused - 781 kW - RSD