13 MAHR used machine for sale

Outside micrometers, micrometer screw, outside micrometer -Manufacturer: Mahr, outside micrometer -Measuring range: 225-250mm -Reading: 0.01mm -Locking device -other sizes: also available -Dimensions box: 400/230/H30 mm -Weight: 2,2 kg

Lever gauge, dial gauge, probe, probe, centering device -Manufacturer: Mahr, Millimess dial gauge -Measurement range: 0-50 µm -Reading accuracy: 0.001 mm -Dimensions case: 110/80/H20 mm -Weight: 0.2 kg

Micrometer screws, micrometer screws, tooth width measurement, plate measuring surfaces -Measuring range: 50-75 mm -One rotation of the drum corresponds to: 0.5 mm -without locking device -large measuring surfaces -Measuring force: Ratchet -Including: case -Adjustable dimensions -Hand protection -Quantity: other sizes also available -Weight: 0.7 kg

Measuring machine, coordinate measuring machine, form tester -Handover: in current condition as viewed -Calculator missing, x-axis damaged (Carriage guide defective) -Manufacturer:Mahr, form tester type MMQ 40 -Measuring height: 490 mm -Technical data: see photos documentation -Accessories: incl. calibration and measuring accessories / technical documentation, see photos -Dimensions: 700/450/H900 mm -Total weight: 218 kg

This optical measurement machine was manufactured in 2018. The MAHR MahrShaft SCOPE 250 plus features a high-resolution CMOS matrix camera, integrated 21 touchscreen monitor, and a CNC MarEcon control system. It supports a measuring length of 250 mm and can handle workpieces up to 100 mm in diameter and 5 kg in weight. If you are looking to get high-quality measurement capabilities, consider the MAHR MahrShaft SCOPE 250 plus machine we have for sale. Contact us for more information.

Mahr Perthene Perthometer S4P Roughness Meter 1 x Mahr Perthene Perthometer S4P Roughness Meter 1 x Mahr Perthen 6 86 20 63 1 x Mahr Perthen 42 50 01 50 to 160 mm Ø Find more Roughness Gauges in other sizes - new and used

Measuring dimensions X/Y/Z: 610mm/610mm/200mm, resolution: 0.1µm, measuring speed: 250mm/s, measuring type: multisensor (video, laser, mechanical test probe), software: OptiCheck 3D 4.5 (MahrVision 3D), touch probe: TP200. 3x servo amplifier, X- and Y-axis motor were newly purchased. The machine was calibrated in December 2023. The machine has an electrical whirring noise that comes from the servo amplifier card. Documentation available. On-site inspection is possible.

max. wheel diameter: 400 mm gear width: NA mm max. module: 5 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manual Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 120 mm gear width: 160 mm max. module: 3 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I offer here 2 pieces of fine indicator throat gauges from Mahr so-called Marameter F 1 x 25-60 mm 1 x 50 - 100 mm in very good condition immediately ready for use and tested for function the two devices are delivered as shown in the pictures

Mahr 865 SE Indicator Calibrator Mahr 865 SE indicator calibrator with 1505 IC indicator + 1299 IC/S printer Height-adjustable table More indicator calibrators in other sizes - new and used - can be found in our shop! International shipping costs on request!

This 3-axis MAHR MarSurf CD 140 CMM machine was manufactured in 2022. It features a contour probe system with a resolution of up to 6 nm and a traversing length from 0.1 mm to 140 mm. The machine supports a workpiece weight of up to 90 kg and offers adjustable measuring forces from 4 mN to 30 mN. If you are looking to get high-quality contour measuring capabilities, consider the MAHR MarSurf CD 140 machine we have for sale. Contact us for more information.