KIEFEL km used machines

Kiefel Speedformer KMD78 BFS Thermoformer with in-mold trimming using steel rule Knives., Age 2012, Suitable for PS, OPS, EPS, PP, PE, PVC, APET or CPET., Motor Indexing of sheet, Double Heating, Auto Transport Rail spreading for PP, Auto-sheet sag control, Film width max. 810 mm, Max. Form Area 760 x 540 mm, Max. negative/ positive Forming height 150 mm above and below sheet level, Dry Cycle rate 60 strokes/ min, In Mold trimming using Steel-Rule Knives, BFS Punching force: 650 kN, * Machine equipped with: film Indexing, infrared heating (top and bottom), forming and in-mold punching unit, Inline SPEED STACKER Counter/ Stacker, residual film rewind, outfeed conveyor, manual removal, Siemens SINAMICS controls and touch panel HMI.

Material : PP // Forming Area (Vxh): 825 x 675 mm

A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefe ...

This KIEFEL KLS 86/235 was manufactured in 2011. It features a maximum forming area of 860 x 2350 mm and a maximum forming part height of 350 mm. The machine is equipped with a powerful vacuum system with a suction power of 2 x 300 m³/h. If you are looking to get high-quality laminating capabilities, consider the KIEFEL KLS 86/235 laminating system we have for sale. Contact us for further details.

Thermoforming Machine Brand: Kiefel, model: 76/225F. It shapes and cuts by vacuum pieces from rolls of PPE that are previously heated in the oven. Everything goes online, fully automatic and includes all empty aurxiliars, refrigeration, mold change trolleys, etc. Forming area: 760x2250 mm max, workpiece height: 220 mm pos. max, 30 mm neg. max, upper cutting force: 30 KN, lower cutting force: 30 KN, sheet line: 1575 mm, vacuum: 500 m 3/h, cycle time: ca. 20 sec (material dependence), glue type: butyl or hot melt glue, glue application speed: mx. 400 mm/sec (depending on the contour and type of glue), applicator head control: amount of glue depending on speed, tool change time: less 5 min, measures: 25500x6000x4600 mm.

Kiefel Roller Sheeter

Drive : 12 KW

Technical details material.: OPS, APET, PP, HIPS, ABS Forming area (VxH): 520 x 400 mms Depth of draw: 120 mms of material thickness (max.): 1.50 mms of technical details heating, moulding and cutting. This machine has the BFS system which allows to cut in place in the forming station Forming area: 520 x 400 mms of Max sheet width: 590 mms No of cycles are very much depending on the product. However we have been producing more different products with up 50 cycles by minute, but they were no deeper than 40 mms. All movements are 140 mms with a recommended max. depth/hight of 120 mms We have been producing OPS, APET, PP, HIPS and ABS on the machine. The read few years mainly HIPS and APET The thicknest material we have been producing, were 2.0 mms HIPS, but I wants recommend more than 1.5 mms HIPS.

HF welding machine with sliding table - 1.1 KW

Material : PS, PP, PE, PVC, A-PET // Forming Area (Vxh): 535 x 390 mm

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

KRAUSS MAFFEI TWIN SCREW EXTRUDER (photos before reconditioning), Mod.KMD 2-90 KK, used for profiles, n.2 parallel screws diam. 90 mm 20 L/D Max 30.5 rpm, 40 kw d.c.drive, installed power 180 kw, feeding hopper, max production with PVC profile 240 kg/h, complete with control cabinet, Heating 28.5kW,, 5 Zones Heating and 2 Last Barrel Oil Cooling Barrel +1 Zone Adapter 4 Zones Double Die, degassing point, Measures 4.3 L x 1. 2 W x 2.3 (m) H (incl Hopper) ,, Approx.weight 4.3 Ton

Gross volume: 300 ltr. Net volume: 220 ltr. 1 x Head Material: mild steel.

maximum board thickness. 800 gsm Corrugated board types: N, E, F Speed 400 m / min. Max. Inching 10 m / min. maximum thickness of the folded box 20 mm maximum inlet width 1100 mm Dimensions 15 x 1.70 x 1.90 m Weight 7.6 T required power 15 kW required compressed air 6 bar Compressed air capacity 60 L

1 pc new and unused

used spare part IMM - Column warehouse no.: 501285 manufacturer: KRAUSS MAFFEI Typ: Saeule year of construction: neu Column for intensifier match the machine size Krauss Maffei 501285 There are a total of 6 columns available, they are brand new and unused. Total length 965 mm, diameter 124 mm piston, piston rod diameter 85 mm.

Swiss type CNC Manurhin KMX TWIN 207 is a double-spindle automatic machine with automatic feeding of bars. The CNC lathe was produced in 2000 in France. Technical data : - type of automatic lathe: Swiss Type - control: NUM - Swiss control - number of axles: 6 - turning diameter up to: 20 mm - diameter of passage Ø: 28 mm - number of turns: 150-8000 rpm - feed: 10/15 m / min - number of tools: 8 + 8 + 4 + 4 pcs - spindle power: 2.2 kW - tailstock: counter spindle - machine weight: 5000 kg Lathe equipment: - two main spindles / two opposite spindles - material feed with FMB Doppel-Turbo - counter spindle: 150-6000 rpm - chip conveyor - Manurhin / Schlichting-System clamps - coolant filtration

Coolant storage device consisting of metal tank (tank size: 16 litres), coolant pump, hoses and fitting.

workpiece length: 3250 mm swing diameter: 630 mm grinding wheel diameter: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Serveral Steadies Dresser Cooland System The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used 2 row Fortuna head machine mobile maximum hourly output 2400 pieces per srtück.Compact machine robust construction easy cleaning.Payment and delivery on request. Weight range 35-80 grams round buns 2-row Painted on rolls checked and cleaned Dimensions: Height: 170 cm Width: 100 cm Depth: 70 cm

Gallus KMS 510 Unwind, E+L Web Guide, Teknek Web Cleaner, Arcotec Corona Treater, Infeed Tension Unit, 9 x Servo Flexo Units, Multi stream hot foil unit, Turning Tower Lamination Unit, GEW UV System, Chill Rolls, Waste matrix tower Rotary die cutting/embossing unit Register Control, Sensotec Web Inspection System AVT Video Control BST Chiller HYFRA Print cylinder 116 Anilox 29 Gallus FSM 510, 20" Flatbed Diecutters Web decurling unit two decurlers, one on the press and one on the die cutter Windowing/Stripping unit Belt delivery unit many accessories

Complete gate line , with log task - Remote controlled clamping car - Gate Müller with sideware crosscut saw, complete mechanization, cut saw Paul S900 SH 180 mm, sour paul KME II /1000, chopping system Rudnick&Enners 200/600 etc.......

Offer via gebr. Thread cutting machine with pipe saw RA21 Made GEORG FISCHER type KM2, built 1997 Technical data: Thread diameter 3/8" - 2" Power connection 200 - 240 V / 50 Hz With mobile undercarriage with threaded cutting jaws 3/8", 1/2", 3/4", 1", 11/4", 11/2",2" used, in good condition.

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type KMO 56 K 4 -Power: 0.12 kW -Speed: 1360 rpm -Shaft: Ø 11 x 20 mm -Construction: B3 -Dimensions: 153/110/H145 mm -Weight: 4 kg