HOMAG vf used machines

Manufacturer: Homag Postforming, Type: VFR10/22, Year: 1997, Control: Homatic/NC 16, Software: Homag, Finished product: Türzargen/Verkleidungen, Indirekt Postforming: yes, Work piece width min-max mm: 60-1000, Min.-max. workpiece length in mm: 800-2500, Min.-max. workpiece height in mm: 16-28, Workpiece protrusion mm: 55-30, Profilarten : L-Profil/U-Profil, Postformig Fräsaggregate Stück/kW: 2 X 1 kw, Universalfräsaggregat Stück/kW: 2 X 4 kw, Leimauftrag für Profile mm: U-105, Düsensystem: yes, Furnierbefeuchtung: yes, Heiz und Ablüftstation: yes, Profildruckstrecke: yes, Fräsaggregat : yes, Fräsaggregat U-Profil/Nuten: yes, Year :1997

Single sided postforming line, capable of doing L - and U profiles, with or without insert. Workpiece thickness: 16 to 60 mm. Min. workpiece width: 150 mm. Workpiece overhang: 70 mm. Max. laminate overhang: 105 mm. Feed speed 3 - 18 m/min. Fence side at the left Equipment: Squaring and shaping part: 1 x Postforming squaring unit, 2 motors each 1kW, 1st motor removing the laminate, 2nd motor trimming the overhaning laminate 1 x scoring, motor 1 kW, top position 1 x milling unit for the laminate when doing U profiles 1 x laminate support Postforming part 1 x blow cleaning nozzle 6 x glue nozzle for the glue application 2 x glue roller 9 x IR heating, each 2,2 kW 2 x Hot air blower, each 10 kW 1 x Basic postforming pressure zone for L-profiles, using rollers 1 x Basic postforming pressure zone for U-profiles, using rollers 1 x VF postforming pressure zone for special profiles, using pressur ...

Fixed side at the left Panel thickness min/max: 16/45 mm Min. panel width: 150 mm Lateral panel support for panel width up to 900 mm Min/max. panel length: 700 / 3100 mm Max. laminate overhang: 110 mm Max. laminate thickness: 0,8 mm Radius min/max: 6 / 22 mm (depends the laminate) Feedspeed max. 18 m/min Top pressure by belt Equipment: Infeed fence, adjustable, defines the panel overhang 2 x trimming unit 0,4 kW, HSK 25 toolholder 1 x PVAc glue application 5 x glue nozzle, adjustable 1 x hot air blower 3 x IR heating on top (55 cm length), 3 x bottom (90 cm length) Postforming zone 1,8 m. length Various pre-installed profiling sets 1 x top trimmer 0,4 kW

A high-performance Homag Edgebanding Line paired with a Ligmatech Automatic Return System. This combination allows for a "one-man operation," where the machine applies the edges and then automatically sends the panels back to the operator for the next pass. Below is a professional draft for an online listing. --------------------------------------------------------------- For Sale: 2007 Homag Optimat Edgebanding Cell Featuring: Homag KAL 310 Edgebander & Ligmatech ZHR 05 Return System This is a complete, industrial-grade edgebanding solution manufactured in Germany. The set consists of a high-speed Homag KAL 310 single-sided edgebander and a Ligmatech ZHR 05 Boomerang return conveyor. This setup is designed for high-volume production, significantly reducing labor costs by allowing a single operator to manage the entire infeed and outfeed process. Machine 1: Homag Optimat KAL 310/10/ ...

Tax cards -Replacement cards for: -Homag Type: KFL 53 -Homag Type: KFL 54 -Homag entrance cards -Homag control cards -Homag controller cards -Cabinet: only sold as a complete unit -Weight: 200 kg

Weinmann Profi WBZ160 Brand: Weinmann Type: WBZ160 Profi Year of Make: 2014 Control PC86, Wupworks, Schuler MDE, woodScout Homag Power Control: Homatic Power Control - Homatic CNC System PC85 with Windows XP (US) embedded industrial PC Selection menu, Alarm texts in plain text, Ethernet connection, Remote diagnostics, Post-processor connection - 1 hard drive - 1 hard drive for data backup - 1 CD-ROM drive - 1 USB port - Colour monitor 17 inches with PC keyboard and mouse The data for the processing of the individual bars can be transferred directly from the CAD system via LAN/USB stick/CD. Optionally, the data can be entered directly on the machine. Machine operation by one person. Includes automatic collection. Fully integrated cutting optimization. Specifications: Workpiece length max X: 13,700 mm Workpiece width max Y: 405 mm Wor ...

A CNC dual spindle woodworking machining system Homag is available. Travel speed: 35m/80m/25m/min, C-axis: 360°, A-axis: +/-100°, Z stroke: 600mm. Workpiece length range: 2450mm/17400mm, max. workpiece width: 1900mm, max. workpiece thickness (incl. clamping devices): 300mm. Main spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, saw blade diameter: 350mm. Second spindle power: 18.5kW, speed: 24000rpm, tool holder: HSK-F63. Tool positions: 18/2x10. Total system dimensions X/Y: approx. 19000mm/6300mm, control: Homag. Including underfloor milling unit Homag, 3xtool changers, pickup position, clamping platforms, vacuum clamps, workpiece lifter, laser and additional units. Documentation available. An on site inspection is possible.

Manufacturer: Homag Eckenkopierschwabbeln, Type: FS 11/FS 10, Year: 1996, Ersatzteil aus Maschine: Homag KF, für Maschinenseite links: yes, für Maschinenseite rechts: yes, Polieraggregat: yes, Eckenkopierenfunktion: yes, Motorenanzahl: 1, Bürstendurchmesser mm: 2 X 140*50*17, Bürstenbreite mm: 50, Volt/Hz: 380/50, Horizontal Rollentastung: yes, pneumatisch ansteuerbar: yes, Bürstendurchmesser mm: 2 X 140*50*17, Bürstenbreite mm: 50, Volt/Hz: 380/50, Horizontal Rollentastung: yes, pneumatisch ansteuerbar: yes, Year :1996

Homag modular unit, mould processing unit, milling unit, shape milling unit, double-end profiler, edge processing machine, milling motor for edge processing machine -HOMAG milling unit with Perske motors -with keying of 2 sides each -Milling unit: swivelling -1x Motors Perske DVMS 1504/2 -Power: 2.0 kW -Voltage: 165 volts - Frequency: 300 Hz -Speed: 17,500 rpm -1x Motoren Perske DVMS1504/2 -Power: 2.0 kW -Voltage: 165 volts - Frequency: 300 Hz -Speed: 17,500 rpm -Dimensions: H600/W340/D450 mm

Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 2000 M-No.: 4-02078 000W04206041 Nmax: 9,900 rpm

Homag Profi KAL 310/8/A3 with Power TVL 100/15/LQ/S and Profi KAR 330/7/A3/WZ – built in 2013, For sale is a high-qualityHomag edge banding machine Profi KAL 310/8/A3, built in 2013, combined withPower TVL 100/15/LQ/S and Profi KAR 330/7/A3/WZ,, ????State: Very good, well-maintained condition, ????power: Efficient and precise processing for the highest quality standards, ????Equipment:, ✔ Fully automatic edge processing, ✔ High flexibility for different materials, ✔ Integrated feedback for optimized production processes, ✔ Robust and reliable technology from Homag, Ideal for professional use in wood processing!, Please contact us for further details or to arrange a viewing., Subject to prior sale, changes and errors!

Manufacturer: Homag aus Homag KF 20, Type: Ein und Ausgangskarten Streckensteuerung,

Manufacturer: Homag, Spare part from machine: Homag Fräsständer ohne Motore, for left machine side: Linke und rechte Seite, Pneumatically controlled: yes, FREE TEXT: Nur Ständer ohne Motore/mit seitlichen Schwalbeschwanzführungen,

Manufacturer: Homag, Type: FL 62/25, Year: 1988, Maschinensteuerung: Homag, Min.-max. workpiece length in mm: 250-1500, Min.-max. workpiece height in mm: 3-80, Cam distance mm: 900, Feeding speed min-max m/min: 5-40, Feed stepless: yes, Min-max protrusion of workpiece mm: 30, verängerte Kette mm: 900, Nockenaushebung: no, gesteuerte Fräsaggregate: 2, Scoring saw controlled: yes, 1st milling unit kW / rpm: 4,5/5890, 2nd milling unit kW / rpm: 4,5/5890, Year :1988

Manufacturer: Homag Doppelzerspaner mit Schutzfräsen, Spare part from machine: Homag, for left machine side: yes, Number of motors: 3, Motor : Perske, kW-Leistung : 3/4,4, Volt/Hz : 50/100, Drehzahlen U/min : 2880/5860, Siko Anzeige : yes, Pneumatically controlled: yes/mit Revolver, Slewable horizontal 3: yes, FREE TEXT: Nur Ständer ohne Motore,

Manufacturer: Homag, Spare part from machine: Homag Kf, for left machine side: links, Number of motors: 1, Motor : Perske, kW-Leistung : 4,4, Volt/Hz : 100, Drehzahlen U/min : 5860, Pneumatically controlled: yes, Shaft dimensions L x D mm: 30, Slewable horizontally: yes, pneumatisch gesteuert : yes,

Manufacturer: Homag Getriebe Verstellung Oberdruck/Maschinenhalter Bett, Type: auf KF Homag, FREETEXT1: 3 Verstellgetriebe, FREETEXT2: 4 Winkelhalter Bett,

Manufacturer: KEB Homag Umrichter, Serial number: 07.F0.R01-1228, was installed in machine: Homag Maschine, Production number: 95150305/129518, Frequency converter: yes, Power Output: 750, FREE TEXT: 750 W 2/4 50/60 Hz,

Manufacturer: Homag, Type: NFL 26/6/10/PW/L, Year: 2002, Control: Homag, Work piece width min-max mm: 136-250, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-25, Working width min-max mm: 136 - 250, Feeding speed min-max m/min: 15 - 60, 1st milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 2nd milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 3rd milling unit kW / rpm: 6,6 kW Profilfräsen 6000 U/min, Free space for units: 2x 460 mm, Machine overhauled: no, System dismantled: yes, Year :2002

Manufacturer: Homag, Type: Ritzsäge Nachschwenkeibrichtung für links und rechts, From machine: Homag FPL, Shaft dimensions L x D mm: 1200,

Manufacturer: 2 StückPerske, Type: Ritzmotor Homag FPL 526, Motor with gear: KNS 51.14-2 D, From machine: Homag Maschine, Spindle length mm: ca.60, Diameter of the spindle mm: 30, Power kW: 1,0/2,0, Volt/Hz: 50-60-120, pm: 2750/5700/3380/6920, Motor with gear: KNS 51.14-2 D, Price per unit Euro: 600, FREE TEXT: Spindeldurchmesser 30/Länge mm ca. 55 mm,

Manufacturer: Homag, Type: Motorhalterplatte mit pnematischen ein und Ausrücken, From machine: Homag FÜL 526,

Manufacturer: Kraft-Homag-Viet, Beabeitung: Rohlinge Kaliberieren-Formatieren-<CRLF>Fälzen und Kaliberieren, Herstellung von: Innentüren, Work piece width min-max mm: 1300 X 2200, Min.-max. workpiece height in mm: 10-60, Min.-max. workpiece length in mm: 50-2200, Manufacturer1: Bargstedt, Machine type1: Beschickungsanlage doppelseitig, Year of manufacture1: ca 2000, Manufacturer2: Viet Kalibrieranlage, Machine type2: 4 Aggregate Walze/Schuh, Year of manufacture2: ca.1998, Manufacturer3: Homag Doppelendprofiler, Machine type3: Längsprofilerer, Year of manufacture3: Überholt 2004,

Manufacturer: Homag Vorschmelzeinheit, Spare part from machine: aus Homag KF, Type: Q/34, Gluing part left side: yes, Plug connection: yes, Temperature control: no,

Manufacturer: Homag, Type: 20/50/16/V/G, Year: 1998, Control: Homag, Program: WoodWop , Program version: 5.0, Working range X: 5.600, Working range Y-axis: 1.600, Working range Z: 60, Number of milling spindles: 1, Milling engine 1 hours power: 12, Number of tool magazines: 1, Number of tools per tool-magazine: 12, Vertical drills-X: 5, Drill vertical Y: 4, 2 station allocation: 2, raster table: yes, Vacuum pumps Qty: 2, Saw unit: yes, Edgebanding unit: yes, Year :1998