HOLZSTAR hbs used machines

Holzstar KSO 750 Edge Grinder With oscillating sanding belt for good removal performance, a clean grinding pattern and a longer service life of the sanding belt With height-adjustable grinding table Standard with -45° to +45° infinitely adjustable miter and workpiece stop Infinitely inclined grinding unit (0°-90°) for vertical and horizontal grinding Table height adjustment by means of handwheel Robust work table made of cast iron with T-grooves, stable stand of the machine when working With height-adjustable additional table for contour grinding Fast and easy sanding belt change via quick clamping system Spring-loaded clamping device for uniform belt tension Abrasive sole with graphite coating as standard Suction nozzle Ø 100 mm With lockable storage option in the standard substructure Equipment details: Thanks to the infinitely variable grinding unit, the edge gri ...

SAA 2001 Aspirator Suction nozzle on the device 125mm Suction nozzle on the distributor 100mm Height 2000mm Weight 47kg Motor 1.5kw 230V 50Hz Nominal volume flow 2553 m³/h G&STÜ-5922201

SAA 2001 Aspirator Suction nozzle on the device 125mm Suction nozzle on the distributor 100mm Height 2000mm Weight 47kg Motor 1.5kw 230V 50Hz Nominal volume flow 2553 m³/h G&STÜ-5922201

N E U M A S C H I N E! OUR MOST SOLD! Bandsaw HBS 470 400V 3 HP S 1 Cutting height of 290 mm 465 Mm cutting width 475mm solid wheels Precision roller guides 3454mm band length Work plate, swiveling Weight: ca. 180 kg G & HM-HBS470 SPECIAL PRICE NET OF 999.-

Packing machine of the SIG type HBS With a Siemens S7 control If you have questions you can me any time call. Phone: 0049 1718367957 Mobile phone: 0049 1718367957

N E U M A S C H I N E! Bandsaw HBS 473 400V 3 HP S 1 Cutting height of 290 mm 465 mm cutting width 475mm solid wheels 3 rolls of precision roller bearings 3454mm band length Work plate, swiveling Weight: ca. 180 kg SPECIAL PRICE NET OF 950.-

Standard equipment torsion-resistant, robust cast-iron saw frame driven shaving brush powerful industrial worm gear motor automatic shutdown after cutting end mechanical saw band tension with electrical band breakage monitoring Quick-release vice, movable Hydr. Saw frame lowering with rapid response function (infinitely adjustable) electric coolant pump Precision carbide saw band guides, ground (adjustable) large-sized round support table, with miter cuts, miter indicator (scale) to the operator side direct switching from manual operation to downing mode easily removable chip collecting tray Material stop 500 mm with scale incl. saw band combing gearing 4/6. Techniche Data Motor three-phase current 400 V, pole switchable 1.1/1.5 kW Saw band Dimensions 2720 x 27 x 0.9 mm Flywheels 300 mm Cutting speed 40/80 m/min. Vice-height span 275 mm Working height 978 mm Weigh ...

HBS 433 Band saw Motor: 1.5 KW / 400 V Cutting height: 270 mm Cutting width: 410 mm Roll diameter 430 mm Precision roller Guide Band length: 3345 mm Table inclination 10 °-+ 45 ° Weight: 130kg G & pieces 5154303

Hydraulic sheet metal shears in backdrop cutting design with NC - controlled rear stop - manual cutting angle adjustment and hydraulic cutting gap adjustment, maximum cutting length 3,020 mm, maximum cutting capacity 8 mm steel sheet/ST40, cutting angle 0.5° to 2° NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections deeper than 1,000 mm - optionally available with a foldable sheet metal support at the rear stop or a conveyor belt with high-stop strips, drive power 11.5 kW, dimensions 3.6 x 1.2 m, weight approx. 7,600 kg

Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg

Standard equipment Manual heavy duty band saw machine with hydraulic Sawframe reduction for miter cuts from 45 ° left to right 65° Saw frame made of sturdy cast iron construction Massive round table Oil bath gearbox consisting of bronze wheel with hardened and ground steel worm Carbide Guide and adjustable roller bearings Quick clamping Vice with additional quick adjustment and quick release lever Electric high-performance Coolant pump Mechanical blade tension with electric blade monitoring Control tool Free delivery including packaging

HBS 533 band saw new Engine: 1.5 KW/ 400 V Cutting height: 270mm Cutting width: 514mm Roll diameter 530mm Precision roller guide Band length: 3865mm Table inclination -10°-+45° Weight: 163kg

Number of sanding units: 2 st. sanding width: 390 mm Sanding height max.: 390 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Holzkraft Precision Wood Band Saw HBS 533 SET Product name: Precision wood band saw HBS 533 SET Manufacturer: Holzkraft Item number: 5155303 SET Year of construction: 01/2022 Condition: As good as new technical details: • Dimensions work table (L x W x H): 535 mm x 535 mm x 945 mm • Saw table inclination: -10° to +45° • 2 x suction nozzles • Diameter suction nozzle: 2 x 120 mm • Working table length max.: 685 mm • Work table widening length: 535 mm • Work table widening width: 150 mm • Cutting height max. 90°: 270 mm • Cutting width max. with stop: 474 mm • Cutting width max. without stop: 514 mm • Band saw blade speeds: 850/430 m/min • Band saw length: 3,865 mm • Band saw guide: precision guide at the top and bottom • Weight: approx. 163 kg • incl. band saw set, length 3865 mm, 3 pieces - 1x band saw blade wood 3865 x 10 x 0.5  ...

Bandsäge Karl Müller Cutting width 70 cm Cooling 2 cutting speeds Weight 400 kg Length 2 m Width 0.80 m Height 1.20 m

Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimension (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Cutting speed (m/min) 20 – 120 Wingspan (mm) 610 Working height (mm) 780 Machine dimension without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically redesigned, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in plain bearings Clear control panel to the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest demands on cutting accuracy Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed hydraulically incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic Full Stroke Cylind ...

Hydr. Hacksaw KASTO HBS 210 / 240Masch. No. 1116 145 220 Year of construction 1994Saw range at 90 round 210 mmflat 240 x 190 mmsquare 210 x 210 mmat 45 round 150 mmSaw blade length 400 mmStroke rates 62 / 125 strokes per min. Material support height: 500 mmMotor power: 0.5 / 0.75 kWNerg connection: 400 volts, 50 Hz- Drive motor with 2 speeds- Coolant pump in the machine baseSpace required: L x W x H: 1200 x 500 x 1200 mmWeight: 170 kgGood condition; used

cutting diameter: 225 mm saw band length: 2480 mm table height: 910 mm capacity 90 degrees: flat: 245 x 150 mm capacity 90 degrees: square: 200 x 200 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: square: 160 x 160 mm capacity 60 degrees: round: 100 mm capacity 60 degrees: square: 100 x 100 mm turning speed range:: 45/90 m/min dimensions of saw-band: 2480x27x0,9 mm total power requirement: 1,5 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 1430x720x1700 mm Scope of delivery : - saw band - workpiece stop - underframe - Manometer for belt tension - Vice with quick lock - coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch-off The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 18,5 kg Total power requirement: 0,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 840x540x1980 mm Weight: 158 kg Total power requirement: 2,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band saw HOLZKRAFT HBS 433- Exhibition machine - saw blade guide at the top, saw blade guide at the bottom, quick-clamping device via eccentric lever---------- Technical data ----------rollers Ã: 430 mm, max. cutting height: 270 mm, max. cutting width with stop: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, table size: 610 x 431 mm, table inclination: -10 - +45 Â, motor 400 V: 1.5 kW, suction nozzle Ã: 2 x 120 mm, Cutting speed: 900 / 450 m/min., Dimensions (LxWxH): 768 x 512 x 2,048 mm,

Key data: 390 mm, 390 mm

Grinding machine Löwer Type: HBS 400 Year of Make: 1999 CE Versatile single-belt sanding machine for both adaptation grinding heavy glulam beam as well as for calibrating to measure. Grinding width max. 390 mm Grinding height max. 390 mm 1 sanding shoe from above Grinding motor 7.5 kW Sanding belt dimensions 300 x 1800 mm Transport carpet for material feed Feed rates 6/11/16 m/min. Extraction connection diameter 150 mm Constant table height for the use of roller conveyors pneumatic abrasive belt oscillation pneumatic abrasive belt clamping Special HBS sanding shoe for adjustment grinding for thickness differences of up to 4 mm or crooked workpieces Selector switch adaptation grinding / calibration Motorized workpiece thickness adjustment with rapid traverse Automatic workpiece thickness scanning Heavy, robust design With some abrasive belts in 60 and 100 grit  ...

Offer 26087 Technical data: - CNC control PS 210 for material replenishment machine, - Cutting speed, cutting pressure - Separate manual operation of all functions without CNC control - Saw blade dimensions 4150 x 27 x 0.9 mm - Cutting speed infinitely adjustable 15 - 105 m/min - Cutting pressure regulation infinitely variable 0.2 - 2.0 m/min - Cutting area - at 90° around 320 mm - Square flat 400 x 280 mm - at 45° around 200 mm - at 30° Re about 170 mm - Left + right mitre adjustable with digital display - min/max section length of the material replenishment machine - for single stroke 2 / 1005 mm - Total drive 400 V / 3.0 kW - Minimum quantity coolant spraying device pneumatically supported - Hydr. Saw Band Tension + Mot. Saw Blade Brush - 2 pieces of original roller conveyor 2000 mm - Space requirement approx. W 4200 x H 16 ...

Grinding machine Löwer type HBS 400 Technical data: - Grinding width max. (mm): 390 - Grinding height max. (mm): 390 - Sanding shoe from above: 1 - Grinding motor (kW): 7.5 - Sanding belt dimensions (mm): 300 x 1800 - Transport carpet: for material feed - Feed speeds (m/min.): 6/11/16 - Connection for suction diameter (mm): 150 - Constant table height - Pneumatic sanding belt oscillation - Pneumatic abrasive belt clamping - Special HBS sanding shoe: for conforming grinding with thickness differences of up to 4 mm or crooked workpieces - Selector switch adaptation grinding / calibration - Motorized workpiece thickness adjustment with rapid traverse - Automatic workpiece thickness scanning - Machine length (mm): 1150 - Machine width (mm): 1020 - Machine weight (kg): 950 - CE compliant

Grinding machine Löwer type HBS 400 Technical data: - Grinding width max. (mm): 390 - Grinding height max. (mm): 390 - Sanding shoe from above: 1 - Grinding motor (kW): 7.5 - Sanding belt dimensions (mm): 300 x 1800 - Transport carpet: for material feed - Feed speeds (m/min.): 6/11/16 - Connection for suction diameter (mm): 150 - Constant table height - Pneumatic sanding belt oscillation - Pneumatic abrasive belt clamping - Special HBS sanding shoe: for conforming grinding with thickness differences of up to 4 mm or crooked workpieces - Selector switch adaptation grinding / calibration - Motorized workpiece thickness adjustment with rapid traverse - Automatic workpiece thickness scanning - Machine length (mm): 1150 - Machine width (mm): 1020 - Machine weight (kg): 950 - CE compliant