HELMERDING er used machines

pressure: 110 t throat: 290 mm stroke: 20-124 mm no. of strokes: 60 / 90 Hub/min ram adjustment: 85 mm table surface area: ca. 920 x 590 mm ram surface: ca. 530 x 280 mm distance table to upper part of the press: ca. 450 mm hole in the table: ca. 180 x 300 mm mm table height: ca. 750 mm tool hole in ram: Ø 50 mm Number of working hours: 8214 h distance table to upper part of the press: mm weight of the machine ca.: 5,5 t dimensions: ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new ones press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: HELMERDING hiw, Single-column eccentric press type ERL135B -Pressure capacity: 135 tons -Coupling: pneumatic -Drive: 11 kW -Stroke: adjustable 20 - 120 mm -Table size: 670 x 1050 mm -Table cutout: 200 x 325 mm -Projection: 360 mm -Punch holder: Ø 50 mm -Insertion height 445 mm -Dimensions: 2530/1200/H2410 mm -Weight: 8008 kg

Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: HELMERDING hiw, Single-column eccentric press type ERVL65B -Pressure capacity: 65 tons -Coupling: pneumatic -Drive: 5.0/6.0 kW 1440/2890 rpm -Stroke: adjustable 14 - 90 mm -Table size: 590 x 740 mm -Table cutout: 140 x 240 mm -Protrusion: 310 mm -Punch holder: Ø 40 mm -Insertion height 340 mm -Dimensions: 2070/1050/H2140 mm -Weight: 4430 kg

pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram adjustment: 85 kW table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: Ø280 mm table height: 830 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2560 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t throat: 350 mm stroke: 20-120 mm no. of strokes: 40-60 Hub/min ram - range of adjustment: 85 mm table surface area: 1050x690 mm ram surface: 650x320 mm hole in the table: 325x200 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8,6 t dimensions of the machine ca.: 2500x2500x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t throat: 350 mm stroke: 20-120 mm no. of strokes: 50 / 75 Hub/min ram - range of adjustment: 85 mm table surface area: 1150x670 mm ram surface: 800x380 mm hole in the table: 330x200 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram - range of adjustment: 85 mm table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: 300x180 mm table height: 830 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

a used stamping machine Helmerding, type KDH/2100/2, BauJ. 2008 Pressure 315 to., partially overhauled, Siemens S7 controller, hydraulic. Overload protection, complete helmerding conveyor system, distance between the stands 2100 mm, installation height 500 mm, stroke 40-200mm, 20-100 strokes, table surface 2000 x 1200 mm

A complete punching line with Helmerding eccentric press is available. 1) Eccentric press Helmerding KDH 100, year of manufacture: 1997, power: 11kW, pressing force 30° before and after: 100t, stroke adjustment: 8mm-110mm, ram adjustment: 80mm, stroke rate: 40-140 strokes/min, length: 2100mm, width: 1500mm, weight: approx. 12000kg. 2) Kohler 1000.1 reel, year of manufacture: 1983, power: 1kW, load capacity: 1000kg, length: 1500mm, width: 1100mm. 3) Straightener Kötje RM-7-300-60, year of manufacture: 1998, power: 3kW, max. strip width: 300mm, straightening roller diameter: 60mm, number of straightening rollers: 7, length: 1400mm, width: 1200mm. 4) Roller feed Kötje EWV 80-50-S, year of manufacture: 1998, power: 4kW, length: 750mm, width: 700mm. Documentation available. On-site inspection is possible.

Single-column eccentric press HELMERDING type TPEP 12 BMasch. No. 831-101 Comm. No. 76228 Year of construction 1976Compressive force 12 ton. Projection 155 mmTable surface 400 x 320 mmTable opening 125 mmPlunger area 125 x 100 mmLifting adjustment 6-60 mmRam adjustment range 40 mmClamping pin hole 25 mm with clamping pieceInstallation height max. 250 mmStroke rate 180 strokes/min. Drive power 1.1kW- Electric foot switch and 2-hand operation- Setup, single stroke 2-hand, single stroke foot and continuous running foot, automatic

Drill, column drill, column drill, pillar drill, box column drill, tapping machine, tapping machine -Manufacturer: HIW Helmerding, drill press -Motor: 1.0/1.6kw -Speeds: 95 - 1050 rpm, 8 levels -Feed: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Projection: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

pressure: 315 t stroke: 40-200 mm no. of strokes: 20-100 Hub/min ram - range of adjustment: 120 mm ram surface: 2000x1100 mm table surface area: 2000x1200 mm hole in the table: 1700x250 mm : 500 mm column travel -side: 820x650 mm total power requirement: 45 kW weight of the machine ca.: 44 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 315 t stroke: 40-200 mm no. of strokes: 20-100 Hub/min ram - range of adjustment: 120 mm ram surface: 2000x1100 mm table surface area: 2000x1200 mm hole in the table: 1700x250 mm : 500 mm column travel -side: 820x650 mm total power requirement: 45 kW weight of the machine ca.: 44 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 t throat: 240 mm stroke: 12-84 mm no. of strokes: 135 Hub/min ram - range of adjustment: 70 mm table surface area: 600x450 mm ram surface: 360x180 mm hole in the table: 220x130 mm table height: 630 mm tool hole in ram: Ø35 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: BxTxH 1500x2000x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An old eccentric press Elmerding with defective foot switch is available. Press capacity 30°: 25t, stroke adjustment range: 12mm-80mm, ram adjustment: 60mm, stroke rate: 120rpm, table adjustment: 150mm, safety distance: 144mm, weight: approx. 1450kg. Only 2-hand operation is possible. Documentation available. An on-site inspection is possible.

dimensions: length 643 mm width 410 mm weight 14,5 kg material 1.4301 / AISI 304 suitable for fruit and vegetable juices scope of delivery: two pipe-screens, flap valves and tees piped, with cans 0,25 mm, 2x connection parts with slotted nut DN25 ; new machine - top condition

Peri Ergo post 3.00m The hot-dip galvanized ceiling prop meets load classes B and D according to DIN EN 1065. The maximum load capacity is up to 50 kN. Thanks to hot-dip galvanizing, the Peri Ergo prop has a long service life. Price per unit : EUR 25,00 Price stacking rack: EUR 95.00 Peri Ergo Prop 3,00m PERI PEP Ergo Props fully comply with Load Class B, D and E of EN 1065. The maximum load-bearing capacity is 50 kN. The complete galvanisation of all surfaces guarantees a long service life. Price per piece : EUR 25,00 Price Stackingpalet: EUR 95,00

Used Used Case Erector Mondo&Scaglione 2015: Year: 2015 Condition: Good Used Case Erector Mondo&Scaglione: Model: AUT MOD 300/N Year: 2015 Speed: 600 CPH Tape closure Dimensions of machinery: 2700 mm x 1400 mm x 2400 mm (h) Safety protections Code: G 96 More details: https://bottlingscout.com

Used Used Case Erector APE form 1200 hma: Year: 2004 Condition: Good Used Case Erector APE form 1200 hma: Year: 2004 Speed: 900 CPH Model: FORM 1200 HMA Hot melt gluer ? NORDSON ? Year 2010 Safety Protections Code: G 90 More details: https://bottlingscout.com

Used Used case Erector APE FORM 1200 HMA: Year: 2006 Condition: Good Used case Erector APE FORM 1200 HMA: Year: 2006 Speed: 900 CPH Model: FORM 1200 HMA Hot melt gluer ? NORDSON ? Year 2019 Safety Protections Code: G 91 More details: https://bottlingscout.com

Used Used Case Erector APE Form 1200 hm: Year: 1989 Condition: Good Used Case Erector APE Form 1200 hm: Model: form 1200 hm Year: 1989 Speed: 900 cph, Closure Glue Gluer Nordson problue 4 anno 2008 Dimensions: 2m x 1,80m, altezza 2m Safety protections Code: G 92 More details: https://bottlingscout.com

Used Used Case Erector Ape Form 1200: Year: 1998 Condition: Good Used Case Erector Ape Form 1200 Year: 1998 Model: form 1200 Speed: 900 c/h Gluer mesa Included conveyor Safety protections Code: G 19 More details: https://bottlingscout.com

Used Used Case Erector Siat F44v: Year: 2015 Condition: Good Used Case Erector Siat F44 Year: 2015 Speed: 8 c/minute Model: f44 Closing box with adhesive taps. Safety protections. Code: G 40 More details: https://bottlingscout.com

Used Used Case Erector TMG Formec: Year: 2002 Condition: Good Used Case Erector TMG Formec Year: 2002 Model: formec Speed: 5.000 bph Gluer nordson Safety protections Code: G 63 More details: https://bottlingscout.com

Used Used Case Erector Mondo&Scaglione 378/C: Year: 2005 Condition: Good Used Case Erector Mondo&Scaglione 378/C Year: 2005 Speed: 1.500 boxes/h Model: 378/c Formation of the horizontal carton Gluer nordson Safety protections Code: G 64 More details: https://bottlingscout.com