GROB bz used machines

x-travel:800 mm y-travel:690 mm z-travel:630 mm total power requirement:76 kW weight of the machine ca.:25,5 t b-axis:630 Rundeinheit control:Siemens 840 D workpiece weight:max . 1.100 kg spindle turning speed range:15000 U/min Boring power:30 mm plate size:630 x 630 mm Dimension:6000 x 2900 x 2400 mm spindle taper::HSK 63 Documents:vorhanden

BRAND: GROB YEAR: 2011 MODEL: G350 APPLICATION TYPE: MILLING LOCATION: SLOVAKIA MACHINE TYPE: MACHINING CENTERS (UNIVERSAL) AVAILABILITY: 01 08 23 Technical Information CONTROL UNIT BRAND: SIEMENS MODEL: SINUMERIK 840D MAIN DRIVE SPINDLE SPEED RANGE: 18000 1/MIN SPINDLE MOTOR POWER: 29/39 KW MOVEMENT X-AXIS MOVEMENT: 600 MM Y-AXIS MOVEMENT: 770 MM Z-AXIS MOVEMENT: 805 MM TABLE OUTER LENGTH: 400 MM OUTER WIDTH: 400 MM TOOLS SLOTS IN STORAGE: 34 TYPE OF TOOL HOLDER: HSK-A 63 - The machine on offer is a SINGLE Piece of the generation 0 in hydraulic-free execution. - Electromechanical pallet clamping system. - Workpiece carrier pallets with an electromechanical pallet clamping system. - Adjustment device for electromechanical clamping on pallet. - Electromechanical motor spindle. - Second-hand machine, without torque motor in the A axis. - The A-a ...

Key data: 600 mm, 770 mm, 805 mm

Siemens Sinumerik 840D sl 2 pallets, 2-fold pallet changer Pallet size: 400 x 400 mm Travel: X: 600 mm Y: 770 mm Z: 805 mm Swivel table A-axis Rotary table with pallet clamping system coarse (B-axis, PW) Milling spindle HSK-A63 Milling spindle drive power: 32/25Kw Max. torque: 206 Nm Max. spindle speed: 16,000 rpm Grob Spindle Diagnosis GSD Tool magazine with 90 tool positions Tool cleaning device Tool length measurement Renishaw Workpiece Measurement, RMP60 Machine condition light Pallet set-up station, can be rotated by hand Set-up door, additional control panel Preparation of hydraulic workpiece clamping system Swivel Axis Calibration GSC Energy Efficiency Package EED Hand-operated handset HAT 8 Sinumerik MDynamics technology package – milling Coolant Package Premium - Scraper belt chip conveyor, discharge height 1,100 mm - Filter system -Tank - High-pr ...

Inv. Num. : 7723 Type: ZRM9 Producer: Ernst Grob Generated: Parameters: The machine is used to produce involute grooves by extrusion. Accessories: Several grave goods Universal Gear wheels

x-travel:800 mm y-travel:950 mm z-travel:1020 mm control:Sinumerik 840D sl MDynamics Operate turning speeds:10.000 1/min Spindle power:26/20 kW max. torque on the spindle:340/262 Nm tool taper:HSK-A 100 tool change unit:120 (2x60) Pos. Pallet changer 2x:630 x 630 mm table load capacity:800 kg weight of the machine ca.:20 t dimensions of the machine ca.:3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don?t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle  ...

x-travel:800 mm y-travel:950 mm z-travel:1020 mm weight of the machine ca.:17 t dimensions of the machine ca.:6 x 3 x 3,2 m Diameter of the table:770 mm max. table load:800 kg tool taper:HSK-A63 max. tool length:465 mm no. of tools in magazin:60 spindle turning speed range:12.000 U/min feed power:8 kN kp power capacity:25/35 kW 5 axis G550-1024 HSK A-63 Grob (Bezeichnung G550-1024) 1 spindle

x-travel:800 mm y-travel:950 mm z-travel:1020 mm control:HEIDENHAIN iTNC 530 table load capacity:800 kg tool taper:HSK 63 turning speeds:16.000 1/min spindle:35 / 25 kW table-size:770 mm max. torque on the spindle:160 / 223 Nm tool change unit:120 (2x60) Pos. weight of the machine ca.:20 t dimensions of the machine ca.:3,3 x 6,15 x 3,2 m 5-axis simultaneously machining center with controlled swivel-rotary table (A/B-axis), milling head horizontal, internal coolant device (10-80bar), oilmist-suction, electromech. tool-length measuring device GROB, chipconveyor, 3D touch probe, KINEMATICOPT, BLUM laser, el. handwheel, hour meter: approx. 82.000 h "machine on", approx. 48.800 h "spindle on"

Various round-stroke tables with clamping elements, for conversions or adaptations, etc.

Feed sled unit hydraulic, various spindles, for conversions or adaptations

rolling capacity max.: t workpiece diameter: 470 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rolling capacity max.: t workpiece diameter: 470 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rolling capacity max.: t workpiece diameter: 470 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight of the machine ca.:11,2 t one spindle

Key data: 600 mm, 750 mm, 805 mm

Full working, perfect condition machine for sale! * 5-axis simultaneous * HEIDENHAIN iTNC 530 controller * spindle HSK-A 63, 16,000 min-1, 159/206 Nm, 25/32 kW - Spindle -> 4200 working hours (almost new!) - Axes -> 16800 working hours * tool magazine HSK-A 63 with 34 tools stations * additional side tool magazine TM99 with 99 tools stations * remote controller HEIDENHAIN * KinematicOpt * DCM Collision (HEIDENHAIN) * job InfraRed touchprobe with HEIDENHAIN software * high pressure through the spindle cooling system (38 bar) Ibjbexpf Hfspw Rc Exjf * pressure blow through the spindle * chamber mist extractor * Tool cleaning system * Chip (Swarf) Convoyeur * oil skimmer for coolant tank * coolant gun * coolant washdown for chamber * remote machine diagnostic (via network) * Voltage 400 V, 50 Hz, TN-S Machine is located in production facility in Mielec 39-300, Pola ...

Two Groba ascending conveyors are available. 1) Length: 5700mm, height: 2900mm, outer corrugated edge width: 540mm, inner corrugated edge width: 480mm, cleat height: 35mm. 2) Height: 3500mm, length: 4600mm, width: 500mm, cleat height: 35mm.

x-travel:600 mm y-travel:770 mm z-travel:675 mm total power requirement:47 kW weight of the machine ca.:13 t Tool bore:HSK-A63 numbers of tools in magazin:40 including additional tool magazine ZM 182 1 spindle , 5 axes

x-travel:630 mm y-travel:630 mm z-travel:500 mm number of spindle speeds:0 - 15000 spindle motor:32 kW size of pallet:500 x 500 mm b-axis:36000 x 0,001 ° no. of workpieces in the magazine:61 Stück tool taper:HSK 63 weight of the machine ca.:15 t Single-Spindle Mechanical processing cylinder head VR6

spindle speed::max. 12000 tool taper:HSK 80 . b-axis:360 x 0,001 ° worktool support (A-axis):+40 / -95 ° weight of the machine ca.:25 500 Kgs. x-travel:800 mm y-travel:700 mm z-travel:630 mm dimensions of the machine ca.:6200 x 3000 x 3200 mm pallet size::500 x 500 mm no. of tools in the magazine:61 Nos. Weight approx.:23,5 t Horizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition. Single spindle

We can supply following Hydraulic Pump. HYDRAULIC PUMPS - 3Nos MAKE: KAWASAKI HEAVY Ind. JAPAN TYPE: BZ732S215LH REGISTERED TYPE: R3041L-2SOL No. :11610425/B 466269/B 466268

System: Used decanter / centrifuge Manufacturer: Alfa LAval Model: full coat screw centrifuge Type: AVNX 937 (or NX 4550) . No.: 501.8151.1994 B.: 1994 Drum inner diameter: 450 mm L/D = 5/1: Material: Stainless steel

HYDRAULIC PUMPS - 3Nos MAKE: KAWASAKI HEAVY Ind. JAPAN TYPE: BZ732S215LH REGISTERED TYPE: R3041L-2SOL

HYDRAULIC PUMPS - 3Nos MAKE: KAWASAKI HEAVY Ind. JAPAN TYPE: BZ732S215LH REGISTERED TYPE: R3041L-2SOL

HYDRAULIC PUMPS - 3Nos MAKE: KAWASAKI HEAVY Ind. JAPAN TYPE: BZ732S215LH REGISTERED TYPE: R3041L-2SOL

Dear customers currently we offer you a used tape saw of the brand F. Zimmermann. Here are the technical data of the machine: Work table: 750 x 750 mm Cutting width: 775 mm Super cutting height: 640 mm Table swivel: 45/10° Roll diameter: 800 mm Power: 4 kW Speed: 1,500 rpm - with engine brake Cutting speed: 1,400 rpm Door safety switch Machine is CE compliant! Dimensions: 1,370 x 850 x 2,950 mm Weight: approx. 850 Kg Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not hesitate to contact us.

Dear customers currently we offer you a used tape saw of the brand F. Zimmermann. Here are the technical data of the machine: Work table: 1,150 x 750 mm Cutting width: 775 mm Super cutting height: 640 mm Table swivel: 45/10° Roll diameter: 800 mm Power: 4 kW Speed: 1,500 rpm - with engine brake - motorized table and guide adjustment -Digital Cutting speed: 1,400 rpm Dimensions: 1,370 x 850 x 2,950 mm Weight: approx. 850 Kg Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not hesitate to contact us.