GREIF dv used machines

Double grinding buck Greif Grinding wheel diameter 300mm Speed 1,500rpm Power 1.5KW Special price!

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder, tool grinding machine -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: Ø 300 mm -Operating voltage: 380 volts -Dimensions: 1080/480/H1240 mm -Weight: 252 kg

Staehle grinding machine Manufacturer Greif Staehle auflage adjustable at angle Cooling agent tub Almost unused condition from a training workshop. Special price

turning speeds: 3.000 U/min grinding wheel diameter: 150 mm table-size: 380 x 220 mm T-slots: 1x 0: 3~220 / 380 V total power requirement: 0,37 kW weight of the machine ca.: ca. 150 kg dimensions of the machine ca.: 0,7 x 0,6 x 1,25 m Turning Tool Grinding Machine GREIF - DHL K-0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Manufacturer: Greif, double grinding wheel type D 20/4 -Grinding discs: max. Ø 250 mm -Motor power: 0.37 kW -Speed: 1400 rpm -Operating voltage: 220/380 volts -Dimensions: 500/310/H315 mm -Weight: 40 kg

Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!

max. grinding diameter:160 mm stations:2 sanding width:30 mm total power requirement:0,37 kW weight of the machine ca.:100 kg dimensions of the machine ca.:520 x 520 x 1160 mm

max. grinding diameter:160 mm stations:2 sanding width:30 mm total power requirement:0,37 kW weight of the machine ca.:100 kg dimensions of the machine ca.:520 x 520 x 1160 mm

rotary table dia.: . mm max. dia. of grinding wheel: 300 mm with manual ongoing: . 0 manually feed: . 0 1,5 KW The technical Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: . mm max. dia. of grinding wheel: 260 mm with manual ongoing: . 0 manually feed: . 0 0,73 KW The technical Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel Ø: 300 mm Grinding wheel width: 50 mm Grinding wheel speed: 1400 rpm Grinding wheel drive: 380 V, 1.5 kW Space requirement: 1050 x 580 x 1200 mm Weight approx.: 140 kg

gebr. Double Bench Grinder Fabr. Griffin Diameter 200 mm Revolutions 3,000 rpm.

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motorized winch, tackle, pulling winch, block and tackle, cable winch -For passenger transport and loads: up to 500 kg -E-motor: Greifzug type C80/9-2FL 1.8 kW -Brake: Greifzug FDB 13 CHR 16 Nm -Rope speed: 18 m/min -Rope: Ø 8 mm -Rope length: 143 m -with: Rope length measuring device -Dimensions: 700/460/H600 mm -Weight: 78 kg

Double bench grinder, bench grinder, column grinder, column grinder, drill bench grinder -grinding wheel: max. Ø 180 x 60 mm -Speed: 2980 rpm -Motor power: approx. 0.9 kW -Operating voltage: 380 volts -Dimensions: 520/400/H1420 mm -Weight: 140 kg

double grinder, double grinder, column grinder, column grinder, drill grinder -Double grinder with: water cooling -Grinding disc: max. Ø 450 x 63 mm -Speed: 950 rpm -Engine power: 3.3 kW -Operating voltage: 380 volts -Quantity: 2 pieces available -Price: per piece -Dimensions: 370/370/H1090 mm -Weight: 404 kg

Multipurpose hoist, grab hoist, hoist, assembly hoist, rope hoist, universal rope hoist -Manufacturer: Greifzug -Cable with: 3000 kg load capacity -Number: 2x available -Price: per piece -Dimensions: 690/140/H370 mm -Weight: 28 kg

Multipurpose hoist, grab hoist, hoist, assembly hoist, rope hoist, universal rope hoist -Manufacturer: Greifzug -Cable with: 3000 kg load capacity -Weight: 29 kg

Motor for gripping hoist/hoist, hoist motor, multi-purpose hoist, assembly hoist, rope hoist, universal rope hoist -Manufacturer: Greifzug -Type: T90L/10-4F -Power: 2.2 kW -Speed: 1410 rpm -Toothed shaft: Ø 28 mm -Module: - mm -with: brake -Dimensions: 505/175/H280 mm -Weight: 31 kg

electric motor, three-phase motor -Power: 0.18 kW -Speed: 2800 rpm -Shaft: Ø 14 mm -Design: 14 -Protection class: IP 54 -Quantity: 1 available -Dimensions: 245/163/H155 mm -Weight: 5 kg

Gear motor, electric motor, three-phase motor -Fan cover: defective -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 5x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg

Gear motor, electric motor, three-phase motor -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg

beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp, support clamp, crane clamp -Manufacturer: Greifzug, Corso beam clamp type LT-3B -Flange width: 80 - 320 mm -Load capacity: 3 t -Dimensions: 380/115/H375 mm -Weight: 11 kg

Electric motor, three-phase motor -Manufacturer: ABM Greiffenberger, electric motor type 3 DF 1/132 Sa-2 -Power: 5.5 kW -Speed: 2890 rpm -Shaft: Ø 38 x 65 mm -Design: B5 -Protection class: IP 54/55 -Number: 2x available -Price: per piece -Dimensions: 430/300/H250 mm -Weight: 36 kg

Electric motor, three-phase motor -Manufacturer: ABM Greiffenberger, electric motor type 3 DF 1/132 Sb-2 -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection class: IP 54/55 -Dimensions: 450/300/H250 mm -Weight: 43 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist -Manufacturer: Grab hoist, multi-purpose hoist type TU 32 with steel cable -Load capacity: 3200 kg -Steel cable: Ø 16.3 mm / length 30 m -Number: 2x cable pull available -Price: per piece -Dimensions: 680/170/H340 mm -Total weight: 65 kg/set