GERICKE gms used machines

Volume : 1200 ltr. Material : areas in contact with the product in stainless steel; --> mixer mounted on base frame.

* General * SKU326S596 * LocationBarneveld * MakeGericke * TypeGMS 300 * Main Features * MaterialStainless steel * Volume240 Ltr. * Motor4 KW * Specified Features - Powder turbo mixer * Paddle mixercheck * Powder turbo mixers * Powder turbo mixercheck * Capacity300 ltr. * Useful capacity240 ltr. * Trough sizes840x870x470mm * Inlet305x310mm * Top connectionsdia. 35mm (1x) * Inspection hatch400x240mm * Outlet300x100mm * Glands air purgedcheck * Motor4 kW 380 Volt * With lump breakercheck * Motor2,2 kW 230-240/400-415 Volt * Speed lumpbreaker2772 rpm * MaterialStainless steel * Information * No.1005 * Year of construction1991 * Floorspace1,8x1,2 M * Total height1,6 M * Weight900 KgPowder turbo mixersCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicSpicesOther chemicalStarch ...

Type: VGL 5000. Double-current mixer in standard steel version with 5,000 l. useful content, cylindrical mixing tank and conical bottom, with vertical middle screw, distribution arm and power line controller, rectangular connector for pocket filter, manhole, lower Screw bearing with air flushing, pneumatic flat slider at the outlet.

Dosage

Dosing scale with precision spiral screw feeder in stainless steel version, with pre-container and weighing frame in frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with large loosening spiral in the trough, drive 0.47 kW via timing belt and Reduction gearbox, discharge pipe diameter: 50 mm.

--> powder scale.

Micro Feeder Gericke GLD 86 Agitator 0.03 kw - 16.5rpm, auger 0.08kw -210rpm, Control

Gericke CSM centrifugat rotary sifter Stainless steel Year 1998 CM 215009

* General * SKU292N352 * LocationBarneveld * MakeGericke ag * Main Features * MaterialStainless steel * Specified Features - Silo * MaterialStainless steel * Silocheck * Closedcheck * Diameter1000mm * Cylindrical height1500mm * Conical height800mm * Flat topcheck * Inlettangential, (1x) 80mm * Top connectionssystemfilter 4206 0306/10-2 * OutletGericke RA 550, dia.200mm * Information * Mounted on framecheck * Floorspace1,3x1,3 M * Total height3,2 M * Weight500 KGSilosGerickeTanks > SilosBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU316S537 * LocationBarneveld * MakeGericke * Typeingredënten dosering * Main Features * MaterialStainless steel * Motor0.55 KW * Inlet diameter250 mm * Specified Features - Metering screw * MaterialStainless steel 1.4571 (316Ti) * Metering screws * Metering screwcheck * Screw diameter85 * Pitch85 * Shaft diameter21 * Screw length600mm * With hoppercheck * InletDia: 250mm(2x), Dia: 100mm, 150x150mm * OutletDia 145 and 100mm (3x) * With motor0,55kW, 400Volt, 1400rpm * Screw speed10,5-104 rpm * Information * Year of construction2010 * Mounted on framecheck * Floorspace2,3x2,1m * Total height3,1m * CEcheck * Weight1000kg * Extra Specificationsfitted with Gericke DBW-300 metering belt specifications: length: 1800mm width: 300mm this dosing unit includes 3 dosing screws: #1 Screw Dia: 85mm pitch: 85mm Length:600 with ribbon mixer:± 165mmx75, Length :250mm #2 screw Dia: 40mm pit ...

* General * SKU276P412 * MakeGericke (CH) * TypePTA 20 * No.20.3032 * Year of construction2004 * LocationBarneveld * Pressure * Working pressure3.9 Bar * Main Features * MaterialStainless steel * Volume20 Ltr. * Pressure3.9 Bar * Specified Features - Pneumatic conveying system * MaterialStainless steel 1.4571 (316Ti) * Pneumatic air conveying systems * Capacity20 Ltr * Dished topcheck * Dished bottomcheck * Top connectionsCone valve DN200 with actuator * Outletdia.50mm (butterfly valve with actuator) * Information * Mounted on consolesmobile * With switchgearcheck * Floorspace1,2x1,0 M * Total height1,3 M * Weight170 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome t ...

* General * SKU276P418 * MakeGericke (CH) * Type50 * No.50.3012 * Year of construction2004 * LocationBarneveld * Pressure * Working pressure3.9 Bar * Main Features * MaterialStainless steel * Volume50 Ltr. * Pressure3.9 Bar * Specified Features - Pneumatic conveying system * MaterialStainless steel 1.4571 (316Ti) * Pneumatic air conveying systems * Capacity50 Ltr * Dished topcheck * Dished bottomcheck * Top connectionshopper (D500xd180xh450mm) * Outletdia.50mm, with butterfly valve and actuator * Max. temperature80 degr.C. * Information * Mounted on consolesmobile * With switchgearcheck * Floorspace1,9x1,0 M * Total height1,5 M * Weight250 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwi ...

* General * SKU276P415 * MakeGericke (CH) * Type50 * No.50.2154 * Year of construction2002 * LocationBarneveld * Pressure * Working pressure3.9 Bar * Main Features * MaterialStainless steel * Volume50 Ltr. * Pressure3.9 Bar * Specified Features - Pneumatic conveying system * MaterialStainless steel 1.4541 (321) * Pneumatic air conveying systems * Capacity50 Ltr * Dished topcheck * Dished bottomcheck * Top connectionshopper (D500xd180xh700mm), with butterfly valve and actuator * Outletdia.50mm, with butterfly valve and actuator * Information * Mounted on consolesmobile * Floorspace1,1x0,8 M * Total height1,8 M * Weight220 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welco ...

* General * SKU276P416 * MakeGericke (CH) * Type50 * No.2003 * Year of construction1992 * LocationBarneveld * Pressure * Working pressure3.9 Bar * Main Features * MaterialStainless steel * Volume50 Ltr. * Pressure3.9 Bar * Specified Features - Pneumatic conveying system * MaterialStainless steel 1.4571 (316Ti) * Pneumatic air conveying systems * Capacity50 Ltr * Dished topcheck * Dished bottomcheck * Top connectionshopper (D600xd180xh700mm) with butterfly valve with actuator * Outletdia.50mm, (butterfly halve with actuator) * Max. temperature80 degr.C * Information * Mounted on consolesmobile * Floorspace1,2x0,8 M * Total height2,0 M * Weight220 KGPneumatic conveying systemsGerickeConveying systems > Pneumatic conveying systemsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination w ...

* General * SKU292N353 * MakeGericke ag * LocationBarneveld * Main Features * MaterialStainless steel * Specified Features - Silo * Silocheck * Closedcheck * Diameter1000mm * Cylindrical height1300mm * Conical height800mm * Flat topcheck * Inlettangential (1x)80mm,( 1x)120mm * Top connectionsts systemfilter 1194 0997/2 * OutletGericke RA 550, dia 200mm * MaterialStainless steel * Information * Floorspace1,4x1,4 M * Total height3,2 M * Weight500 KGSilosGerickeTanks > SilosBrand > Gericke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU223Y097 * MakeGericke / Azo * Magento base * g_extra_specificationsWith hopper and control cabinet (frequency inverter inside). * Main Features * MaterialStainless steel * Motor0.21 KW * Inlet diameter160 mm * Specified Features - Metering screw * MaterialStainless steel 1.4301 (304) * Metering screws * Metering screwcheck * Screw diameter2x 25 mm * Screw length350 mm * With hoppercheck * Hopper sizes800 x 800 x 500 mm * Inlet160 x 160 mm * Outletø 90 mm * With motor0,12 kW (400 V, 1300 rpm) * Screw speed53 rpm * With breaking/mixing shaftcheck * Motor0,09 kW (400 V 1300/17 rpm) * Information * Mounted on framecheck * LocationBarneveld * With switchgearcheck (as is) * Floorspace0,80 x 0,80 m * Total height1,25 m * Weight120 kg * CEcheckMetering screwsGerickeDosing units > Metering screwsBrand > Gericke What you can expect from Foeth: -- Machine is in working condition --  ...

Kontrol screening machine GERICKE Screen basket approx. ø 190 x 580 mm, belt drive SPZ125-2 TL : SPZ 190-2 TL Rotor n=930 rpm, outlet ø 245 mm and 145 mm Mesh size nylon screen: 3 mm Refurbished and ready to use

HORIZON GMS 7 -Automatic book spine taping machine Year 1996 -Length of Spine: Manual Feed (80 mm -3.1″ to No Max. Limit) or Automatic Feed (180 mm- 7.1″ to 320 mm -12.5″) -Book Width: Manual Feed (60 mm- 2.4″ to No Max. Limit) or Automatic Feed (128 mm- 5″ to 273 mm- 10.7″) -Taping Thickness: Manual Feed (2 mm- 0.1″ to 30 mm -1.2″) or Automatic Feed (5 mm- 0.2″ to 15 mm- 0.6″) -Taping Speed: 4,000 books/hr. (180 mm/7.1″ long) -Tape Type: Water-moistened adhesive tape -Voltage/Frequency: 100V 50/60Hz, 115-120V 60Hz, 230V 50Hz -Dimensions (W x D x H): 72.1″ x 21.7″ x 36.7″ -Machine Weight: 140 kg (242 lb) -Available immediately in our stock

Material: mild steel Reel in stainless steel;

Electrical Supply: 400V 50Hz 3N Main Material Stainless Steel, Acid Resistant Description: A line consisting of: Freezer tunnel TVI CBF 1000. SCHIESSL tunnel feed unit with Bitzer compressor. TVI GMS 500 slicer.

East Tyrolean combi mill Waldner GMSM 40 Grindstones 400 mm Output approx.: 25-30 kg fine flour/hour for the production of wholemeal flour and wholemeal meal only DGUV V3 tested by us Connection 400V, 2.2 kW, 16A-CEE plug Used machine

East Tyrolean combi mill Waldner GMSM 40 Grindstones 400 mm Output approx.: 25-30 kg fine flour/hour for the production of wholemeal flour and wholemeal meal only DGUV V3 tested by us Connection 400V, 2.2 kW, 16A-CEE plug Used machine

Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Machine complete, in good working conditions.

Business card 55 mm module Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz

Business card modul Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz Machine checked and cleaned