Crank Presses WEINGARTEN 1600 to

Technical data Weingarten Mechanics Press 1600 to

Nominal press force from 20 mm before UT 16000 kN
Endurance stroke rate at idle infinitely variable 10 - 22 strokes/min
Setup stroke number 5 - 10 stroke/min
Plunger stroke 600 mm
Maximum tool installation height 1200 mm
Stroke at the bottom, adjustment at the top
Minimum tool installation height 900 mm

Plunger adjustability 300 mm

Standard tool installation height
(closed tool if power setup springs are present) 1150 mm

Table top dimensions, length x width 3600 mm x 23
Plunger plates dimensions, length x width 3600 mm x 23

Passage between uprights in length 3650 mm
Passage between the uprights in the width of 2300 mm

Transfer height above press table 750 mm

Quick Tension Plunger Plate:
Swivel voltage, stationary 4 pcs. on each side
Tool clamping flange thickness 70-0.2mm
Clamping force per element max. 80 kN
Swivel angle 15°

Main data of the PCB feeding setup:

PCB thickness 0.5 - 6 mm
Circuit board dimensions, max. L x W 600 mm x 1450 mm
Stacking height, max. 400 mm

1.2 Technical data

Throw pillows:
Number of drawing cushions
at table 4
Force of the cushions in the table at 14.5 bar operating pressure:
Cushions 1 to 2 each 1200 kN
Cushions 3 to 4 each 800 kN
Cushion area, length x width (11x5 quills) 1560 mm
Center distance of the 4 pressure scales per cushion 750 mm
Cushion lift in the table 50 - 250 mm
Number of drawing cushions
in pestle4
Force of the cushions in the plunger at 14.5 bar operating pressure:
Cushions 1 to 4 each 250 kN
Cushion area, length x width (11x5 quills) 1560 mm
Center distance of the 4 pressure scales per cushion 750 mm
Lifting of the cushions in the plunger max. 150 mm

Transfer system:

Gripper feed infinitely adjustable 0 - 900 mm
Gripper rail inner width, min. closed 800 mm

Gripper rail inner width, max. open 2000 mm
Closing distance per rail 180 mm
Lifting stroke 80 mm
Clearance for the initiator plug 50 mm

seller offer No. resale 169923829