Powder Coating Equipment VOGAMAKINA Manual powder coating booth

1. VFK CARTRIDGE FILTERED POWDER COATING BOOTH (1-SIDED)
Cartridge type powder coating booths are cost-effective solutions for companies that generally use single color powder coating or do not change the paint color much.
WORKING PRINCIPLE
The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel.
POWDER RECYCLING
As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse.

It is designed with opening from the front side for manual powder coating applications. There is an electrical panel on the system and electrical installation has been made up to the motors.

1.1. TECHNICAL DETAILS
POWDER BOOTH
EXTERNAL DIMENSIONS
Width : 1.100 mm
Depth : 1.250 mm
Height : 2.400 mm
Booth structure : Externally powder coated 1mm and 1,5mm CRS sheet metal
Illumination : 1 Pcs of 2x18W durable led, closed type (non-Exproof)
FILTER UNIT
Extraction fan : 4.500 m³/h 2,2KW 50Hz Radial V5861515 type, sheet metal body V5861515 and propeller (non-Exproof)
Filters : 2 Pcs Ø320x600 100% polyester filter
Filter surface area : 7,5 m²/each
Pull-reverse system : Pulse valve system
Manual, button controlled from control panel
Pulse valves : 2 Pcs ¾” 220V 10W
Required compressed air : 300 lt/min, 6 Bar - Dry air

Powder collection tank : Drawer type
Powder recovery system : n/a

1.1. CONTROL PANEL AND ELECTRICAL INSTALLATION
The electrical control panel is mounted on the cabin and the internal cabling has been made. The control panel consists of switchgear panel elements from SCHNEIDER ELECTRIC brand.
Electrical control panel, cabling and all connections to the motors are standard, non-ATEX certificated.

seller offer No. resale VFK-2