presses: other used for sale (235)

BARCODE PRINTER / LABEL PRINTER CAB A4 + Equipment / Additional information: Printer method: thermal transfer / thermal direct Resolution: 203 dpi, 300 dpi or 600 dpi Print speed: 200 mm / sec (203 dpi), 152 mm / sec (300 dpi) Maximum print width: 116 mm Interfaces: USB 2.0, RS232, Ethernet 10/100 Base T, 2x USB master interface, slot for CompactFlash memory card

MECHANICAL PAPER SCALE WITH HANDPROBE PUNCH M. No.: 618371 Equipment / Additional information: Mechanical Paper Scale Schiltknecht Switzerland F. No: 8351

Inv. Num. : 8752 Type: G3521 Producer: SOMA Created: 1995 Parameters: The conversion to a printing press took place around 1995.

Inv. Num. : 8433 Type: F190 CR Producer: Stratasys Generated: Parameters: Scope of delivery: PC with software Filament dryer Washing machine to remove the support material Filament vacuum cleaner Printheads and pads Number of filament spools

Inv. Num. : 8326 Type: STAR G2 Producer: SPS VITESSA Created: 2003 Parameters: Maximum format size: 102 x 72 mm Equipment: ULTRATERM UV/HAC drying tunnel

Inv. Num. : 7474 Type: TPX 100 Producer: Teca-Print Created: 2006 Parameters: Vertical stroke: 100 mm Capacity: 1800 cycl./h Machine dimensions: 380 x 762 x 560 mm Weight: 30 kg Components of the offer: Base MS250 Cross Table KT30 Swab Feed

Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm

Die-cutting Slitting | Rewinding Web Width 330mm Max Speed 305 mpm May vary with application Max Unwind Diameter 711 mm Max Single Spindle Rewind Diameter 457 mm Max Dual Spindle Rewind Diameter 406 mm The Station Anvil Size 381 mm The Repeat Range 161-381 mm

UV drying system, Totalisator operating hours 1484, The system was connected to a Heidelberg GTO 52 with LACO 52-Lackiersystem., No direct connection to the pre-machines/devices is required., It is a used UV lamp ADNOS 04204B4 (current designation ADS 53-160) installed.

Press Gierlich P6000 Year of manufacture 1976

LACO 52 Inline Coating System, Supply voltage: 220V, Weight: 84 kg, Coat volume: 3.5 liters, Connection voltage: 220V, mass: 84 kg, Lubrication volume: 3.5 liters

A flatbed screen printing machine ESC is available. Print dimensions X/Y: 1200mm/800mm, max. print format: DIN A0, machine dimensions X/Y/Z: approx. 1550mm/1750mm/1200mm, weight: approx. 550kg. An on-site inspection is possible.

A Summa roll cutter from a textile factory is available. Pinch rollers: 4, media width range: 170mm-1450mm, maximum cutting width: 1350mm, media thickness range: 0.05mm-0.25mm, maximum tool force: 600g, perforation force: 250g, axis speed: 1m/s, resolution: 0.025mm. Machine dimensions X/Y/Z: approx. 2050mm/700mm/1150mm, weight: approx. 100kg. The machine has minor damage to the housing. Documentation available. An on-site inspection is possible.

The Lemorau MEBR+ is a digital finishing machine built in a modular concept where it can be added modules according to customer needs. The MEBR+ runs in full rotary and semi-rotary mode. Semi-rotary for short runs and full rotary for high speed longer runs. The registration tolerance is maintained during acceleration, deceleration and production time due to the latest servo technology. The Lemorau MEBR+ is equipped with a servo-driven compensator system which provides superior web tension control when the machine is running in semi-rotary mode., Standard Features, - Maximum rotary speed 200 m/min (656 ft/min.) – Blank labels, - Maximum rotary speed 120 m/min (394 ft/min.) – Die cutting to register, - Maximum semi-rotary speed 40 m/min (131 ft/min.) dependent on plate size – Die cutting to register, - Web width 250, 330, 400 mm (10, 13, 16 in), - Electronic Counter (Labels/ Meters/  ...

An HP additive manufacturing system for PA12 nylon including accessories is available. Printing technology: Multi Jet Fusion, build volume X/Y/Z: 380mm/284mm/380mm, material: PA12 (Nylon 12), machine dimensions X/Y/Z: approx. 2250mm/1250mm/1450mm, weight: approx. 750kg, operating hours: approx. 16300h. Including HP powder processing station, 3x HP build units, 3x printheads, 2x heat lamps and 5x fusion lamps. Documentation available. An on-site inspection is possible.

A Kongsberg flatbed cutting and creasing plotter is available. Table dimensions X/Y: 1329mm/1834mm, working area X/Y: 1324mm/1624mm, max. speed: 50m/min, positioning accuracy: +/-0.2mm, repeatability: +/-0.05mm, material clearance: 50mm, max. tool force: 220kN, tool 1/2/3: drag knife/oscillating knife/creasing wheel, registration system: i-cut Vision Pro. Machine dimensions X/Y: approx. 2250mm/2000mm, weight: approx. 420kg, operating hours: approx. 250h. Documentation available. An on-site inspection is possible.

A repairable Océ/Canon large-format monochrome plotter requiring repair is available. Print resolution: 600dpi, max. print speed: 2.74m/min, max. print width: 914mm, max. paper size: A0, max. roll length: 152m, max. output length: approx. 15m, scan resolution: 400dpi. Machine dimensions X/Y/Z: approx. 1400mm/1050mm/1300mm, weight: approx. 200kg. The mechanical system is defective. Documentation available. An on-site inspection is possible.

A Systec/ESC 2-color flatbed screen printing system is available. Processes: unwind unit, printing unit 1, intermediate module, printing unit 2, rewind unit. Unwind unit: Systec, intermediate module: Systec, rewind unit: Systec, printing units 1/2: ESC. Max. print format: 300mm/450mm, vacuum table dimensions X/Y: 400mm/600mm, vacuum surface dimensions X/Y: 345mm/465mm, max. frame dimensions X/Y: 500mm/750mm, print material thickness range: 0mm-50mm, working height: 945mm, printing speed: 500mm/s, max. cycle rate: 800pcs/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, unwind roll diameter: 600mm, unwind roll spindle diameter: 3in, vacuum boxes: 3. Machine dimensions X/Y/Z: approx. 7900mm/1400mm/1950mm. Documentation available. An on-site inspection is possible.

A semi-automatic ATMA flat-bed screen printing machine is offered. Max. print size X/Y: 400mm/600mm, vacuum table dimensions X/Y: 500mm/700mm, max. screen frame size: 700mm/950mm, min./max. screen frame profile height: 25mm/54mm, max. substrate thickness: 120mm, working height: 940mm, screen frame lift: 300mm, min./max. printing speed: 125mm/s/750mm/s, control: PLC. machine dimensions X/Y/Z: 1300mm/1060mm/1600mm, weight: 485kg. Documentation available. Inspection possible by appointment. The terminology flat-bed screen printing machine, vacuum table, screen frame lift and PLC follows established industry usage.

Two Gallus rotary screen printing units for the Arsoma EM 280 with peripheral equipment are available. Printing process: rotary screen printing, roller width, max. screen printing width: 270mm, side register adjustment range: +/-5mm, max. speed: 150m/min. Including various screen rings, welding unit, bonding fixture, mounting plate and trolley. Documentation available. An on-site inspection is possible.

Offered is a single-color pad printing machine by Printing International. Cliché size: 100mm/100mm, max. workpiece size: approx. 130mm/170mm, max. print image diameter: approx. 60mm, max. pad stroke: 100mm, max. output: 1200cycles/h. The machine is pneumatically operated with an open ink well system. Viewing by appointment is possible.

Reference ID PP-59633 Category Screen Printer Manufacturer - Model S-LINE Year Built 2022 Color - Impression - Working Hours - Speed - - Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description Screen Printing Carousel for Textile Printing VERSATRONIC S-lim Number of stations / pallets: 8 Number of print heads: 6 Maximum printing area: 400 x 450 mm Pallet drive: frequency-controlled AC servo gear drive Squeegee Drive System High-precision AC servo drive 4-piston POWER squeegee system Main Control Rotary arm with control panel and 7" SMART touchscreen Microprocessor with diagnostic program Printing Programs 6 standard programs High opacity MULTIFLASH program Cooling stop Test print Start / stop Screen cleaning mode Pallet stop between print heads Free running mode Accessories 8 aluminium sandwich pallets 420 x ...

Offered is a repair-needing single-color pad printing machine Tampoprint. Doctor cup diameter: 90mm, max. print image diameter: 85mm, cliché size: 100×215mm, printing force: approx. 1100N, max. pad stroke above printed material: 110-150mm, pad stroke above cliché: 40mm, max. pad installation height: 92mm. Machine weight: approx. 120kg, dimensions X/Y/Z: 600mm/1000mm/900mm. The machine is mechanically in order, but only prints in continuous operation, and the dwell time function is no longer available. Inspection possible by arrangement.

A Flashforge 3D printer including the associated filament drying and storage unit is available. 1) Industrial FFF-3D printer Flashforge Creator 4A with HT extruder, build volume dimensions X/Y/Z: 400mm/350mm/500mm, layer height range: 0.05mm-0.4mm, printing accuracy: +/-0.2mm, max. printing speed: 200mm/s, max. extruder temperature HS/HT: 360°C/320°C, machine dimensions X/Y/Z: approx. 850mm/700mm/1000mm, weight: approx. 100kg, operating hours: approx. 5600h. 2) Mobile Flashforge filament drying and storage station, max. drying temperature: 120°C, drying chamber dimensions X/Y/Z: 500mm/375mm/200mm, machine dimensions X/Y/Z: approx. 840mm/675mm/600mm, weight: approx. 70kg. Including F extruder, HS extruder, 2x HT extruders and a tool set. The mainboard was replaced at approx. 4378 operating hours. Documentation available. An on-site inspection is possible.

Reference Num.: 4447Brand: HeidelbergType: KSB Cylinder 40 x 57 cmAvailable: directlyStatus: In productionLocation: Deutschland

A repair-required Summa tangential plotter is available. Media width range: 170mm-1620mm, max. cutting width: 1575mm, max. cutting speed: 800mm/s, material thickness range: 0.05mm-0.25mm, repeatability: +/-0.1mm. Machine dimensions X/Y/Z: approx. 2300mm/550mm/1100mm, weight: approx. 75kg. The cutting head of the machine has an unknown defect. An on-site inspection is possible.

A screen printing system is offered. This was extensively overhauled in 2016 and has rarely been used since then.

A two-color sheet-fed gravure printing press H.C. Moog is available. Paper weight range: 80g-400g/m², max. cardboard weight: 400g/m², max. printing dimensions X/Y: 720mm/1040mm, cylinder diameter: 300mm, max. production speed: 10000sheets/h, printing units: 2, drying stations: 4, gripper fields: 13, UV power: 3×160W, power consumption: 81kW. Includes Heidelberg high-performance stream feeder, Grafix intermediate dryer, intermediate dryer heater, air flotation dryer, UV drying unit, water cooling and cylinder transport trolley. Documentation available. An on-site inspection is possible.

Cutting length: 1700mm, squeegee rubber thickness: 5-10mm, coolant consumption: approx. 0.04l/m, connection voltage: 400V, 50Hz, 3 phases, connected load: 1kW, compressed air connection: 6bar, compressed air consumption: 2.5l/min, length: 2900mm, width: 784mm, height: 1250mm, weight: 430kg. An inspection on site is possible.

- 5 letterpress printing units with magnetic cylinders, - 1 Flexo-Varnishing-Unit, - 6 UV drying (air-cooled), - Rotary die-cutting unit with a magnetic cylinder, - GAP Master, - BST POWER SCOPE 3000 Pro Mark Edition - Video system for print image inspection, The scope of delivery also includes a rear-side rotary die-cutting unit;, this can be fitted in place of the flexo varnishing unit., Fully rotary 355.6 mm, Web width max.: 340 mm, Web width min.: 120 mm, Track width max.: 340 mm, Maximum track width: 340 mm, Bag width min.: 120 mm