other construction machines used for sale (689)

Manufacturer: Terex Finlay Model: 883 Year of Manufacture: 2010 Machine Type : Mobile heavy duty screener Operating hours: 8867 h Find more here - / Contact us at -

Manufacturer: Kleemann Model: Mobicat MC 102 RH Year of Manufacture: 1999 Machine Type : Mobile Jaw Crusher Operating Hours : Approx. 17,000 hours (counter defective) The Mobicat MC 102 RH is one of the most widely used mobile crushing units in the Kleemann range, valued for its reliability, high throughput capacity, and ease of operation on quarry, recycling, and demolition sites. Find more here - / Contact us at -

Manufacturer: SEBA Model: Lite Track 70-40 New Evolution Year of Manufacture: 2022 Operating hours : 45 h Technical Specifications - Operating weight: 12,000 kg - Transport length: 5,300 mm - Working length: 8,630 mm - Width: 2,420 mm - Height: 2,750 mm - Engine: Yanmar diesel, 53.7 kW / 850-2,000 rpm - Travel speed: 0.7 - 1.3 km/h - Maximum gradient: 30% - Conveyor belt speed: 1.85 m/sec - Hopper capacity: 2.5 cubic metres - Output capacity: 10 - 45 cubic metres per hour - Jaw opening: 700 x 400 mm - Hydraulic jaw gap adjustment: 15 - 100 mm Standard Equipment and Features - Vibrating feeder with pre-screening grizzly - Reversible discharge conveyor for pre-screened material - Remote control for all machine movements, including 2 battery packs - Level sensor at crusher inlet - Magnetic separation belt - Anti-dust system - Lighting for night operation - Video camera moni ...

Manufacturer: LUTRO Model: KSP 6 BT Year of Manufacture: 2013 Maximum Vehicle Length: 5 m Maximum Vehicle Width: 3 m Maximum Vehicle Height: 3 m Maximum Roof Load: 700 kg Usable Area: 105 m² Total Room Volume: 144 m³ Air Capacity: 24,250 m³/h Air Speed: 0.26 m/s Fan Power: 8.26 kW Heating Output: 280 kW Maximum Temperature: 80 °C Gas Throughput: 280,000 kJ/h Gas Consumption (Full Load): 11.4 m³/h Fresh Air Requirement: 90 m³/min Minimum Burn Time: 1 min Certification: CE Find more here - / Contact us at -

attention! To participate in this auction, a deposit of € 25 is required, which will be withheld until the outcome of the contradictory verification of the state of the places and the prior deposition of safety documentation that can be consulted after the signing of an NDA. The deposit is to be paid by bank transfer to the current account in the name of Surplex Srl. To request further information: m.tosin@tbauctions.com Lot consisting of various construction equipment, including DEWALT hammer drill, HILTI hose, HILTI rotary hammer, various pallet trucks. The list drawn up by the expert is attached to this announcement. The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The complete floor cleaning of the respec ...

TRAKMIX – MOBILE CONTINUOUS MIXING UNIT First introduced in 2015, Trakmix is a tracked mobile continuous mixing unit designed for rapid deployment and high-volume production. Its tracked undercarriage eliminates the need for transportation permits, allowing easy movement between sites. Capable of producing up to 250 TPH, it delivers precise and consistent mixing for a wide range of construction applications. The unit is fully self-contained and can be set up in minutes via remote control, with complete weighing of all materials for operational accuracy. KEY FEATURES • Tracked undercarriage for ultra mobility • No transportation permits required • Continuous mixing capacity up to 250 TPH • Self-contained unit with onboard diesel generator • Integrated silo, hopper, mixer, and control panel • Rapid remote-controlled setup • Full weighing capability for all material ...

RAPIDMIX – MOBILE CONTINUOUS MIXING PLANT Rapidmix is a high-capacity mobile mixing system developed over two decades of engineering. It delivers accurate, reliable continuous mixing for large construction and civil projects. With output options of 400 TPH or 600 TPH, the plant provides outstanding productivity and cost efficiency. Fully self-contained and hydraulically erected, Rapidmix moves easily between sites and is ready for operation within minutes. The built-in weighing system ensures precise measurement and process control for all materials. KEY FEATURES • Mobile continuous mixing plant • Output options: 400 TPH and 600 TPH • Integrated weighing system for all materials • Onboard 6-cylinder diesel generator • Hydraulic setup for fast commissioning • Single-load road-towable transport • Automated control system with 15" touch-screen HMI • 40-tonne onb ...

TRANSBATCH – MOBILE CONCRETE BATCHING PLANT First launched in 2012, Transbatch is a single-load, fully mobile concrete batching plant designed for fast setup and efficient concrete production. With output capacities from 40 m³/hr to 100 m³/hr, it ensures precise batching through fully weighed cement, water, and aggregate measurement. Its compact structure folds for transport and can be installed in approximately 10 days, reducing onsite downtime. KEY FEATURES • Fully mobile, single-load batching plant • Output capacity from 40–100 m³/hr • Accurate weighing of cement, water, and aggregates • Quick installation to reduce downtime • Compact design that folds and partly dismantles for transport • Transportable as a single road-legal unit TECHNICAL HIGHLIGHTS Output • Production up to 100 m³/hr Weighing System • Full weighing capability for cement, water,  ...

AMB pre-shredding machine type 753 The plant is already completely dismantled, incl. the hydraulic aggregates and would be ready for pick-up The machine was built in 2004 and was used by us for the pre-shredding of household and bulky waste. It then served as a backup from 2010 to 2022. We have already dismantled the machine and hydraulic unit and stored them on site. Before dismantling, we carried out another test run - without any problems. As the plant had already been dismantled, there was no time pressure. As part of the optimization of the system, the manufacturer AMB installed two additional drives for the shafts - as can be seen in the pictures. Find more here - / Contact us at -

Manufacturer: Freight Model: FL80 Year of Manufacture: 2002 Type of Machine : geotechnical drilling unit 10 wheels 8.3 L cumins engine. Perfect mechanical condition CVM good until April 2026 Equipment: CME-75 2002 Low torque mounted Find more here - / Contact us at -

Manufacturer : FRAVIZEL Model: Lynx + Halley MFCR55 Type of Machine : wire saw systems for block mining in a quarry. Year of Manufacture: 2022 Commissioned: 2023 Condition: The machine is relatively new and have seen little use. Find more here - / Contact us at -

Manufacturer: FRAVIZEL Model: Kepler MFR55 Year of Manufacture: 2023 Commissioned: 2023 Type of Machine : wire saw systems for block mining in a quarry. Condition: The machine is relatively new and have seen little use. Find more here - / Contact us at -

Manufacturer: FRAVIZEL Model: Zenith MFFR90 Year of Manufacture: 2022 Commissioned: 2023 Type of Machine : Drilling Rig Condition: The machines is relatively new and have seen little use. Find more here - / Contact us at -

Manufacturer: Central Mine Equipment Model: 75 Year of Manufacture: 1972 Type of Machine : drill for geotechnics Km Count : 165208 kilometers Find more here - / Contact us at -

Concrete Mixing Plant 1: Manufacturer: ELBA- Model: Supermobil ESM 60 Year of Manufacture: 1998 Status: Decommissioned Technical Specifications: - Rated Output: Approx. 30 m³/h - Dosing Unit: - Loaded by wheel loader - Total capacity: 180 m³ - Four chambers: 4 × 45 m³ (25t each) - Binder Storage: - 3 vertical silos - Each silo approx. 66 m³ (80t) at a density of 1.2 t/m³ - Dosing System: - Aggregates: via weighbelt, 2500 kg - Binder: via container scale, 500 kg - Water: via container scale, 500 kg - Additives: - Two-chamber liquid additive scale, 2 × 12.5 liters, 25 kg total - Mixing Equipment: - 1 EMS 1000C single-shaft compulsory mixer - Concrete discharge: 1,000 liters - Discharge Height: - For truck mixer and truck loading: 4.00 m - Control System: - Fully automatic with computer - Operator container included - Electrical supply: 400 V, 50 Hz, 3-phase, 104 A fuse Concr ...

Manufacturer: ATLAS COPROD Model: ROC - L7(40) CR Year of Manufacture: 2008 Engine Hours (Old engine) : 8,043 - New reconditioned engine was installed recently. Find more here - / Contact us at -

Manufacturer: Genie Model: GTH-5021R Year of Manufacture: 2016 Mass: 16,653 kg (36,712 lbs) Rated Capacity: 5,000 kg Nominal Power: 83 kW Max Drawbar Pull at Coupling Hook: 30,000 N Max Vertical Load at Coupling Hook: 10,000 N Lifting height: 20.86 m Engine: Perkins 854E-E34TA All-wheel drive Remote joystick Full serviced at 4550 h Extra accessories: - Pallet forks - Bucket - Hook Find more here - / Contact us at -

MAIN FEATURES of the Machine: ENGINE - FIAT N67 - Power: 151 kW (202 HP) - EU Stage V DRIVE - Independent hydrostatic dual-circuit electric drive - Travel speed: 0-10 km/h (forward/reverse) TANK CAPACITY - Fuel tank: 389 l - Cooling system: 29 l - Engine oil: 14 l - Hydraulic oil tank: 115 l DIMENSIONS - Operating weight: 18,830 kg - Machine height: 3,180 mm - Total machine length: 5,800 mm Highlights of the SD16L: - Drive System: Shantui’s proprietary drive system is optimally tuned to the engine curve, providing excellent traction and efficient power transmission. - Maintenance and Operator Comfort: Side covers can be opened for easy maintenance. The ergonomically designed, spacious cab offers excellent visibility. - Adaptability: With its wide track contact surface, the bulldozer is particularly suitable for challenging terrain such as wetlands and marshes.

Scrap shears and a package compactor = machines are from the 1960s Find more here - /

Manufacturer: Spielvogel Model 2700 Year Of Manufacture: 1990 Type of Machine: Block Stone Circular Saw Machine Details: Blade diameter approx. 270 cm, 380V, 50Hz Machine Powered: Yes Operating Hours: Approx. 30,000h Additional Accessories: Rotary table, automatic cutting sequence Find more here - / Contact us at -

Double Shield Tunnel Boring Machine for hard rock Typ of TBM Hardrock Double Shield TBM Manufacturer Robbins / Herrenknecht Year of manufacture 2015, 2020 Boring diameter DME = 7.100 m Length 14 m Main drive power 7 x 330 kW = 2.310 kW Main trust force 33.780 kN @ 350 bar Stroke length 1.760 mm Installed power 4.800 kVA Weight ca. 770 t Find more here - /