gear cutting and hobbing machines used for sale (210)

7 stueck LORENZ or LIEBHERR Schraegfuehrungen - see pictureFurther:Airfilter (Euro 1000,--)

CHURCHILL PH3615 gear hobbing machine Max workpiece diameter 914 mm Max diametral/ pitch- 8 Module, 3 D.P. Horizontal centre distance:-63,5- 559 mm Max horizontal travel 469 mm Height hob centre to worktable: 127- 508 mm Max travel of vertical feed 381 mm Max height worktable to tailstock centre768 mm Table diameter 762 mm Table hole (diameter x depth) 89 x 381 mm Hob dia x length 178 x 203 mm Max travel of hob slide 127 mm Diameter of hob arbor 32 mm Hob spindle speeds, infinitely variable 50 – 200 rpm Vertical feeds 0.38 – 5 mm Main drive motor 10 HP Floor area 3960 x 2130 x 2300 mm Weight 11,500 kg Extended set of change gears Complete documentation Operational variable speed drives for main motor and feed drives

MODUL ZFWZ 1250x14I gear hober (can do 1580 mm) Max. Diameter: 1250 mm Cutting width: 600 mm Module 2-16 Maximum size of the hob: 240 x 280 mm Table diameter: 1020 mm Speeds: 28 – 200 rpm Axial feed rates: 0.28 – 8 mm/min Radial feed rates: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Stand tilt – left/right: +/- 45 Main motor power: 5 / 19.5 kW Power of the rapids motor: 12,5 kW Max. diameter of the part without tailstock: 1,250 mm Max. diameter of the part with tailstock: 800 mm Weight of the machine : 16 t Machine dimensions approx. 4.5 x 2.1 x h 3.3 m EQUIPMENT: Extended driven shaft for gear cutting up to Ø 1580 mm Capability to work with hob cutters Ø 235 mm and length 380 mm. Inverter control of the main electric motor. Expanded set of change gears

MODUL ZFWZ 630 Gear hobbing machine Wheel diameter 630-710 mm Gear width 400 mm Module 1-10 Max. axial feeding travel 400 mm Max. tangential feeding travel (hob shift) 200 mm Max. helix angle 45 degrees Min. number of teeth hobbed 10 Min. number of teeth hobbed with indexing drive 5 Max. hob diameter 200 mm Max. hob length 250 mm Diameter of working table 580 mm Hole in working table 100-250 mm Depth of hole in working table 45-300 mm Distance center of hob to working table surface 175-575 mm Driving taper for hob arbor (step taper) 50 mm Hob speeds of universal hobbing head steeped 50-400 rpm Milling spindle speeds (infinitely variable) 40-400 rpm Power capacity 29 kW Machine dimensions 3380x2715x2250 mm Machine weight: 9200 kg

MODUL ZFWZ 3150/3 Gear hobbing machine max. wheel dia. 3150 mm min. wheel dia. 500 mm max. wheel diameter with outboard-support 1600 mm max. module 30 mm gear width 1000 mm max. helical angle 45 deg tangential adjustment 500 mm cutter length max. 440 mm diameter of cutter (hob) 350 mm table diameter 2400 mm table bore diameter 500 mm depth of hole 1100 m table load max. 30 t Accessories Dimnsions 6700x5400x4800 mm Weight 65000 kg

KOEPFER 151 Gear Hobbing Machine - Horizontal Available 2 machines. Semi-automatic machine Max. gear dia 150 mm Module 2 Max Profile depth / Plunge cut depth 7 mm Max hobbing length 135 mm Max length of workpiece, approx. 280 mm Hob slide swivable 250 degrees Hob size dia x length 65 x 60 mm Hob shifting, manually max. 40 mm Hob Spindle speeds 140 – 1120 rpm Workspindle bore 24 mm Bore of collet chuck, max. 3 – 24 mm Feed range, axial/plunge cut 0.06 – 2 mm/rev No. of teeth, min./max. 6 - 200 Spindle Drive/Total electrical load, approx. 2,2 / 4 kW Weight, approx. 1,400 kg Very good condition

Circulation cutter from Klingelberg

Planing comb to Maag gear planing machine

The machine is in good technical condition, testing is possible by prior arrangement.

Max. workpiece diameter... 1000mm Module ... 10- Main engine power ... 7.5kW L x W x H ... 3120 x 1870 x 2525mm Machine weight ... 10000kg

[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears

SH75 max. wheel diameter 750 mm gear width 200 mm max. module 10 min. module 1 min. wheel diameter 30 mm max. number of teeth 300 min. number of teeth 6 tooth helical angle min/max 0 / 60 ° min. ram stroke 0 mm max. ram stroke 225 mm table diameter 500 mm table load 0,8 t no. of strokes 23,5 - 150 Hub/min table hole 90 mm total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,1 x 1,7 x 2,1 m

PFAUTER PE 150 Hobbing machine GENERAL Project No.: 906008 Quantity: 1 pcs. Manufacturer: PFAUTER Type: PE 150 Control: Siemens 840 D powerline Year of manufacture: 1991/2009 Condition: Used machine Engine Approx (hrs): 33500 DESCRIPTION GEAR CUTTING Max. head circle diameter 150 mm Carriage stroke Z'-axis 200 mm Travel in X 150 mm Module 1-3 mm Bevel angle +30 to/to -45 degrees Max. tooth width 150 mm Max. diameter hob 130 mm Max. length of hob 220 mm Tailstock OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Electrostatic oil/emulsion mist extraction system Chip conveyor Engine is/was operated with oil Coolant Setup Circumferential Parts Storage Belt GENERAL TECHNICAL DATA Mains fuse 100 A Total power requirement 49 kVA Machine dimensions (LxWxH) approx. 5820x4047x2810 m ...

Qty. 1 Second-hand Slab Surface Scalper Mfc.: TBA Built: 1972 Scalped Slab Dimensions: 1000-3000 x 740-2000 x 180-350 mm – L x W x T Main Drive Electric Motor Power: 250 kW, 380 V, 735 RPM Scalping depth at once: 4-5 mm Capacity: Average 7 tons/h (For 1040 mm width slab)

In Stock

Liebherr WSC 1200____________Description:In General:Year of manufacture:2009Control system:Siemens 840 DExternal gear diameter:1,200 mmInternal gear diameter:1,200 mmMaximum gear width:260 mmMaximum workpiece diameter:1,500 mmMachine base:Travel:600 mmLateral adjustment:+/- 60 mmCutting head:Spindle diameter:125 mmTool holder:SK 45Distance between spindle and table:0–820 mmStroke length:270 mmMax. module:16 mmMax. tool diameter:300 mmMax. spindle speed:25 rpmTable:Table diameter:900 mmTable bore:320 mmBore depth:520 mmMax. speed:12 rpmMax. table load:95 kNEquipment:Chip removal:2 magnetic belt conveyorsCoolant supply:Cutting oil system with filter and temperature controlSet-up operation:Electronic handwheel

industrial furnace Uterna 2x2x2m 650C auto door PLC

Key data: 600 mm, 20

The Mahr Primar GMX 600 gear measuring machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of measuring gears, camshafts, rotationally symmetrical components, tools. . Technical data Diameter: 600 mm Module: 20 mm Axial travel: 700 mm Dimensions: 2,300 x 2,400 x 1,800 m Machine weight: approx. 5,000 kg Information and data are non-binding, subject to prior sale Special features: Can be delivered as a used machine or as a retrofit with a new control system based on Siemens and measurement software.

Complete production line for bevel gears, consisting of 6 bevel gear milling machines Klingelnberg BF 201 including orders for contract work for sale Technical data Diameter: 240 mm Module: 10 mm Tooth width: 60 mm Dimensions: 2.3 x 2 x 1.7 m Machine weight: approx. 6,700 kg Information and data are non-binding, subject to prior sale Special features: Complete production line consisting of 6 machines with the following accessories: - Bevel gear machine - 1x interchangeable gear set - 1x test block - Mounts (proportionate) - Knife set (proportionate) - Documentation (1xOriginal / data set) Furthermore, contract gear orders could follow, catalogue goods and special bevel gear sets according to customer specifications, complete volume approx. 8,000 components / year. Asking price of the seller 18.000.- VB / per machine

Key data: 540

The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of noise and contact pattern tests on bevel gears and hypoid gears. Technical data Diameter: 540 (400) mm Hypoid: ±50 mm mm Pinion spindle Dm: 90 mm mm Dimensions: 1,800 x 1,800 x 1,600 m Machine weight: approx. 2,800 kg Information and data are non-binding, subject to prior sale Special features: The machine is intended for noise and contact pattern tests on bevel and hypoid gears of all gears. By simulating operating conditions, applying different speeds and changing the load states for drive and outlet, the optimal installation distance for standstill can be determined. Digital actual value display for 2 axes Stepless speed adjustment via frequency converter Electrically fused and acceptabl ...

Key data: 450

The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera »  ...

tip circle diameter: 650/800 mmworkpiece length - max.: 1100 mmmax. module: 20 (25) mmmin. module: 0,5 mmcontrol: Siemens Sinumerik 840 D total connected load: 62 kVAhelical angle: -45 / + 120 °weight of the machine ca.: 10 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1000 mmgear width: 630 mmmax. module: 16 min. module: 1 wheel diameter with counterstay: 800 mmmax. number of teeth: 999 clamping length: 1060 mmworkpiece weight: 1500 kgmax.helical angle: 45 °grinding spindle drive: ca. 20 kWControl: Opal / Siemens total power requirement: 70 kWweight of the machine ca.: 17,5 t- CNC control Opal / Indramat with Siemens S5 PLC- paperbandfilter- oil mist exhauster- complete coveringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1250 mmgear width: 430 mmmax. module: 30 min. module: 2 no. of teeth: 10 - 400 max.helical angle: 45 °Stößelhublänge: 25 - 450 mmstroke position adjustment: 310 mmDoppelhubzahl - stufenlos: 70 - 190 U/mingrinding wheel diam. min/max.: 290 - 400 mmtable diameter: 1000 mmtable load: 4000 kpdimensions of the machine ca.: 7,7 x 4,5 x 3,3 mtotal power requirement: 30 kWweight of the machine ca.: 28 t- Complete covering- Oil mist extraction- Coolant system- counter Holder- change Gears- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 630 mm, 8

Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800

Key data: 630 mm, 8

A used gear pusher Lorenz S8/630 with interchangeable wheels.

max. wheel diameter: 630 mmgear width: 215 mmmax. module: 12 min. module: 1 number of teeth: 5 - 140 stroke length max.: 225 mmtable diameter: 500 mmtable load: 400 kpgrinding wheel diam. min/max.: 270-350 mmmax.helical angle: 45 °no. of strokes: 75 - 315 p.M.total power requirement: 8,5 kWweight of the machine ca.: 6,3 tdimensions of the machine ca.: 3,2 x 3,6 x 3,7 mchange gears,program control,complete covering,coolant/Filtering attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 900 mmy-travel: 300 mmz-travel: 1000 mmcontrol: Siemens Sinumerik 840D max. workpiece diameter: 1600 mmmax. module: 20 mmtip circle diameter: 350 mmMilling arbour diameter: 375 mmTotal closing value: 80 kVaweight of the machine ca.: 33,5 tdimensions of the machine ca.: 10,530 x 6,375 x 4,680 mFeed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/minSpindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 780 mmgear width: 130 mmmax. module: 8 / 10 table diameter: 510 mmtable bore diameter: 160 mmnumber of strokes (double strokes): 30 - 1500 DH/minControl: Siemens Sinumerik 3 distance table - lower edge of ram: 650 mmtable-size: 500 mmtotal power requirement: 36 kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4,9 x 3,65 x 3,8 mThe machine is suitable for:- Internal and external gear teeth in small quantities- Internal gear teeth in blind holes (non-through holes)- External gear teeth without run-out, as hobbing would not be possibleExamples of components are: Internal gear rings for planetary gears, drive shafts, clutch hubs...- Siemens Sinumerik 3 CNC control- Chip conveyorMachine was only used sporadicallyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.