A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible.

TECHNICAL SPECIFICATIONS Manufacturer: MRS Description: Motorized clamshell grab with electro-hydraulic drive Type: Hydraulic Year of Make: 2006 Content: 6.8 cbm Net weight: 10,000 kg Flat bulk density: 2.0 t/cbm Dump cone: 20° Closing time: 19.0 sec. Opening time: 10.0 sec. Hydraulic pressure "close": 240 bar Hydraulic pressure "open": 180 bar Electric motor: 55 kW Transport dimensions (length/width/height): 4,400 x 2,000 x 3,930 mm

TECHNICAL SPECIFICATIONS Manufacturer: ROHR Designation: Floating grab system Type: 5.5 Year: unknown (80s) Gripper capacity: 5.5 cbm Hoist: 2 x 120 kW Gearbox Type: HD 236 (Mannesmann Demag) Screening machine: Främbs&Freudenberg ECK 1500/5000/1 SPECIFIC COMMENT - In need of repair and overhaul! - Incl. MRS gripper 5.5 cbm - Incl. cat with hoist - Pontoons dry

TECHNICAL SPECIFICATIONS Manufacturer: MRS Greifer- und Maschinenbau Designation: Motor Double-Shell UW Excavator Grab Type: 5.5 Content: 5.5 m³ Year of Make: 2000 Net weight: 7,500 kg

A loader GHH for the coal mining industry is available. Bucket volume: approx. 2.5m³, payload: 6000kg, max. speed: 22.5km/h, max. dumping height: approx. 1500mm, turning radius: approx. 6m, articulation angle: +/-42°, max. gradeability: 25%, rated power: 102kW, lifting pressure: 190bar, steering pressure: 150bar, lifting time: 5s, max. tractive force: approx. 180kN. Machine dimensions X/Y/Z: approx. 9200mm/2100mm/2350mm, unladen weight: approx. 17000kg. Documentation available. An on-site inspection is possible.

I buy a compact excavator built in 2013 in very good condition. Specifications Engine: Kubota V2607, 4 cylinders, 36 kW (diesel) Machine weight: 5,615 kg Equipment & Condition: Starts immediately, drives and all functions work flawlessly Rubber tracks in good condition Shield / Loading bucket with quick coupler 1 spoon included Air conditioning available, but currently without belts New battery installed Transportation can be organized More photos are available on request – viewing is highly recommended. Price is net (excluding VAT). Nameplate and serial number will be gladly communicated if you are seriously interested.

A crawler-mounted crushing plant Remax including a land conveyor system is available. 1) Double roll crusher Remax CR 810 Hybrid, year of manufacture: 2015, operating weight: approx. 230t, conveyor belt width: 1600mm, conveyor belt length: 12200mm, discharge belt type: Mobcon, discharge belt width: 1400mm, discharge belt length: 40m, feed hopper volume: approx. 30m², feed hopper length: 4500mm, feed hopper width: 6000mm. Including plate conveyor (1.8m/9.5m) with crawler track, cleaning conveyor (2m/5.3m), transfer station (1800mm/1800mm), electrical equipment and control. 2) Two-part land conveyor system, year of manufacture: 2015, width: 1400mm, belt speed: 1.5m/s, conveying capacity: approx. 1000t/h, length 1/2: 190m/165m. The enclosure of the land conveyor system is only partially available. Documentation available. An on-site inspection is possible.

Working height: 15m, max. load capacity: 227kg, max. number of persons: 2, max. person weight: 150kg, max. wind speed: 12.5m/s, wheelbase: 1930mm, ground clearance: 150mm, max. horizontal reach: approx. 6500mm, platform inner dimensions X/Y: 1220mm/760mm. Machine dimensions X/Y/Z: approx. 6000mm/1500mm/2000mm, weight: approx. 7000kg. An on-site inspection is possible.

A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1 ...

Two identical timelapse cameras Enlaps, one of them including an annual license, are available. Years of manufacture: 2023/2024, image sensors: 2, camera resolution: 12MP, single image resolution: 2x4608/3456 pixels, panorama resolution: 6K, combined field of view: 220°, min. capture interval: 30s, device dimensions X/Y/Z: approx. 210mm/180mm/70mm, weight: approx. 20kg. Both devices are equipped with reinforcement plates and mounting arms. The device manufactured in 2024 additionally includes a myTikee PRO Storytelling license. Documentation available. An on-site inspection is possible.

Working height: 8100mm, platform height: 6100mm, load capacity: 360kg, platform dimensions X/Y: 2300mm/760mm, transport length: 2300mm, weight: approx. 1970kg, operating hours: approx. 556h. An on-site inspection is possible.

ID3595 Liebherr LH50 M Litr. year/Baujahr 2015 8.900 hours/hours Industrial monoblock boom, straight 9.60 m, industrial stick, stick end sharply angled 7.50 m with hydraulic quick coupler, medium-pressure circuit, grab lines, VarioLiftPlus 2A, active lowering of the lifting cylinder, support: rear and front outriggers, single tires, 16.00-25, protection for piston rods, outriggers and piston rods rear and front, GTS 13 kW generator system, hydraulic, LHC 255 cab elevation, magnet system, push button on the right joystick, various grabs are also available on request Industrial monobloc boom straight 9.60 m, industrial stick, stick end strongly angled 7.50 m with hydraulic quick coupler, medium pressure circuit, grab lines, VarioLiftPlus 2A, lifting cylinder actively lowered, support: claws at the rear and front, single tyres, 16.00-25, protection for piston rods, claws and piston ro ...

ID3129 MRS 6,8 cbm grapple 6.8 cbm MRS hydraulic grab 6.8 cbm MRS Hydraulic Grab

A complete and automated OMAG paving block production line is available. Components: 1) Drawing plate for Colormix in the hopper. 2) InLine washing system. 3) Drying side Rekers. 4) Handling Rekers. 5) Rekers control system. 6) Rekers fork carriage. 7) Part of the drying chamber racks, as they are load carriers for the building. 8) Board crane as buffer placer and empty boards. 9) Cyklop horizontal strapping. Without strapping and boards. Concrete feed: 2-axis bucket, output with 90x90 paving blocks: 1000-1100/shift, board size: 1000mm/1400mm, max. format size: 1000mm/1400mm. Completely new OMAG control system in 2017. Conversion to proportional valves in 2014. Documentation available. On-site inspection is possible.

Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible.

A Liebherr PR 722 B bulldozer (crawler) is available. Engine type: Liebherr D 924 T-E, engine power: 97kW(132hp), displacement: 6.7l(6700cm³), max. speed: 11km/h, track width: 610mm, height above cab: 3100mm, transport dimensions X/Y/Z: approx. 3890mm/2410mm/3100mm, weight: approx. 15400kg, operating hours: 11884h. The right drive of the machine is leaking. Documentation available. On-site inspection is possible.

A Containex shower container including water boiler Austria Email is available. 1) Container Containex 20ft S, year of construction: 1994, length: 20 feet (approx. 6096mm), equipment: shower cubicles, washbasin, urinal, window. 2) Water boiler Austria Email (Havel Therm) VS-300-EU, volume: 300l, operating pressure: 10bar, test pressure: 15bar, max. operating temperature: 95°C, max. heat output: 150kW, heating time 6kW/4kW/3kW: 4h/6h/8h. Suitable for drinking water. Documentation available. On-site inspection is possible.

: . Number of working hours: 275 h: . quick coupler: MS 01 Guarantee: noch 11 Monate weight: 1087 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Hersteller CAT : Stemmhammer CAT : für 2,5 - 4 t Bagger : ohne! : Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL SPECIFICATIONS Manufacturer: DÖPKE Description: Suction Dredger Plant Type: S III D Year of Make: 1999 Excavator depth: max. 27 m Excavator depth at 60° pipe inclination: 20 m Conveyor mixture performance: approx. 800 cbm/h Solids capacity: approx. 225 t/h (sand) Propulsion: Scania V8 diesel engine, power 299 kW Warman high-pressure gravel pump: Type 10/8 F-GH Tank Pump: Yes Intake manifold connection: NW 350 Pressure pipe connection: NW 250 Number of mooring winches: 4 pcs. (hydraulic) Pulling force of mooring winches: approx. 1,000 kg Fuel tank volume: 2.000 Ltr. Total weight: approx. 30 t. Operating hours: approx. 13,000 h Draught: approx. 700 mm SPECIFIC COMMENT - If you are interested, also approx. 400 m pressure pipe available, NW 250 - Good technical condition, fully functional

ID3550 Caterpillar MH3024 year/Baujahr 2015 approx. 12500 hours/hours Material handlers with 4 outriggers, elevating cabin, HGT grab 600 liters (built in 2021) Material handler with 4 outriggers, elevating cab, HGT grab 600 litres (built in 2021)

English: Model: MB12 Bucket capacity - 0.022 m³ Chassis width - 930 mm Track length - 1200 mm Chassis ground clearance - 370 mm Gradeability - 30° Track width - 180 mm Tank volume - 5.5 L Transport length - 2870 mm Excavator height - 2285 mm Overall dimension - 2870 x 930 x 2285 mm Engine model - Koop 192F / Kubota D722 Engine power - 7.6 kW / 2400 rpm; 10.2 kW; 10 kW / 420 cc Turning radius - 1490 mm Max. digging height - 2490 mm Max. dumping height - 1745 mm Max. digging depth - 1725 mm Max. digging radius - 3030 mm Max. vertical digging depth - 1655 mm Bucket digging force - 6.5 kN Operating weight - 1200 kg All machines are new and come with a one-year warranty. Additional attachments such as rakes, augers, buckets, or grapples can be added to your order if needed. You can choose from a variety of engines that vary in si ...

ID3425 MRS type 2-5 year/Baujahr 2019 6.4 t Motorized clamshell bucket with electro-hydraulic drive, 4.3 cbm capacity, (was only in use for 1 year, dredged approx. 200,000 cbm), inclusive identical bucket (built in 2008) as spare parts carrier (the predecessor of the new bucket) Motorized clamshell grab with electro-hydraulic drive, 4.3 cbm capacity, (was only in use for 1 year, excavated approx. 200,000 cbm), including identical grab (built in 2008) as spare parts carrier (the predecessor of the new grapple)

TECHNICAL SPECIFICATIONS Manufacturer: ROHR Designation: Floating grab system Design: Catamaran construction, floating Type: RS 8.2 - 230 PK Year of Make: 1981 Gripper capacity: 8 cbm Grab weight: approx. 10.5 t Excavator depth: 60 m Hoist winch motors: 2 x 175 kW Lifting gear: 2 pcs. Fabr. DEMAG, type HDH 236 Number of mooring winches: 4 pcs. Pontoon dimensions: - Length: 22,000 mm - Width: 24,000 mm - Height: 2,000 mm - Draught: 1,400 mm SPECIFIC COMMENT - Fully functional mining equipment - If required, an associated folding barge (100 cbm) can be offered - Incl. 1 spare engine Mannesmann-Demag 175 kW Available from December 2024 / early 2025

TECHNICAL SPECIFICATIONS Floating dredger Manufacturer: RIEDINGER Designation: Floating dredger with floating bands and land band Type: Floating Type:SG 40 K Year of Make: 1963 Gripper capacity: 4.5 cbm Grab weight: 7.5 t Excavator depth: 60 m Number of mooring winches: 4 pcs. TECHNICAL SPECIFICATIONS Dewatering screening machine Manufacturer: WIMA Year of Make: 2021 Screen length: 5,000 mm Screen width: 2,000 mm Number of screen decks: 2 pcs. Pontoon dimensions: - Length: 15,000 mm - Width: 11,000 - Height: 1,800 mm - Draught: 1,500 mm SPECIFIC COMMENT - Fully functional dredging system - Incl. discharge belt and floating land belt - Incl. 2 new hitch gears - Incl. 90 kW spare motor - Optional land belt system also available

ID3307 2 piece Rope drum 2 piece Rope drum (e.g. for floating grabs), drum diameter: 550 mm, drum length: 2620 mm, drum wall thickness (where the rope moves): 14 mm, rope diameter: 24 mm 2 pieces rope drum (for e.g. floating grabs), drum diameter: 550 mm, drum length: 2620 mm, drum wall thickness (where the rope moves): 14 mm, rope diameter: 24 mm

If you are interested, feel free to write

If you are interested, please contact us!

We sell a Zeppelin ZR15 excavator as a spare parts carrier built in 1990 with Deutz engine F6L912, 74 kW. Spare parts from the excavator can also be purchased

TECHNICAL SPECIFICATIONS Manufacturer: MRS Greifer- und Maschinenbau Designation: Motor-Zweischalen-UW-Baggergraber Type: 2.5. Year of construction: 2014 Content: 3.5 m³ (at 20° bulk cone) Net weight: 4.900 kg Min. crane eligibility: 11.900 kg Closing time/opening time: 14.5 s / 8.0 s Required rope diameter: 22 - 24 mm Voltage/frequency/current consumption: 400V/50Hz/70 A Motor power: 37.5 kW Oil volume: 200 l Dredging depth under water: max. 100 m SPECIFIC COMMENT - Last revision 2020 - Degree of wear at approx. 50%