compressors used for sale (486)

Screw compressor Atlas Copco GA160VSD+FF. Dryer and inverter integrated. 160 kW 8.3 bar 33.10 m3/min. Year of Make: 2021 Hours: 25,495

Screw compressor Atlas Copco GA30VSDFF Inverter and dryer integrated. 30 kW 12.80 bar 5.58 m3/min Year of Make: 2013 Hours: 68,578

Screw compressor Atlas Copco GA132 132 kW 7.5 bar 25.40 m3/min Year of Make: 2017 Hours: 37,697

Key data: 22 , 13 , 4

Atlas Copco GA22VSDFF screw compressor Inverter and dryer integrated 22 kW 13 bar 3.85 m3/min Year of Make: 2008 Hours: 64,878

Screw compressor Atlas Copco GA160 160 kW 7.5 bar 30.20 m3/min Year of Make: 2017 Hours: 39,772

Screw compressor Atlas Copco ZR90VSDFF Inverter and dryer integrated. 90 kW 8.75 bar 14.70 m3/min

Second Hand Almig VARIABLE55 55 kW, 13 bar, 10.58 m3/min Year of manufacture 2016 with 42,734 hours Frequency-controlled

Screw compressor Atlas Copco GA160VSD+FF 160 kW 8.3 bar 33.10 m3/min Inverter and dryer integrated WRG integrated

Screw compressor Atlas Copco GA250 250 kW 8.5 bar 41.70 m3/min

Maximum removal of impurities. Increased quality of the final product. Extended service life of the operating process. High reliability. Low pressure loss. Service-friendly. Tested according to applicable ISO standards. Filter package Replace filter G85 1/2" residual oil 0.3 mg/m³ after 2000 hours Replace filter C85 1/2" residual oil 0.01 mg/m³ after 2000 hours Replace filter V85 1/2" residual oil 0.003 mg/m³ after 1000 hours Residual oil after filter package 0.003 mg/m³ = technically oil-free + Wall bracket + Connection kit Filter G Equipment in detail Drain: Automatic float drain valve Performance data Nominal capacity 1.42 m³/min Application: Oil Aerosol Oil aerosol concentration in the outlet 0.3 mg/m³ Total mass efficiency >99.25 % Quality class of air at the outlet (oil) 3 according to ISO 8573-1:2010 Pressure loss dry 55 mbar Pressure loss wet 125  ...

Key data: 4 , 8

Oil-free scroll compressor Compaction: Spiral compactor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Simple start/stop control Refrigeration Dryer: Integrated, Refrigerant R513A Electric condensate drain included Performance data Volume flow at operating pressure 6.75 bar 0.4 m³/min Operating pressure min. / max. 4.0 / 7.75 bar Total power consumption at 6.75 bar / full load 4.4 kW Rated power motor; IP55 3.7 kW Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 0 / 40 °C ∆ T above cooling medium temperature 0 °C Cooling air requirement 900 m³/h Free fan pressure 30 Pa Sound level 57 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer internally wired Dimensions and weight Length x width x height 1,275 x 690 x 1,450 mm ...

Key data: 7 , 10 , 1

Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor with belt drive Control: fixed speed Control: Airlogic² T touchscreen full-color display Refrigeration Dryer: Integrated Performance data Volume flow at operating pressure 9.5 bar 1.15 m³/min Operating pressure min. / max. 5.5 / 10 bar Total power consumption at 9.5 bar / full load 10.0 kW Rated power motor; IP55 7.5 kW Oil quantity 3.7 lt Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1188 m³/h Free fan pressure 30 Pa Sound level 65 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Dimensions and weight Length x width x height 1625 x 665 x 1535 mm Weight 355 kg Compressed air outlet G 3/4 "ig Capacity compressed air tank 270 lt

Key data: 7 , 10 , 1

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight Length x wi ...

Key data: 5 , 10

Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: Speed-controlled with frequency converter Control: Infologic² Connect Refrigeration Dryer: Integrated Filtration optionally available Performance data Volume flow at operating pressure 7.0 bar 0.33 - 0.75 m³/min Operating pressure min. / max. 4.0 / 10.0 bar Total power consumption at 9.5 bar / full load 7.7 kW Rated power motor; IP55 5.5 kW Oil volume 3.2 lt Pressure dew point refrigeration dryer approx. +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1140 m³/h Free fan pressure 30 Pa Sound level 61 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.19 kW Dimensions and weight Length x width x height 1540 x 600 x 1375 mm Weight 230 kg Compressed air outlet 1/2 ...

Key data: 2 , 10

New AGRE Alup screw compressor with filter unit (technically oil-free), for the operation of milking robots. IMMEDIATELY AVAILABLE from the Hengsberg warehouse in Styria! We are also happy to take care of the delivery and commissioning of the compressor and ongoing maintenance of existing compressors of the brands AGRE, Alup and Atlas Copco. Drive: Efficient IE3 motor with belt drive Control: Infologic² Connect Refrigeration dryer and 270 litre container integrated Includes filtration for technically oil-free operation Performance data Volume flow at operating pressure 9.5 bar: 0.29 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 3.7 kW Rated power motor: 2.2 kW Pressure dew point refrigeration dryer : approx. +3 °C Dimensions and weight Length x width x height 1540 x 600 x 1350 mm Weight 205 kg Compressed a ...

Key data: 2 , 10

m

Key data: 4 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 270 litre container (painted) Performance data Volume flow 504 l/min Operating pressure max. 10 bar Nominal power motor 4.0 kW Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 79 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1940 x 820 x 1600 mm Weight 150 kg Compressed air outlet coupling Capacity compressed air tank 270 lt

Key data: 3 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 90 liter container (painted) Performance data Volume flow 330 l/min Operating pressure max. 10 bar Nominal power motor 3.0 kW Number of cylinders 2 Compressor stage(s) 1 Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 79 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1065 x 615 x 1000 mm Weight 89 kg Compressed air outlet coupling Capacity compressed air tank 90 lt

Key data: 1 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 6 liter container (painted) Performance data Volume flow 270 l/min Operating pressure max. 10 bar Nominal power motor 1.8 kW Number of cylinders 1 Compressor stage(s) 1 Installation data Ambient conditions min. / max. 2 / 40 °C Sound level 73 dB(A) Voltage / Frequency 230 / 50. V / Hz Dimensions and weight Length x width x height 455 x 475 x 500 mm Weight 24 kg Compressed air outlet coupling Compressed air tank capacity 6 lt

Screw compressor GA132VSD Atlas Copco. 132 kW 8.5 bar 26.06 m3/min. Inverter integrated.

We currently have over 15 Atlas Copco GA90 in stock in various versions. Frequency-controlled. With integrated dryer.

Tested Atlas Copco ZR160VSDFF oil-free screw compressor. 160 kW Year of manufacture 2018 Only 27889 hours. Full service history. drum dryer integrated. Frequency-controlled.

Second Hand Screw Compressor Ingersoll Rand R37IE-A 37 kW, 7.6 bar at 6.46 m3/min. Built in 2013 with only 18,254 hours

Second hand oil-free Atlas Copco ZR132. 132 kW with 7.5 bar and 19.10 m3/min. Water-cooled. Built in 2010 with around 39,000 hours.

Second Hand Almig Belt15 15 kW with 10 bar and 1.98 m3/min. Year of manufacture 2015 with 12,022 hours.

Second Hand Atlas Copco GA400W (water-cooled) 400 kW, 8.5 bar at 66.60 m3/min. Year of construction 2009

Second Hand Atlas Copco GA315VSD. 315 kW with 8.5 bar and 58.50 m3/min. Year of manufacture 2019 with around 36,000 hours

Second Hand Atlas Copco GA250VSD 250 kW with 10 bar and 44.90 m3/min. Year of manufacture 2018 with around 34,000 hours

Key data: 73 , 3

Screw compressor, 500 V drive, serviced

Key data: 75 , 13 , 15

Screw compressor, 500 V drive, was serviced by Atlas Copco in 2020 and has been out of service since then. Accessories (absorption dryer, refrigeration dryer, oil/condensate separator) available for an extra charge.