beverage machines used for sale (2,143)

For sale is a labeling machine from the manufacturer Gernep. The machine was completely overhauled in 2021 and was only rarely used afterwards. Currently, the machine does not have the unit for back labeling installed, but it would be available if required. Technical data: Manufacturer: Gernep Model: Labetta 4/3/8 Year: 2001 Capacity: 8,000 bph Bottle type: Euro bottle - Control: Siemens S7, machine is frequency controlled via a FU - Inlet/outlet: left/right Please inquire for further data.

Homogenizer APV Rannie BLP 63.60 Manufacturer: APV Homogenisers AS Model: Rannie BLP 63.60 Machine Type: Homogenizer Serial number: 1.97.187 Year of Make: 1997 Max. pressure: 70 bar

Item No.: PD-DEF4-SM - Filter area 4m² - With integrated residual filtration and tilting rail for opening the pressure vessel - With new safety valve - Dosing pump HB 43 with stainless steel pump head - Thread 38Pf - 1 year functional warranty

Stretch wrapper Robopac type Helix HS40 with rotating arm speed: 45 - 50 pallets/hour voltage: 400 V top sheet cover insertion possible delivery without pallet transport and safety fencing

High-pressure injection system for your filler between filler outlet and infeed of the capping machine consisting essentially of: - High-pressure pump including frame - Heating system as well as valves - Nozzle unit - Electrical control cabinet - Pressure tank A technical description including pictures can be found in the attachment by an offer.

Strasbourg Labeling Service SES-120-II Hotmelt labeler for square and round containers, configured for 0.1 ltr, 0.25 ltr, and 0.5 ltr pocket bottles, etc., for square containers with 2 labels or for round containers with one label., Output up to 4,000 units per hour, worked until the end... ran only 10 times a year

Rinser AVE with 28 rinser stations 1-Kanla System Running direction: left - right with safety cladding Frequency-controlled

Empty Bottle Inspector Heuft InLine reflexx Release 9, Pre-sorting of the Heuft Spectrum SX TB 72 and the associated Gateway II (network connection) (output max. 72,000 bph; Built in 2009). The following types of bottles can currently be checked: • 0.33 l ale / green / KK • 0.33 l Ale / brown / KK • 0.50 l NRW / brown / KK • 0.50 l NRW / clear / SV • 0.50 l Euro / brown / KK • 0.33 l swing-top bottle / brown / embossing • 0.50 l swing-top bottle / brown The following checks are carried out: • Pre-sorting Heuft Spectrum SX TB 72: - Bottle shape - Bottle height • Empty bottle inspector Heuft InLine reflexx Release 9: - Sidewall inspection (inlet and outlet) - Muzzle inspection - Thread inspection - Soil inspection - Residual liquid (IR/HF) - Additional detection in the outlet for any sticking labels in the neck area - Test bottle detection T ...

Stainless steel tunnel pasteurizer - new Hermis type TP 20 capacity: 22.000 bph - 500 ml Product: beer Year of manufacturing: 2025 Treatment area: 74 m² Number of modules: 7 pcs Treatment length: 13.500 mm Total number of zones: 10 pcs Total width: 6.500 mm Total length incl. infeed / discharge conveyor: 15.000 mm Total number of zones: 10 pcs Heating system: Plate heat exchanger outside of the pasteurizer Steam pressure: 3 bar Electrical system: Siemens S 7 - 1200 The main conveyor of the pasteurizer is made of plastic - Movex - Italy Active transfer - Rexnord - Holland Plate heat exchanger in outside of pasteurizer - Funke - Germany Pumps, stainless steel - Lowara - Italy Spray Nozzles - Lechler - Germany Steam valve - Burket - Germany Air supply system - SMC - Germany Electro peumatic - Fest - Germany Electrical control - Klöckner / Möller or ...

CIP system 3x10HL, new

CIP system 2x10HL, new

CIP system 3x15HL, new

KEG wash and fill, 20-30 KEG/h, automatic, new

KEG wash and fill, 7-10 KEG/h, manual, new

Bottle washing machine O + H Contina type E44C / 302-110 year of manufacturing: 1995 capacity approx. 30.000 bph incl. Siemens S7 PLC control system incl. HMI touch panel incl. fully automatic bottle transport system incl. integrated safety systems and emergency stop incl. electrical control cabinet The machine is made of stainless steel and it is suitabble for returnable glass bottles. The machine is still in production until November 2026 in Germany.

Save energy and water, Efficient surface drying, Compact, powerful drying system, particularly energy efficient, Optional: with tunnel system, Areas of application:, • Water carryover, • Bottle neck drying, • Blowing off crown caps / flip-top bottles, • Can level blow-off, • Coding area drying, • Blow off dust, • Blowing off residual water for camera-supported control, Compact design in different versions:, • Band attachment (approx. 500 x 500 mm), • Rack mount, • Wall mount, Technical specifications:, • Max. power consumption 1,300 watts, • 230V connection, • Infinitely variable, • Ambient temperature 0-50°, • Storage temperature –40 to +85°, • 220 m3/hour or 3,666l/minute, • Overheating/overvoltage protection, Suitable e.g. for:, • Bottles, • Cans, • Beverage carton packaging, • Glasses, • Bowls, mugs, • Vacuum packaging

Capsule applicator and shrinker, make Enos, type Capsulatrice 1T., year 2015, for closing PVC capsules, with protective covering according to CE regulations, made of AISI 304 stainless steel,, Capacity: up to 2,500 bottles with PVC capsules,, up to 1,700 bottles for capsules made of aluminium, tinfoil, polyamine, This machine can be used for bottles of the formats:, Hmin= 230mm; Hmax= 370mm;, diameter min= 60mm; max= 110mm., Suitable shrink capsules should be made of PVC with dimensions:, Hmin= 35mm; Hmax= 70mm;, diameter min= 20mm; max= 40mm., The dimensions of the capsules used so far were:, H= 40mm; Diameter 32.5mm, The machine was used for the following bottle diameters:, 42mm; 52mm; 65mm and for a square bottle with LxW 45x45 mm., All moldings for these formats are for sale. Operating instructions are available., power: up to 2,500 bottles / hour, Dimensions / weight: L x W x H: app ...

Dosing device for liquid nitrogen, manufacturer Terboven, type LIN-Master-SCT, year 2018, to increase the pressure of bottles / cans filled with non-carbonated beverages,, for displacement of oxygen in the headspace of filled bottles / cans, glasses., electr. operation of the valve to release the dosage,, up to 28,000 containers / h are possible (depending on the dosing time), The device is installed in such a way that the liquid nitrogen outlet of the dosing device is centered over the container. This ensures that the full cross-section of the opening can be used., Different signal detections determine the exact position of each individual container and give a corresponding release signal to the dosing head., In order to keep the outlet area dry and free of ice, there is a continuous flushing with gaseous nitrogen.

Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously operated in a returnable glass production line. The machine is designed as a head machine with parallel bottle infeed and discharge and is suitable for high-speed labelling applications. The system is equipped with two labelling aggregates: one for neck and front labels and one for back labels. The neck label is applied using hot glue for closure sealing, while the remaining labels are applied using cold glue. The machine is fitted with two glue pumps and includes one spare hot glue unit. The back labelling station is disengageable, while the front station is permanently installed. With 36 bottle plates and a production capacity of up to 33,000 bottles per hour, the machine is suitable for demanding returnable glass operations. The machine has accumulated approximately 44,350 operating hours as of ...

Overview  This fill level and closure inspection unit was manufactured in 2014 by the German company Krones AG. The Krones Checkmat 731 was used for overfill and underfill detection based on high-frequency (HF) measurement as well as closure control for metal caps via sensor technology integrated into the filler. The system was recently dismantled in full working condition after being replaced by a newer camera-based inspection system. All peripheral components such as trigger light barriers, encoder, and pusher were properly disconnected and are included in the delivery. Technical data Inspection functions: Overfill and underfill detection using HF (high-frequency) method Closure control via integrated sensor for metal caps (mounted in filler) Condition: Excellent, fully functional before dismantling Status: Dismantled and stored, ready for shipment Application: Bottling lines for beve ...

Complete CSD PET Bottling Line – 12,400 BPH Manufactured: 2008–2009 | Location: Germany | Available: October 2026 This complete CSD (Carbonated Soft Drink) PET bottling line is designed for efficient and reliable production of carbonated beverages. The line is composed of high-quality European equipment from leading manufacturers such as SIPA, GEA Procomac, Arol, SMI, PE Labellers, Ventilo, Robopac, and TwinPak. The system is currently still in production, ensuring excellent operational condition and immediate demonstration possibilities. General Line Data Nominal Capacity: 12,400 bottles/hour Effective Capacity: approx. 10,000 bottles/hour Bottle Sizes: 0.5 L 0.75 L 1.5 L Bottle Type: Round PET bottles Cap Types Flat Cap: PCO 1881 Sport Cap: Aptar PCO 1881 Main Equipment Blow Molding Section Blow Molding Machine: SIPA – 8 cavity system Bottle Hand ...

Complete Glass Bottling Line for Hot Fill & Cold Fill (Krones / KHS) - Capacity: up to 33,000 bottles/hour (500 ml glass bottles) - YOM: 1999-2007 - many upgrades, see below! The system offers maximum flexibility, allowing hot fill, cold fill, still and carbonated beverages, and multiple bottle sizes. Important: The filler can also be used for PET bottles, offering additional production flexibility. Key Technical Data - Bottle Types - Glass bottles (non-returnable) - PET bottles can also be filled Bottle Sizes - 250 ml – 1000 ml Products - Fruit juices (orange, apple, tomato, etc.) - Hot fill beverages - Cold fill beverages - Carbonated soft drinks (CSD) Capping Types - 28 mm aluminium cap - 33 mm aluminium twist-off cap - 43 mm aluminium twist-off cap - (Twist-off capping machine included) Labelling Options - Paper labels with cold glue - Optional ...

Fresh Milk Pasteurisation & Bottling Line General Overview: Complete fresh milk processing and bottling line, designed for small to medium-scale dairy production. The line covers the full process from separation and pasteurisation to homogenisation, filling, and final packaging of 1L PET bottles. All components are industrial-grade and suitable for continuous operation. Process Flow: - Milk separation - Pasteurisation (flash system) - Homogenisation - Buffering / storage - Bottle handling and filling - Sealing, labelling, coding, and packaging Main Components & Technical Specifications: - Milk Cream Separator - Make: Seital - Model: SE13X - Capacity: 2,500 L/h - Year of Make: 1993 - Plate Heat Exchanger – Flash Pasteuriser - Make: KMA - Model: K21-FS/4273 - Capacity: 2,500 L/h (heating from 8°C to 75°C) - Year of Make: 1998 - Homoge ...

An empty bottle inspection machine Heuft including a pre-sorting unit Heuft Spectrum SX TB 72 and Gateway II is available. Inspector: rated throughput: 72000bottles/h, bottle types: Ale/NRW/Euro/Krombacher swing top/swing top, bottle colors: green/brown/clear, closure types: crown cap/screw cap/embossing, bottle volume: 330ml/500ml, pre-sorting: bottle type/bottle height, inspection types: sidewall/finish/thread/base/residual liquid/labels/test bottles. Including defective bottle reject systems and infeed and outfeed conveyor. Documentation available. An on-site inspection is possible.

Filler SEN Combi RE with124 filling station blocked with 20head Zalkin screw capper Capacity: 19.900 bph by 1,5 ltr. PET bottles Year of manufacturing: 1991 Isobaric filling system Bottle formats: 1,5 ltr. PET and 0,5 ltr. PET Work direction: left-right The machine is suitable to fill carbonated soft drinks. incl. cap feeding system: Gassner The machine is out of production but still connected.

Blow molding machine Kosme model: KSB 6R with 6 cavities year of manufacturing: 2017 neck size: PCO 1881 capacity: 12.000 bph container size: max. 3,0 ltr. including preform feeding system including chiller without blowing moulds already dismantled at the end of January 2026

In the steam chamber pasteurizer, bottles can be pasteurized in crates on pallets with hot steam. The parameters for the temperature rise and the holding time of the set pasteurization temperature can be set as desired. Condition: in working order, well-maintained Nominal capacity (1 l bottles): 480 bottles/h Electr. Power: 4.00 kW Connected loads: 400 V / 16 A / 50 Hz / 5-Ph Steam connection: 3/4 inch Compressed air connection: 6 bar Machine dimensions (WxDxH): 1400 x 2000 x 2700 mm Weight: 700 kg

Can filler Leibinger Type Canvasa Capacity: approx. 1.000 cph set up for standard cans - can type: 211 / 202 without can table with Siemens S 7 control system Counter pressure filling technology O2 Pickup: 10-60 ppb The machine has the footprint of a standard Euro pallet. The Canvas is a compact, semi-automatic can filling machine. Suitable for carbonated and still drinks. The filler is still in production in a brewery until July 2026 and can be inspected during production.

Overview  The swing top closing machine was built in 2004 by the German manufacturer Rico. The machine is still in operation and can be inspected at any time.  Technical data  Output: 12,000 bottles/h  Formats: 0.33 l (Steinie bottle)  14 capping stations  Running direction: clockwise Touch panel for operation  Control system: Siemens S7 

8-fold cartridge filter housing with new filter elements on request for an extra charge