BIG backhoe bucket 80 cm working width and teeth, fixed bolted, dimensions of the pick-up:, bolt diameter front [handle side]: 70 mm, bolt diameter rear [bone side]: 60 mm, handle/pick-up width: 280 mm, pick-up width at the bone: 260 mm, bolt spacing [center - middle]: 380 mm, suitable for 14-22 t excavators, further assortment of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Despised, JCB, Geith, etc. available.

Gasket set suitable for Hammer HM 200-250, also other gasket sets such as for HM300 / HM 1300 / HM 150 / HM250 available!

Incl. 3 buckets, 1x 80 cm with teeth, 1x 60 cm, 1x 30 cm, suitable for JCB 3CX

Replacement tooth suitable for Hammer RH25 demolition pulverizer

NEW, 2 pieces,, Tire spec: 335/80R18, Store (pieces): 4

200 cm working width, suitable for 15 - 23 t excavators, with screw-on reversible blade

suitable for forklift Telelader and wheel loader with standard Pallet rack attachment

Working width 35 cm, with Martin M10 mount

for 6 - 10 t excavator

NEW, 70 cm width, with Martin M03 mount, 99 kg dead weight, suitable for 2.8 - 3.9 t excavators

NEW, suitable for telescopic loader & Unimog wheel loader, 1 piece à € 400,-

NEW, 80 cm width, with Martin M03 mount, 125 kg dead weight, suitable for 2.8 - 3.9 t excavators

NEW, suitable for Martin HB100, Year of construction: 2019

NEW, 50 cm, with Martin M10 mount, 163 kg dead weight, suitable for 5.6 - 9 t excavators

NEW, Weidemann adapter suitable for Euro mounting, 150 kg net weight

NEW, 30 cm width, with Lehnhoff MS01 Symlock mount, 44 kg dead weight, suitable for 1.9 - 2.7 t excavators

NEW, 30 cm width, with Lehnhoff MS03 Symlock mount, 89 kg dead weight, suitable for 4 - 5.5 t excavators

NEW, 100 cm width, with Lehnhoff MS03 Symlock mount, 207 kg dead weight, suitable for 4.0 - 5.5 t excavators

NEW, 30 cm width, with Lehnhoff MS08 Symlock mount, 121 kg dead weight, suitable for 5.6 - 9.0 t excavators

NEW, 50 cm width, with Lehnhoff MS08 Symlock mount, 163 kg dead weight, suitable for 5.6 - 9 t excavators

NEW, 150 cm width, with Lehnhoff MS08 Symlock mount, 196 kg dead weight, suitable for 5.6 - 9 t excavators

50 cm width, receiving width: 20.5 cm, shaft spacing: approx. 20 cm, shaft diameter 40 mm

NEW, 250 cm width, 2.15 m³ capacity, 585 kg dead weight, with Merlo ZM2 attachment, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

NEW, 220 cm width, 550 kg deadweight, 1.90 m³ capacity, with Merlo ZM2 attachment, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

NEW, Genie / Terex adapter with Euro mount, 140 kg dead weight

NEW, 200 cm width, 493 kg dead weight, 1.75 m³ capacity, suitable for Merlo ZM2 attachment, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

NEW, 200 cm width, 493 kg weight, 1.75 m³ capacity, suitable for Manitou attachment, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!

NEW, width 200 cm, 250 kg dead weight, 0.70 m³ capacity, with Merlo attachment

Hammer pile driver suitable for HM500 with 120 mm inner diameter, photos are only an example !

100 mm diameter pile driver suitable for Hammer HM100