SOMA Midi 1270

MATERIAL:
∙ LDPE 0.020 – 0.160 mm
∙ PE / OPP 0.012 – 0.100 mm
∙ CPP 0.020 – 0.050 mm
∙ BOPP, PET, OPA 0.010 – 0.025 mm
∙ Paper 25 – 120 g/m2
∙ Laminate 0.02 – 0.12 mm


BASIC TECHNICAL PARAMETERS:

Max printing width: 1270 mm
Max material width: 1320 mm
Min material width: 500 mm
Min printing repeat: 360 mm
Max printing repeat: 800 mm

Anilox cylinder inner diam. 136,989 mm
perimeter 500 mm
sleeve length 1350 mm

Max. mechanical speed
300 m/min

Working printing speed
Tension in printed web: depends on kind and quality of printed material, printing inks, ink transfer, printing repeat length, printing plates, kind of printed motive: cross lines – screen density, anilox rollers volume, dot gain, lacquer, surrounding temperature and type of doctor blade chambers.
NON STOP 40 ÷ 360 N
without automatic exchange 10 ÷ 360 N
Side of operating staff
Unwind / Rewind roll parameters: on the left from longitudinal axis from unwinding to CI drum
max. roll diam. 800 mm
inner core diam. (paper ) 76 mm
outer core diam. (paper). 105 mm
max. roll weight 750 kg
Min. roll diameter at NONSTOP unwinding

Max. speed at roll exchange at NONSTOP 500 mm
unwinding . 100 m.min-1 (2)
Dimensions (w x l x h) 7130 x 12400 x 4870 mm
Weight ca 40 000 kg

Unwinding unit
• unwinding unit - NONSTOP - roll diam. of 800 mm
cutting unit – roll unwinding direction for printing from the upper web side cutting unit - roll unwinding direction for printing from the lower web side pneumatic shafts for inner core diam. of 76 mm
ionization system for electrostatic charge sensing
Web guiding system prior to printing
web guiding system prior to printing – ERHARDT & LEIMER
1 pc of ultrasonic sensor for web guiding acc. to the web edge on the operator's side
manual setting of sensor position according to gauge
Spreader roller prior to printing and rewinding
spreader roller prior to printing – spiral version with the centre in web axis
spreader roller prior to rewinding – segment version with the centre in line axis, located closely prior to
rewinding roll

Printing unit
• 8 pcs printing decks unit
„CDTS SYSTEM (Central Drum Thermal Stabilization)
„PPP SYSTEM (Printing Plate Protection)
pneumatic steel cores of printing cylinders, printing repeat length 360 mm, cylinders diam. 108,342 mm pneumatic steel cores of anilox cylinders, diam. 136,989 mm
portable control panel for step-by-step operation
FAST ADAPT self adapting chamber setting system
Ink pumping sytem

„ IPS SYSTEM (Ink Pressure Stabilization)
ink pumping units, containers volume of 25l with integrated IPS system container of 25l
pneumatic membrane pumps
connecting hoses with quick-acting couplings
Drying system
two-loops nozzle drying system
direct gas heating
automatic solvent vapour concentration inspection A51253474

Cooling unit
cooling A51253474 unit with 1 cooling cylinder and servodrive
servomotor with electronic transfer
closed cooling loop connected to the compressor cooling unit

Web guiding system prior to rewinding
web guiding system prior to rewinding - ERHARDT & LEIMER
1 pc – ultrasonic sensor for web guiding acc. to the web edge on operator's side
manual set-up of sensor position according to scale

Web video inspection system
1 chip digital camera BST SUPER HANDY SCAN 4000
FALCON II - Intelligent Job Setting System - automatic impression setting system
BST Smart register - semiautomatic register setting system
Rewinding unit
rewind unit - NONSTOP, roll diam. of 800 mm
cutting unit – roll rewinding direction for printing from the upper web side
pneumatic shafts for inner core diam. of 76 mm
lifting device integrated into unwind unit
ionization system for electrostatic charge sensing
cutting unit – roll rewinding direction for printing from the lower web side
jig for roll release

Control panels, distributors and software
module of fault diagnostics
communication module of service support
module with recipes - storing of job parameters
module of pre-recipes - pre-setting of recipes for easy job start
module of preventive maintenance - reminder for regular maintenance jobs

seller offer No. resale 20240702