We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- Band Saw Automatics (106)
- Band saw sharpening machines (10)
- Band Saws (141)
- Block Band Saws (5)
- Circular Cold Saws (64)
- Circular Sawing Automatics (31)
- Circular sawing machines for building sites (2)
- Circular Saws (58)
- Crosscut Saws (16)
- Double Miter Saws (30)
- Double mitre bandsaws (2)
- Fully Automatic Bandsaws (34)
- Fully Automatic Circular Saws (3)
- Fully Automatic Hacksaws (1)
- Hacksaw Automatics (5)
- Hacksaws (31)
- High Performance Bandsaws For Metal (1)
- Horizontal Band Sawing Machines (1)
- Horizontal Bandsaws (28)
- Hydraulic Metal Miter Band Sawing Machines (1)
- Longitudinal Circular Cold Sawing Machines (4)
- Metal Bandsaws (6)
- Metal Miter Band Sawing Machines (1)
- Metal Processing Circular Saws (19)
- Miter Bandsaws (13)
- Miter cut band saws (1)
- Miter Saws (14)
- Mitre cutting bandsaws (5)
- Oscillating stroke jigsaws (1)
- Other Sawing Machines (14)
- Pipe Cutters (8)
- Sawing Centres (1)
- Sawing Machines (8)
- Semi-automatic Band Saws (3)
- Special Purpose Sawing Machines (1)
- Table circular saws (1)
- Underfloor Saws (3)
- Vertical Band Sawing Machines (1)
- Vertical Bandsaws (40)
- more
- ABB (1)
- ADICE (1)
- ADIGE SYS (1)
- ALDURO (1)
- Amada (4)
- ANBAS (1)
- Arntz (3)
- AUDATECH (1)
- AXXAIR (3)
- AYEL-TECH (2)
- BAHCO (1)
- BAILEIGH (1)
- BAUER (11)
- BAUER - (1)
- BAYERWALD (1)
- Behringer (27)
- BEHRINGER - (1)
- BEHRINGER EISELE (1)
- BEHRINGER-EISELE (1)
- BEKA-MAK (5)
- BEKAMAK (1)
- BEMATO (1)
- BERA (1)
- Berg + Schmid (28)
- BERG-SCHMID (3)
- BERNADO (1)
- Bernardo (7)
- Bianco (7)
- BMSY (2)
- BOMAR (8)
- BOMAR WEIRA (1)
- BORA (1)
- BOSCH (1)
- BUEHLER (1)
- BULMAK (1)
- CARIF (1)
- CASADEI SCM (1)
- COMPACTSYSTEM (1)
- Cosen (2)
- DAIß (1)
- DANOBAT (1)
- DOALL (3)
- ECKERT (1)
- Eisele (29)
- EISELE - Halbautomat (3)
- ELEKTRA BECKUM (1)
- Elumatec (22)
- ELUMATEC ATLANTA SEM (1)
- EMCO (1)
- Emmegi (13)
- EMMEGI / PRESSTA EISLE (1)
- EMMERGI MORETTO (1)
- EPPLE (1)
- EYLTOOL (1)
- FCB (1)
- FEIN (5)
- FELDER (1)
- FEMI (2)
- Flamme (3)
- FLEX (3)
- FLOTT (5)
- FMB (1)
- FMB - JUPITER -FULL AUTO (1)
- FMB - ORION - AUTOFEED (1)
- FomIndustrie (2)
- FORTE (9)
- FORTUNA (1)
- FOSHAN (1)
- FRAMAG (1)
- FRIGGI (2)
- FRITZ GROSS (1)
- FUHO (1)
- GBS (1)
- GEMA (1)
- GEMMA GROUP - Halbautomat (2)
- GEORG FICHER (1)
- GEORG FISCHER (13)
- GEORG FISCHER (ORBITALUM) (1)
- Georg Fischer / Orbitalum (4)
- GEORG FISCHER/ ORBITALUM (1)
- GEORGE (1)
- GRAULE (4)
- HAFFNER (2)
- HAKUMAG (1)
- Hans Schreiner (2)
- HBM (4)
- HEBÖ (1)
- HELLER (2)
- HEMA (1)
- HESKA (6)
- HESSE by BEKA-MAK (5)
- HOLEX (1)
- HOMAG HOLZMA (1)
- HUVEMA (19)
- HUVEMA - HALBAUTOMAT (1)
- HYD MECH (1)
- IDEAL (1)
- Imet (5)
- ISTECH / DOALL (1)
- ITALMAC (1)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 105)
ABB 1
ADICE 1
ALDURO 1
Amada 4
ANBAS 1
Arntz 3
AUDATECH 1
AXXAIR 3
BAHCO 1
BAILEIGH 1
BAUER 11
BAUER - 1
Behringer 27
BEKA-MAK 5
BEKAMAK 1
BEMATO 1
BERA 1
BERNADO 1
Bernardo 7
Bianco 7
BMSY 2
BOMAR 8
BORA 1
BOSCH 1
BUEHLER 1
BULMAK 1
CARIF 1
Cosen 2
DAIß 1
DANOBAT 1
DOALL 3
ECKERT 1
Eisele 29
Elumatec 22
EMCO 1
Emmegi 13
EPPLE 1
EYLTOOL 1
FCB 1
FEIN 5
FELDER 1
FEMI 2
Flamme 3
FLEX 3
FLOTT 5
FMB 1
FORTE 9
FORTUNA 1
FOSHAN 1
FRAMAG 1
FRIGGI 2
FUHO 1
GBS 1
GEMA 1
GEORGE 1
GRAULE 4
HAFFNER 2
HAKUMAG 1
HBM 4
HEBÖ 1
HELLER 2
HEMA 1
HESKA 6
HOLEX 1
HUVEMA 19
HYD MECH 1
IDEAL 1
Imet 5
ITALMAC 1
Jaespa 18
JESPA 1
JäSPA 1
KA 1
KALTENBACH 62
KAMU 1
Karmetal 3
Kasto 61
KLAEGER 2
KLÄGER 2
KNUTH 4
KOELLE 2
Kölle 2
LEITZ 1
LENOX 1
LEUCO 1
MACC 11
MBH 2
MEBA 18
MECAL 2
MEP 80
MEP - 4
Metora 3
MIOTAL 11
MOESSNER 1
MOSSNER 1
MÖSSNER 15
NIKMANN 1
OHLER 1
OMGA 1
OMP 3
OPTIMUM 6
OSTERBERGER 13
OZGENC 2
PEGAS - 1
PEHAKA 5
Pertici 2
PILANA 1
PILOUS 2
POLAR 1
RAIM 1
RAPID 5
REICH 1
REMS 1
RIX 1
ROENTGEN 1
Rohbi 5
ROLLER 1
RUCOCCO 1
RUCOCO 1
Rurack 2
SABI 2
SAFAN 1
SALVAMAC 1
SAMUR 2
SANDERS 1
Schüco 3
SELECT 1
Silistra 2
SIMEC 1
SKIL 1
STAFF 1
Stahl 4
STARRETT 1
Stayer 2
STROMAB 1
TBA 1
TCM 1
THIEL 2
Thomas 4
THOMAS - 1
TUGRA 1
UKM 2
UKMS 1
UNIZ 1
UWM 1
V-TRADE 1
VEB WT 1
VOLLMER 1
Wagner 13
WAHLEN 1
WEGOMA 1
Weibert 5
Weipert 3
Wespa 2
WESTPHAL 1
Wikus 7
WINTER 20
WMT 3
WMW 2
WMW PWS 11
WRT 1
ZIMMER 17
ZKM 1
approved
dealer
dealer
SHARK 512 SXI evo, semi-automatic electro-hydraulic sawing machine with 4640x34x1,1 mm band, to cut pipes, profiles and beams up to 510×320 mm at 0°. Extremely versatile machine, for cuts between 60° left and 60° right. CUTTING CYCLE: after having positioned the bar, starting the cycle the following operations are performed: vice closing – motor start – head descent for cutting – motor stop – head return – vice opening. CYLCE DOWN UP: Operating in semiautomatic cycle , the new function DOWN makes the head and blade motor stop once the cut is finished with the vice closed, by pressing the UP button the head raises back to its starting point and the vice opens. ASK FOR EVERY MODEL OF MEP MACHINES, WE HAVE THE BEST PRICES IN EUROPE
approved
dealer
dealer
SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE
approved
dealer
dealer
SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE
approved
dealer
dealer
approved
dealer
dealer
Saw blade Ø: 355mm - Mitre angle max.: 45° - Motor power (kW): 3.50kW - Connection: 220V - Machine weight: 25kg
approved
dealer
dealer
Cutting diameter 90°: Ø 305 mm Cutting range at 90 degrees: square: 360x305 mm Cutting range at 45 degrees: round: Ø 265 mm Cutting range at 45 degrees: flat: 265x305 mm Cutting range at 60 degrees: round: Ø 175 mm Cutting range at 60 degrees: flat: 175x305 mm Table height: 700 mm Saw blade dimensions : 3830x27x0.9 mm Belt speed: 16-100 m/min Dimensions LxWxH: 2300 x 1450 x 1650 mm Total power requirement: 380 V , 1.1 kW Machine weight approx.: 780 kg Cut area at 90° cow: Ø 305 mm Cut area at 90° weight: 360 x 305 mm Cut area in area at 45° round: Ø 265 mm Cut area in width at 45° angle: 265 x 305 mm Cut area in width at 60° cow: Ø 175 mm Cut area in width at 60° angle: 175 x 305 mm Rubber bands: 3830 x 27 x 0.9 mm Sägebandgeschwindigkeit: 16 - 100 m/min Spaces: 2300 x 1450 x 1650 mm Sägeantrieb: 380 V, 1.1 kW Weight ±: 780 kg
approved
dealer
dealer
Saw blade Ø: 355mm - Mitre angle max.: 45° - Motor power (kW): 3.50kW - Connection: 220V - Machine weight: 25kg
approved
dealer
dealer
Equipped with coolant pump, On and including pallet
approved
dealer
dealer
Power: 3000W; Constant RPM: 900-1500rpm; Blade diameter: 255mm; Cutting angle 0-045; n.w. 23 kg
approved
dealer
dealer
approved
dealer
dealer
Equipped with material clamp, With both side roller tracks each 2 meters.
approved
dealer
dealer
Saw blade Ø: 355mm - Mitre angle max.: 45° - Motor power (kW): 3.50kW - Connection: 220V - Machine weight: 25kg
approved
dealer
dealer
approved
dealer
dealer
incl piece of feed conveyor and extra hydraulic bundle clamp
approved
dealer
dealer
ELU ALUMINUM MITRE SAW DOUBLE MINIMAL LUBRICATION SPEED 2 SPEEDS 2100/3800/MIN
approved
dealer
dealer
Manual control is missing, pallet and lashing strap not included.
approved
dealer
dealer
approved
dealer
dealer
Power: 3000W; Constant RPM: 900-1500rpm; Blade diameter: 255mm; Cutting angle 0-045; n.w. 23 kg
approved
dealer
dealer
Including inlet/outfeed roller conveyor, machine size approximately 850x750x1560mm.
approved
dealer
dealer
Power: 3000W; Constant RPM: 900-1500rpm; Blade diameter: 255mm; Cutting angle 0-045; n.w. 23 kg
approved
dealer
dealer
- Smallest diameter 10 mm- Shortes length singel stroke 15 mm- Shortes length automatic mode 100 mm- Working height 700 mm- Max. stroke 9999 mm- Control panel - Memory 99 program with - Bundel clamp device - New price 45.000
